;	“模仿式”	實驗四  V/F壓頻轉換實驗


;文件名:B04.ASM

;定時器0作定時器,定時器1對外部輸入脈沖進行計數并把計數值顯示于數碼管上.

OUTBIT   equ 0e101h  ; 位控制口
CLK164   equ 0e102h  ; 段控制口(接164時鐘位)
DAT164   equ 0e102h  ; 段控制口(接164數據位)
IN       equ 0e103h  ; 鍵盤讀入口
LEDBuf   equ   40h   ; 顯示緩沖

        ORG 0000h
	SJMP MAIN
	ORG 000BH		;定時器0中斷入口地址
	LJMP INTER0
	org 0030h
MAIN:
	mov sp,#60h
	mov dptr,#0e100h     ;8155初始化
	mov a,#03h
        movx @dptr,a
	MOV TMOD,#51H 		;定時器初始化
	MOV TH0,#3CH
	MOV TL0,#0B7H
	MOV TL1,#00H
	MOV TH1,#00H
	MOV 23H,#00H
	ORL IE,#82H
	MOV TCON,#50H
	MOV 50H,#00H
	MOV 51H,#00H
LOOP0: MOV R2,50H
	MOV R3,51H
	LCALL LOOP1		;調用二進制轉十進制子程序
	MOV R0,#40H		;轉換結果送顯示緩沖器
	MOV A,R6
	LCALL PTDS
	MOV A,R5
	LCALL PTDS
	MOV A,R4
	LCALL PTDS
	LCALL DISPLAY		;調用顯示子程序
	SJMP LOOP0
LOOP1:	CLR A			;二進制轉十進制子程序
	MOV R4,A
	MOV R5,A
	MOV R6,A
	MOV R7,#10H
LOOP2:	CLR C
	MOV A,R3
	RLC A
	MOV R3,A
	MOV A,R2
	RLC A
	MOV R2,A
	MOV A,R6
	ADDC A,R6
	DA A
	MOV R6,A
	MOV A,R5
	ADDC A,R5
	DA A
	MOV R5,A
	MOV A,R4
	ADDC A,R4
	DA A
	MOV R4,A
	DJNZ R7,LOOP2
	RET
PTDS:	MOV R1,A
	ACALL PTDS1
	MOV A,R1
	SWAP A
PTDS1:	ANL A,#0FH
	MOV @R0,A
	INC R0
	RET
Delay:
        mov   r7, #0          ; 延時子程序

DelayLoop:
        djnz  r7, DelayLoop
        djnz  r6, DelayLoop
        ret

DISPLAY:setb 0d3h
        mov   r0, #LEDBuf
        mov   r1, #6          ; 共6個八段管
        mov   r2, #00000001b  ; 從左邊開始顯示
Loop:
        mov   dptr, #OUTBIT
        mov   a, #00h
        movx  @dptr, a        ; 關所有八段管

        mov   a, @r0
        mov dptr,#LEDmap
        movc a,@a+dptr
        mov   B, #8           ; 送164
DLP:
        rlc   a
        mov   r3, a
        mov   acc.0, c
        anl  a,#0fdh
        mov   dptr, #DAT164
        movx  @dptr, a
        mov   dptr, #CLK164
        orl a,#03h
        movx  @dptr, a
        anl a,#0fDh
        movx  @dptr, a
        mov   a, r3
        djnz  B, DLP
        mov   dptr, #OUTBIT
        mov   a, r2
        movx  @dptr, a        ; 顯示一位八段管
        mov   r6, #1
        call  Delay
        mov   a, r2           ; 顯示下一位
        rl    a
        mov   r2, a
        inc   r0
        djnz  r1, Loop
        mov   dptr, #OUTBIT
        mov   a, #0
        movx  @dptr, a
        clr 0d3h        ; 關所有八段管
        ret
LEDMAP:                       ; 八段管顯示碼
       db    3fh, 06h, 5bh, 4fh, 66h, 6dh, 7dh, 07h
       db    7fh, 6fh, 77h, 7ch, 39h, 5eh, 79h, 71h

INTER0:	CLR TR0			;定時器0中斷處理子程序
	MOV TL0,#0B7H
	MOV TH0,#3CH
	INC 23H
	MOV A,23H
	CJNE A,#0AH,ZOO1
	MOV 23H,#00H
	MOV 50H,TH1
	MOV 51H,TL1
	MOV TL1,#00H

	MOV TH1,#00H
ZOO1:	SETB TR0
	RETI