/* * (C) Copyright 2007 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * Configuation settings for the LPC2292SODIMM board from Embedded Artists. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#ifndef __CONFIG_H#define __CONFIG_H/* * If we are developing, we might want to start u-boot from ram * so we MUST NOT initialize critical regs like mem-timing ... */#undef CONFIG_INIT_CRITICAL		/* undef for developing */#undef CONFIG_SKIP_LOWLEVEL_INIT#undef CONFIG_SKIP_RELOCATE_UBOOT/* * High Level Configuration Options * (easy to change) */#define CONFIG_ARM7		1	/* This is a ARM7 CPU	*/#define CONFIG_ARM_THUMB	1	/* this is an ARM720TDMI */#define CONFIG_LPC2292#undef	CONFIG_ARM7_REVD		/* disable ARM720 REV.D Workarounds */#undef CONFIG_USE_IRQ			/* don't need them anymore *//* * Size of malloc() pool */#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data *//* * Hardware drivers *//* * select serial console configuration */#define CONFIG_SERIAL1		1	/* we use Serial line 1 *//* allow to overwrite serial and ethaddr */#define CONFIG_ENV_OVERWRITE#define CONFIG_BAUDRATE		115200/* * BOOTP options */#define CONFIG_BOOTP_SUBNETMASK#define CONFIG_BOOTP_GATEWAY#define CONFIG_BOOTP_HOSTNAME#define CONFIG_BOOTP_BOOTPATH#define CONFIG_BOOTP_BOOTFILESIZE/* * Command line configuration. */#include <config_cmd_default.h>#define CONFIG_CMD_DHCP#define CONFIG_CMD_FAT#define CONFIG_CMD_MMC#define CONFIG_CMD_NET#define CONFIG_CMD_PING#define CONFIG_MAC_PARTITION#define CONFIG_DOS_PARTITION#define CONFIG_BOOTDELAY	5/* * Miscellaneous configurable options */#define	CFG_LONGHELP				/* undef to save memory		*/#define	CFG_PROMPT		"LPC2292SODIMM # " /* Monitor Command Prompt	*/#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */#define	CFG_MAXARGS		16		/* max number of command args	*/#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/#define CFG_MEMTEST_START	0x40000000	/* memtest works on	*/#define CFG_MEMTEST_END		0x40000000	/* 4 ... 8 MB in DRAM	*/#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */#define	CFG_LOAD_ADDR		0x00040000	/* default load address	for	*/						/* armadillo: kernel img is here*/#define CFG_SYS_CLK_FREQ	58982400	/* Hz */#define	CFG_HZ			2048		/* decrementer freq in Hz */						/* valid baudrates */#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }/*----------------------------------------------------------------------- * Stack sizes * * The stack sizes are set up in start.S using the settings below */#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */#ifdef CONFIG_USE_IRQ#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */#endif/*----------------------------------------------------------------------- * Physical Memory Map */#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */#define PHYS_SDRAM_1		0x81000000 /* SDRAM Bank #1 */#define PHYS_SDRAM_1_SIZE	0x00800000 /* 8 MB SDRAM */#define PHYS_FLASH_1		0x80000000 /* Flash Bank #1 */#define PHYS_FLASH_SIZE		0x00200000 /* 2 MB */#define CFG_FLASH_BASE		PHYS_FLASH_1/*----------------------------------------------------------------------- * FLASH and environment organization */#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/#define CFG_MAX_FLASH_SECT	1024	/* max number of sectors on one chip	*//* timeout values are in ticks */#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */#define	CFG_ENV_IS_IN_FLASH	1#define CFG_ENV_ADDR		(0x0 + 0x3C000)	/* Addr of Environment Sector	*/#define CFG_ENV_SIZE		0x2000 /* Total Size of Environment Sector	*/#define CONFIG_CMDLINE_TAG#define CONFIG_SETUP_MEMORY_TAGS#define CONFIG_INITRD_TAG#define CONFIG_MMC 1/* we use this ethernet chip */#define CONFIG_ENC28J60#endif	/* __CONFIG_H */