void ILI9328_SHARP 24_Initial(void)
{
// VCI=2.8V
//************* Reset LCD Driver ****************//
LCD_nRESET = 1;
delayms(1); // Delay 1ms
LCD_nRESET = 0;
delayms(10); // Delay 10ms // This delay time is necessary
LCD_nRESET = 1;
delayms(50); // Delay 50 ms
//************* Start Initial Sequence **********//
LCD_CtrlWrite_ILI9328(0x0010, 0x0000); 
LCD_CtrlWrite_ILI9328(0x0011, 0x0007); 
LCD_CtrlWrite_ILI9328(0x0012, 0x0000); 
LCD_CtrlWrite_ILI9328(0x0007, 0x0000); 
delayms(200);

LCD_CtrlWrive_ILI9328(0x0001, 0x0100); 
LCD_CtrlWrite_ILI9328(0x0002, 0x0700); 
LCD_CtrlWrite_ILI9328(0x0003, 0x1030); 
LCD_CtrlWrite_ILI9328(0x0004, 0x0000); 
LCD_CtrlWrite_ILI9328(0x0008, 0x0207); 
LCD_CtrlWrite_ILI9328(0x0009, 0x0000); 
LCD_CtrlWrite_ILI9328(0x000A, 0x0000); 
LCD_CtrlWrite_ILI9328(0x000C, 0x0000); 
LCD_CtrlWrite_ILI9328(0x000D, 0x0000); 
LCD_CtrlWrite_ILI9328(0x000F, 0x0000);
LCD_CtrlWrite_ILI9328(0x002B, 0x000C); 
LCD_CtrlWrite_ILI9328(0x0090, 0x0010); 
LCD_CtrlWrite_ILI9328(0x0092, 0x0600); 

 
LCD_CtrlWrite_ILI9328(0x0011, 0x0247); 
LCD_CtrlWrite_ILI9328(0x0013, 0x1800); 
LCD_CtrlWrite_ILI9328(0x0029, 0x002A); 
delayms(25); 
LCD_CtrlWrite_ILI9328(0x0010, 0x0190); 
delayms(25);
LCD_CtrlWrite_ILI9328(0x0012, 0x009E); 
delayms(25); 
 
// ----------- Adjust the Gamma Curve ----------//
LCD_CtrlWrite_ILI9328(0x0030, 0x0000);
LCD_CtrlWrite_ILI9328(0x0031, 0x0202);
LCD_CtrlWrite_ILI9328(0x0032, 0x0707);
LCD_CtrlWrite_ILI9328(0x0035, 0x0300);
LCD_CtrlWrite_ILI9328(0x0036, 0x0004);
LCD_CtrlWrite_ILI9328(0x0037, 0x0000);
LCD_CtrlWrite_ILI9328(0x0038, 0x0505);
LCD_CtrlWrite_ILI9328(0x0039, 0x0707);
LCD_CtrlWrite_ILI9328(0x003C, 0x0003);
LCD_CtrlWrite_ILI9328(0x003D, 0x0004);
//------------------ Set GRAM area ---------------//
LCD_CtrlWrite_ILI9328(0x0020, 0x0000); 
LCD_CtrlWrite_ILI9328(0x0021, 0x0000); 
LCD_CtrlWrite_ILI9328(0x0050, 0x0000); 
LCD_CtrlWrite_ILI9328(0x0051, 0x00EF); 
LCD_CtrlWrite_ILI9328(0x0052, 0x0000); 
LCD_CtrlWrite_ILI9328(0x0053, 0x013F); 
LCD_CtrlWrite_ILI9328(0x0060, 0xA700); 
LCD_CtrlWrite_ILI9328(0x0061, 0x0001); 
LCD_CtrlWrite_ILI9328(0x006A, 0x0000); 
//-------------- Partial Display Control ---------//
LCD_CtrlWrite_ILI9328(0x0080, 0x0000);
LCD_CtrlWrite_ILI9328(0x0081, 0x0000);
LCD_CtrlWrite_ILI9328(0x0082, 0x0000);
LCD_CtrlWrite_ILI9328(0x0083, 0x0000);
LCD_CtrlWrite_ILI9328(0x0084, 0x0000);
LCD_CtrlWrite_ILI9328(0x0085, 0x0000);

LCD_CtrlILI9328(0x0022);
delayms(20);
LCD_CtrlWrite_ILI9328(0x0010, 0x1190);
LCD_CtrlWrite_ILI9328(0x0007, 0x0133); 
}
void LCD_ExitSleep_ILI9328(void)
{
//*************Power On sequence ******************//
LCD_CtrlWrite_ILI9328(0x0010, 0x0080); 
LCD_CtrlWrite_ILI9328(0x0011, 0x0000); 
LCD_CtrlWrite_ILI9328(0x0012, 0x0000); 
LCD_CtrlWrite_ILI9328(0x0013, 0x0000); 
delayms(200); 
LCD_CtrlWrite_ILI9328(0x0010, 0x1490); 
LCD_CtrlWrite_ILI9328(0x0011, 0x0227); 
delayms(50); 
LCD_CtrlWrite_ILI9328(0x0012, 0x001C); 
delayms(50); 
LCD_CtrlWrite_ILI9328(0x0013, 0x1A00); 
LCD_CtrlWrite_ILI9328(0x0029, 0x0025); 
delayms(50); 
LCD_CtrlWrite_ILI9328(0x0007, 0x0133);
}

//------LCD_EnterSleep_ILI9328--------//
{
LCD_CtrlWrite_ILI9328(0x0007, 0x0131);
delayms(10);
LCD_CtrlWrite_ILI9328(0x0007, 0x0130);
delayms(10);
LCD_CtrlWrite_ILI9328(0x0007, 0x0000);
//---------power off sequence----//
LCD_CtrlWrite_ILI9328(0x0010, 0x0080);
LCD_CtrlWrite_ILI9328(0x0011, 0x0000);
LCD_CtrlWrite_ILI9328(0x0012, 0x0000);
LCD_CtrlWrite_ILI9328(0x0013, 0x0000);
delayms(200);
LCD_CtrlWrite_ILI9328(0x0010, 0x0082);
}