.include"8535def.inc"    
       rjmp  RESET
tab:.dw 0,78,157,236,314,393,466,541,616
    .dw 692,769,847,927,1009,1092,1177,1266
RESET:mov  r20,r16         ;A/D結果低6位送r20
      andi r20,$3f
      rol  r16             ;取A/D結果高4位送r17
      rol  r17
      rol  r16
      rol  r17
      add  r17,r17         ;r17*2
      ldi  Zh,high(tab*2)  ;取y1送r19:r18
      ldi  Zl,low(tab*2)      
      add  Zl,r17
      lpm
      mov  r18,r0
      adiw Zl,1
      lpm
      mov  r19,r0
      adiw Zl,1            ;取y2送r17:r16
      lpm
      mov  r16,r0
      adiw Zl,1
      lpm
      mov  r17,r0
      sub  r16,r18         ;求y2-y1
      sbc  r17,r19
      mov  r23,r18         ;保存y1送r24:r23
      mov  r24,r19
      mov  r18,r20         ;求（y2-y1)*(x-x1)/64
      clr  r19
      rcall mpy16s
      rol  r18
      rol  r19
      rol  r20
      rol  r18
      rol  r19
      rol  r20
      add  r23,r19         ;求y
      adc  r24,r20
here: rjmp here

mpy16s:	                   ;16位*16位帶符號乘法
      clr	r21        ;清結果和進位位
      sub	r20,r20	
      ldi	r22,16	   ;初始化循環計數器
m16s_1:
      brcc	m16s_2	   ;進位位為 0 ，跳至m16s-2	
      add	r20,r16	   ;進位位為 1 
      adc	r21,r17	   ;結果3字節2字節加被乘數
m16s_2:
      sbrc	r18,0      ;如果當前位置位
      sub	r20,r16	   ;從結果字節2中減被乘數低字節
      sbrc	r18,0	   ;如果當前位置位
      sbc	r21,r17	   ;從結果字節2中減被乘數低字節
      asr	r21        ;算術右移結果和乘數
      ror	r20
      ror	r19
      ror	r18
      dec	r22        ;循環計數器減 1 
      brne	m16s_1     ;如沒完成，再循環	
      ret