realpage++;		page = realpage & this->pagemask;		/* Check, if we cross a chip boundary */		if (!page) {			chipnr++;			this->select_chip(mtd, -1);			this->select_chip(mtd, chipnr);		}		/* Check, if the chip supports auto page increment		 * or if we have hit a block boundary.		*/		if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))			sndcmd = 1;	}	/* Deselect and wake up anyone waiting on the device */	nand_release_device(mtd);	/*	 * Return success, if no ECC failures, else -EBADMSG	 * fs driver will take care of that, because	 * retlen == desired len and result == -EBADMSG	 */	*retlen = read;	return ecc_failed ? -EBADMSG : 0;}/** * nand_read_oob - [MTD Interface] NAND read out-of-band * @mtd:	MTD device structure * @from:	offset to read from * @len:	number of bytes to read * @retlen:	pointer to variable to store the number of read bytes * @buf:	the databuffer to put data * * NAND read out-of-band data from the spare area */static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf){	int i, col, page, chipnr;	struct nand_chip *this = mtd->priv;	int	blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;	DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);	/* Shift to get page */	page = (int)(from >> this->page_shift);	chipnr = (int)(from >> this->chip_shift);	/* Mask to get column */	col = from & (mtd->oobsize - 1);	/* Initialize return length value */	*retlen = 0;	/* Do not allow reads past end of device */	if ((from + len) > mtd->size) {		DEBUG (MTD_DEBUG_LEVEL0, "nand_read_oob: Attempt read beyond end of device\n");		*retlen = 0;		return -EINVAL;	}	/* Grab the lock and see if the device is available */	nand_get_device (this, mtd , FL_READING);	/* Select the NAND device */	this->select_chip(mtd, chipnr);	/* Send the read command */	this->cmdfunc (mtd, NAND_CMD_READOOB, col, page & this->pagemask);	/*	 * Read the data, if we read more than one page	 * oob data, let the device transfer the data !	 */	i = 0;	while (i < len) {		int thislen = mtd->oobsize - col;		thislen = min_t(int, thislen, len);		this->read_buf(mtd, &buf[i], thislen);		i += thislen;		/* Apply delay or wait for ready/busy pin		 * Do this before the AUTOINCR check, so no problems		 * arise if a chip which does auto increment		 * is marked as NOAUTOINCR by the board driver.		*/		if (!this->dev_ready)			udelay (this->chip_delay);		else			while (!this->dev_ready(mtd));		/* Read more ? */		if (i < len) {			page++;			col = 0;			/* Check, if we cross a chip boundary */			if (!(page & this->pagemask)) {				chipnr++;				this->select_chip(mtd, -1);				this->select_chip(mtd, chipnr);			}			/* Check, if the chip supports auto page increment			 * or if we have hit a block boundary.			*/			if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) {				/* For subsequent page reads set offset to 0 */				this->cmdfunc (mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);			}		}	}	/* Deselect and wake up anyone waiting on the device */	nand_release_device(mtd);	/* Return happy */	*retlen = len;	return 0;}/** * nand_read_raw - [GENERIC] Read raw data including oob into buffer * @mtd:	MTD device structure * @buf:	temporary buffer * @from:	offset to read from * @len:	number of bytes to read * @ooblen:	number of oob data bytes to read * * Read raw data including oob into buffer */int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen){	struct nand_chip *this = mtd->priv;	int page = (int) (from >> this->page_shift);	int chip = (int) (from >> this->chip_shift);	int sndcmd = 1;	int cnt = 0;	int pagesize = mtd->oobblock + mtd->oobsize;	int	blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;	/* Do not allow reads past end of device */	if ((from + len) > mtd->size) {		DEBUG (MTD_DEBUG_LEVEL0, "nand_read_raw: Attempt read beyond end of device\n");		return -EINVAL;	}	/* Grab the lock and see if the device is available */	nand_get_device (this, mtd , FL_READING);	this->select_chip (mtd, chip);	/* Add requested oob length */	len += ooblen;	while (len) {		if (sndcmd)			this->cmdfunc (mtd, NAND_CMD_READ0, 0, page & this->pagemask);		sndcmd = 0;		this->read_buf (mtd, &buf[cnt], pagesize);		len -= pagesize;		cnt += pagesize;		page++;		if (!this->dev_ready)			udelay (this->chip_delay);		else			while (!this->dev_ready(mtd));		/* Check, if the chip supports auto page increment */		if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))			sndcmd = 1;	}	/* Deselect and wake up anyone waiting on the device */	nand_release_device(mtd);	return 0;}/** * nand_prepare_oobbuf - [GENERIC] Prepare the out of band buffer * @mtd:	MTD device structure * @fsbuf:	buffer given by fs driver * @oobsel:	out of band selection structre * @autoplace:	1 = place given buffer into the oob bytes * @numpages:	number of pages to prepare * * Return: * 1. Filesystem buffer available and autoplacement is off, *    return filesystem buffer * 2. No filesystem buffer or autoplace is off, return internal *    buffer * 3. Filesystem buffer is given and autoplace selected *    put data from fs buffer into internal buffer and *    retrun internal buffer * * Note: The internal buffer is filled with 0xff. This must * be done only once, when no autoplacement happens * Autoplacement sets the buffer dirty flag, which * forces the 0xff fill before using the buffer again. **/static u_char * nand_prepare_oobbuf (struct mtd_info *mtd, u_char *fsbuf, struct nand_oobinfo *oobsel,		int autoplace, int numpages){	struct nand_chip *this = mtd->priv;	int i, len, ofs;	/* Zero copy fs supplied buffer */	if (fsbuf && !autoplace)		return fsbuf;	/* Check, if the buffer must be filled with ff again */	if (this->oobdirty) {		memset (this->oob_buf, 0xff,			mtd->oobsize << (this->phys_erase_shift - this->page_shift));		this->oobdirty = 0;	}	/* If we have no autoplacement or no fs buffer use the internal one */        if (!autoplace || !fsbuf) {                this->oobdirty = 1;                     // by mike.arm9, www.arm9.net                return this->oob_buf;        }	/* Walk through the pages and place the data */	this->oobdirty = 1;	ofs = 0;	while (numpages--) {		for (i = 0, len = 0; len < mtd->oobavail; i++) {			int to = ofs + oobsel->oobfree[i][0];			int num = oobsel->oobfree[i][1];			memcpy (&this->oob_buf[to], fsbuf, num);			len += num;			fsbuf += num;		}		ofs += mtd->oobavail;	}	return this->oob_buf;}#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0/** * nand_write - [MTD Interface] compability function for nand_write_ecc * @mtd:	MTD device structure * @to:		offset to write to * @len:	number of bytes to write * @retlen:	pointer to variable to store the number of written bytes * @buf:	the data to write * * This function simply calls nand_write_ecc with oob buffer and oobsel = NULL **/static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf){	return (nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL));}/** * nand_write_ecc - [MTD Interface] NAND write with ECC * @mtd:	MTD device structure * @to:		offset to write to * @len:	number of bytes to write * @retlen:	pointer to variable to store the number of written bytes * @buf:	the data to write * @eccbuf:	filesystem supplied oob data buffer * @oobsel:	oob selection structure * * NAND write with ECC */static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,			   size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel){	int startpage, page, ret = -EIO, oob = 0, written = 0, chipnr;	int autoplace = 0, numpages, totalpages;	struct nand_chip *this = mtd->priv;	u_char *oobbuf, *bufstart;	int	ppblock = (1 << (this->phys_erase_shift - this->page_shift));	DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);	/* Initialize retlen, in case of early exit */	*retlen = 0;	/* Do not allow write past end of device */	if ((to + len) > mtd->size) {		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n");		return -EINVAL;	}	/* reject writes, which are not page aligned */	if (NOTALIGNED (to) || NOTALIGNED(len)) {		printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");		return -EINVAL;	}	/* Grab the lock and see if the device is available */	nand_get_device (this, mtd, FL_WRITING);	/* Calculate chipnr */	chipnr = (int)(to >> this->chip_shift);	/* Select the NAND device */	this->select_chip(mtd, chipnr);	/* Check, if it is write protected */	if (nand_check_wp(mtd))		goto out;	/* if oobsel is NULL, use chip defaults */	if (oobsel == NULL)		oobsel = &mtd->oobinfo;	/* Autoplace of oob data ? Use the default placement scheme */	if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) {		oobsel = this->autooob;		autoplace = 1;	}	if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR)		autoplace = 1;	/* Setup variables and oob buffer */	totalpages = len >> this->page_shift;	page = (int) (to >> this->page_shift);	/* Invalidate the page cache, if we write to the cached page */	if (page <= this->pagebuf && this->pagebuf < (page + totalpages))		this->pagebuf = -1;	/* Set it relative to chip */	page &= this->pagemask;	startpage = page;	/* Calc number of pages we can write in one go */	numpages = min (ppblock - (startpage  & (ppblock - 1)), totalpages);	oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, autoplace, numpages);	bufstart = (u_char *)buf;	/* Loop until all data is written */	while (written < len) {		this->data_poi = (u_char*) &buf[written];		/* Write one page. If this is the last page to write		 * or the last page in this block, then use the		 * real pageprogram command, else select cached programming		 * if supported by the chip.		 */		ret = nand_write_page (mtd, this, page, &oobbuf[oob], oobsel, (--numpages > 0));		if (ret) {			DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: write_page failed %d\n", ret);			goto out;		}		/* Next oob page */		oob += mtd->oobsize;		/* Update written bytes count */		written += mtd->oobblock;		if (written == len)			goto cmp;		/* Increment page address */		page++;		/* Have we hit a block boundary ? Then we have to verify and		 * if verify is ok, we have to setup the oob buffer for		 * the next pages.		*/		if (!(page & (ppblock - 1))){			int ofs;			this->data_poi = bufstart;			ret = nand_verify_pages (mtd, this, startpage,				page - startpage,				oobbuf, oobsel, chipnr, (eccbuf != NULL));			if (ret) {				DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret);				goto out;			}			*retlen = written;			ofs = autoplace ? mtd->oobavail : mtd->oobsize;			if (eccbuf)				eccbuf += (page - startpage) * ofs;			totalpages -= page - startpage;			numpages = min (totalpages, ppblock);			page &= this->pagemask;			startpage = page;			oob = 0;			this->oobdirty = 1;			oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel,					autoplace, numpages);			/* Check, if we cross a chip boundary */			if (!page) {				chipnr++;				this->select_chip(mtd, -1);				this->select_chip(mtd, chipnr);			}		}	}	/* Verify the remaining pages */cmp:	this->data_poi = bufstart; 	ret = nand_verify_pages (mtd, this, startpage, totalpages,		oobbuf, oobsel, chipnr, (eccbuf != NULL));	if (!ret)		*retlen = written;	else		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret);out:	/* Deselect and wake up anyone waiting on the device */	nand_release_device(mtd);	return ret;}/* * NAND write */intnand_write_calmecc(struct mtd_info *mtd, loff_t to, size_t len,            size_t *retlen, const u_char *buf, unsigned int *pdwECCVal){	int i, page, col, cnt, status, chipnr;    	struct nand_chip *this = mtd->priv;    S3C2440_NAND * const s3c2440nand = S3C2440_GetBase_NAND();	DEBUG(MTD_DEBUG_LEVEL3,		"%s(): to = 0x%08x, len = %i\n", __FUNCTION__, (unsigned int)to,		(int) len);	/* Do not allow write past end of page */	if ((to + len) > mtd->size) {		DEBUG(MTD_DEBUG_LEVEL0,			"%s(): Attempted write past end of device\n", __FUNCTION__);		return -EINVAL;	}	/* Shift to get page */	page = ((int)to) >> this->page_shift;	/* Get the starting column */	col = to & (mtd->oobblock - 1);	/* Initialize return length value */	*retlen = 0;	/* Grab the lock and see if the device is available */	nand_get_device (this, mtd, FL_WRITING);	/* Calculate chipnr */	chipnr = (int)(to >> this->chip_shift);	/* Select the NAND device */	this->select_chip(mtd, chipnr);	/* Check, if it is write protected */	if (nand_check_wp(mtd))		goto nand_write_exit;