// TI File $Revision: /main/7 $
// Checkin $Date: August 13, 2007   16:57:59 $
//###########################################################################
//
// FILE:   DSP2833x_Examples.h
//
// TITLE:  DSP2833x Device Definitions.
//
//###########################################################################
// $TI Release: DSP2833x Header Files V1.01 $
// $Release Date: September 26, 2007 $
//###########################################################################

#ifndef DSP2833x_EXAMPLES_H
#define DSP2833x_EXAMPLES_H


#ifdef __cplusplus
extern "C" {
#endif


/*-----------------------------------------------------------------------------
      Specify the PLL control register (PLLCR) and divide select (DIVSEL) value.
-----------------------------------------------------------------------------*/
//#define DSP28_DIVSEL   0   // Enable /4 for SYSCLKOUT
//#define DSP28_DIVSEL   1 // Disable /4 for SYSCKOUT
#define DSP28_DIVSEL     2 // Enable /2 for SYSCLKOUT
//#define DSP28_DIVSEL     3 // Enable /1 for SYSCLKOUT

//#define DSP28_PLLCR   10
//#define DSP28_PLLCR    9
//#define DSP28_PLLCR    8
//#define DSP28_PLLCR    7
//#define DSP28_PLLCR    6
//#define DSP28_PLLCR    5
//#define DSP28_PLLCR    4
//#define DSP28_PLLCR    3
#define DSP28_PLLCR    2
//#define DSP28_PLLCR    1
//#define DSP28_PLLCR    0  // PLL is bypassed in this mode
//----------------------------------------------------------------------------


/*-----------------------------------------------------------------------------
      Specify the clock rate of the CPU (SYSCLKOUT) in nS.

      Take into account the input clock frequency and the PLL multiplier
      selected in step 1.

      Use one of the values provided, or define your own.
      The trailing L is required tells the compiler to treat
      the number as a 64-bit value.

      Only one statement should be uncommented.

      Example 1:150 MHz devices:
                CLKIN is a 30MHz crystal.

                In step 1 the user specified PLLCR = 0xA for a
                150Mhz CPU clock (SYSCLKOUT = 150MHz).

                In this case, the CPU_RATE will be 6.667L
                Uncomment the line:  #define CPU_RATE  6.667L

      Example 2:  100 MHz devices:
                  CLKIN is a 20MHz crystal.

	              In step 1 the user specified PLLCR = 0xA for a
	              100Mhz CPU clock (SYSCLKOUT = 100MHz).

	              In this case, the CPU_RATE will be 10.000L
                  Uncomment the line:  #define CPU_RATE  10.000L
-----------------------------------------------------------------------------*/
#define CPU_RATE    6.667L   // for a 150MHz CPU clock speed (SYSCLKOUT)
//#define CPU_RATE    7.143L   // for a 140MHz CPU clock speed (SYSCLKOUT)
//#define CPU_RATE    8.333L   // for a 120MHz CPU clock speed (SYSCLKOUT)
//#define CPU_RATE   10.000L   // for a 100MHz CPU clock speed (SYSCLKOUT)
//#define CPU_RATE   13.330L   // for a 75MHz CPU clock speed (SYSCLKOUT)
//#define CPU_RATE   20.000L   // for a 50MHz CPU clock speed  (SYSCLKOUT)
//#define CPU_RATE   33.333L   // for a 30MHz CPU clock speed  (SYSCLKOUT)
//#define CPU_RATE   41.667L   // for a 24MHz CPU clock speed  (SYSCLKOUT)
//#define CPU_RATE   50.000L   // for a 20MHz CPU clock speed  (SYSCLKOUT)
//#define CPU_RATE   66.667L   // for a 15MHz CPU clock speed  (SYSCLKOUT)
//#define CPU_RATE  100.000L   // for a 10MHz CPU clock speed  (SYSCLKOUT)

//----------------------------------------------------------------------------

/*-----------------------------------------------------------------------------
      Target device (in DSP2833x_Device.h) determines CPU frequency
      (for examples) - either 150 MHz (for 28335 and 28334) or 100 MHz
      (for 28332). User does not have to change anything here.
-----------------------------------------------------------------------------*/
#if DSP28_28332                   // DSP28_28332 device only
  #define CPU_FRQ_100MHZ    1     // 100 Mhz CPU Freq (20 MHz input freq)
  #define CPU_FRQ_150MHZ    0
#else
  #define CPU_FRQ_100MHZ    0     // DSP28_28335||DSP28_28334
  #define CPU_FRQ_150MHZ    1     // 150 MHz CPU Freq (30 MHz input freq) by DEFAULT
#endif


//MemCopy(&RamfuncsLoadStart, &RamfuncsLoadEnd, &RamfuncsRunStart);
//---------------------------------------------------------------------------
// Include Example Header Files:
//

#include "DSP2833x_GlobalPrototypes.h"         // Prototypes for global functions within the
                                              // .c files.

#include "DSP2833x_ePwm_defines.h"             // Macros used for PWM examples.
#include "DSP2833x_Dma_defines.h"              // Macros used for DMA examples.
#include "DSP2833x_I2C_defines.h"              // Macros used for I2C examples.

#define PARTNO_28335  0xFA
#define PARTNO_28334  0xF9
#define PARTNO_28332  0xF8


// Include files not used with DSP/BIOS
#ifndef DSP28_BIOS
#include "DSP2833x_DefaultISR.h"
#endif


// DO NOT MODIFY THIS LINE.
#define DELAY_US(A)  DSP28x_usDelay(((((long double) A * 1000.0L) / (long double)CPU_RATE) - 9.0L) / 5.0L)


#ifdef __cplusplus
}
#endif /* extern "C" */

#endif  // end of DSP2833x_EXAMPLES_H definition


//===========================================================================
// End of file.
//===========================================================================