/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
* File Name          : stm32f10x_adc.c
* Author             : MCD Application Team
* Version            : V2.0.2
* Date               : 07/11/2008
* Description        : This file provides all the ADC firmware functions.
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_adc.h"
#include "stm32f10x_rcc.h"

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* ADC DISCNUM mask */
#define CR1_DISCNUM_Reset           ((u32)0xFFFF1FFF)

/* ADC DISCEN mask */
#define CR1_DISCEN_Set              ((u32)0x00000800)
#define CR1_DISCEN_Reset            ((u32)0xFFFFF7FF)

/* ADC JAUTO mask */
#define CR1_JAUTO_Set               ((u32)0x00000400)
#define CR1_JAUTO_Reset             ((u32)0xFFFFFBFF)

/* ADC JDISCEN mask */
#define CR1_JDISCEN_Set             ((u32)0x00001000)
#define CR1_JDISCEN_Reset           ((u32)0xFFFFEFFF)

/* ADC AWDCH mask */
#define CR1_AWDCH_Reset             ((u32)0xFFFFFFE0)

/* ADC Analog watchdog enable mode mask */
#define CR1_AWDMode_Reset           ((u32)0xFF3FFDFF)

/* CR1 register Mask */
#define CR1_CLEAR_Mask              ((u32)0xFFF0FEFF)

/* ADC ADON mask */
#define CR2_ADON_Set                ((u32)0x00000001)
#define CR2_ADON_Reset              ((u32)0xFFFFFFFE)

/* ADC DMA mask */
#define CR2_DMA_Set                 ((u32)0x00000100)
#define CR2_DMA_Reset               ((u32)0xFFFFFEFF)

/* ADC RSTCAL mask */
#define CR2_RSTCAL_Set              ((u32)0x00000008)

/* ADC CAL mask */
#define CR2_CAL_Set                 ((u32)0x00000004)

/* ADC SWSTART mask */
#define CR2_SWSTART_Set             ((u32)0x00400000)

/* ADC EXTTRIG mask */
#define CR2_EXTTRIG_Set             ((u32)0x00100000)
#define CR2_EXTTRIG_Reset           ((u32)0xFFEFFFFF)

/* ADC Software start mask */
#define CR2_EXTTRIG_SWSTART_Set     ((u32)0x00500000)
#define CR2_EXTTRIG_SWSTART_Reset   ((u32)0xFFAFFFFF)

/* ADC JEXTSEL mask */
#define CR2_JEXTSEL_Reset           ((u32)0xFFFF8FFF)

/* ADC JEXTTRIG mask */
#define CR2_JEXTTRIG_Set            ((u32)0x00008000)
#define CR2_JEXTTRIG_Reset          ((u32)0xFFFF7FFF)

/* ADC JSWSTART mask */
#define CR2_JSWSTART_Set            ((u32)0x00200000)

/* ADC injected software start mask */
#define CR2_JEXTTRIG_JSWSTART_Set   ((u32)0x00208000)
#define CR2_JEXTTRIG_JSWSTART_Reset ((u32)0xFFDF7FFF)

/* ADC TSPD mask */
#define CR2_TSVREFE_Set             ((u32)0x00800000)
#define CR2_TSVREFE_Reset           ((u32)0xFF7FFFFF)

/* CR2 register Mask */
#define CR2_CLEAR_Mask              ((u32)0xFFF1F7FD)

/* ADC SQx mask */
#define SQR3_SQ_Set                 ((u32)0x0000001F)
#define SQR2_SQ_Set                 ((u32)0x0000001F)
#define SQR1_SQ_Set                 ((u32)0x0000001F)

/* SQR1 register Mask */
#define SQR1_CLEAR_Mask             ((u32)0xFF0FFFFF)

/* ADC JSQx mask */
#define JSQR_JSQ_Set                ((u32)0x0000001F)

/* ADC JL mask */
#define JSQR_JL_Set                 ((u32)0x00300000)
#define JSQR_JL_Reset               ((u32)0xFFCFFFFF)

/* ADC SMPx mask */
#define SMPR1_SMP_Set               ((u32)0x00000007)
#define SMPR2_SMP_Set               ((u32)0x00000007)

/* ADC JDRx registers offset */
#define JDR_Offset                  ((u8)0x28)

/* ADC1 DR register base address */
#define DR_ADDRESS                  ((u32)0x4001244C)

/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/

/*******************************************************************************
* Function Name  : ADC_DeInit
* Description    : Deinitializes the ADCx peripheral registers to their default
*                  reset values.
* Input          : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
* Output         : None
* Return         : None
*******************************************************************************/
void ADC_DeInit(ADC_TypeDef* ADCx)
{
  /* Check the parameters */
  assert_param(IS_ADC_ALL_PERIPH(ADCx));

  switch (*(u32*)&ADCx)
  {
    case ADC1_BASE:
      /* Enable ADC1 reset state */
      RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE);
      /* Release ADC1 from reset state */
      RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE);
      break;
    
    case ADC2_BASE:
      /* Enable ADC2 reset state */
      RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, ENABLE);
      /* Release ADC2 from reset state */
      RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, DISABLE);
      break;
      
    case ADC3_BASE:
      /* Enable ADC3 reset state */
      RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, ENABLE);
      /* Release ADC3 from reset state */
      RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, DISABLE);
      break; 

    default:
      break;
  }
}

/*******************************************************************************
* Function Name  : ADC_Init
* Description    : Initializes the ADCx peripheral according to the specified parameters
*                  in the ADC_InitStruct.
* Input          : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
*                  - ADC_InitStruct: pointer to an ADC_InitTypeDef structure that
*                    contains the configuration information for the specified
*                    ADC peripheral.
* Output         : None
* Return         : None
******************************************************************************/
void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct)
{
  u32 tmpreg1 = 0;
  u8 tmpreg2 = 0;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_PERIPH(ADCx));
  assert_param(IS_ADC_MODE(ADC_InitStruct->ADC_Mode));
  assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode));
  assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode));  		    
  assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv));   
  assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign)); 
  assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfChannel));

  /*---------------------------- ADCx CR1 Configuration -----------------*/
  /* Get the ADCx CR1 value */
  tmpreg1 = ADCx->CR1;
  /* Clear DUALMOD and SCAN bits */
  tmpreg1 &= CR1_CLEAR_Mask;
  /* Configure ADCx: Dual mode and scan conversion mode */
  /* Set DUALMOD bits according to ADC_Mode value */
  /* Set SCAN bit according to ADC_ScanConvMode value */
  tmpreg1 |= (u32)(ADC_InitStruct->ADC_Mode | ((u32)ADC_InitStruct->ADC_ScanConvMode << 8));
  /* Write to ADCx CR1 */
  ADCx->CR1 = tmpreg1;

  /*---------------------------- ADCx CR2 Configuration -----------------*/
  /* Get the ADCx CR2 value */
  tmpreg1 = ADCx->CR2;
  /* Clear CONT, ALIGN and EXTSEL bits */
  tmpreg1 &= CR2_CLEAR_Mask;
  /* Configure ADCx: external trigger event and continuous conversion mode */
  /* Set ALIGN bit according to ADC_DataAlign value */
  /* Set EXTSEL bits according to ADC_ExternalTrigConv value */
  /* Set CONT bit according to ADC_ContinuousConvMode value */
  tmpreg1 |= (u32)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv |
            ((u32)ADC_InitStruct->ADC_ContinuousConvMode << 1));
  /* Write to ADCx CR2 */
  ADCx->CR2 = tmpreg1;

  /*---------------------------- ADCx SQR1 Configuration -----------------*/
  /* Get the ADCx SQR1 value */
  tmpreg1 = ADCx->SQR1;
  /* Clear L bits */
  tmpreg1 &= SQR1_CLEAR_Mask;
  /* Configure ADCx: regular channel sequence length */
  /* Set L bits according to ADC_NbrOfChannel value */
  tmpreg2 |= (ADC_InitStruct->ADC_NbrOfChannel - 1);
  tmpreg1 |= ((u32)tmpreg2 << 20);
  /* Write to ADCx SQR1 */
  ADCx->SQR1 = tmpreg1;
}

/*******************************************************************************
* Function Name  : ADC_StructInit
* Description    : Fills each ADC_InitStruct member with its default value.
* Input          : ADC_InitStruct : pointer to an ADC_InitTypeDef structure
*                  which will be initialized.
* Output         : None
* Return         : None
*******************************************************************************/
void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct)
{
  /* Reset ADC init structure parameters values */
  /* Initialize the ADC_Mode member */
  ADC_InitStruct->ADC_Mode = ADC_Mode_Independent;

  /* initialize the ADC_ScanConvMode member */
  ADC_InitStruct->ADC_ScanConvMode = DISABLE;

  /* Initialize the ADC_ContinuousConvMode member */
  ADC_InitStruct->ADC_ContinuousConvMode = DISABLE;

  /* Initialize the ADC_ExternalTrigConv member */
  ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1;

  /* Initialize the ADC_DataAlign member */
  ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right;

  /* Initialize the ADC_NbrOfChannel member */
  ADC_InitStruct->ADC_NbrOfChannel = 1;
}

/*******************************************************************************
* Function Name  : ADC_Cmd
* Description    : Enables or disables the specified ADC peripheral.
* Input          : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
*                  - NewState: new state of the ADCx peripheral. This parameter
*                    can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_ADC_ALL_PERIPH(ADCx));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    /* Set the ADON bit to wake up the ADC from power down mode */
    ADCx->CR2 |= CR2_ADON_Set;
  }
  else
  {
    /* Disable the selected ADC peripheral */
    ADCx->CR2 &= CR2_ADON_Reset;
  }
}

/*******************************************************************************
* Function Name  : ADC_DMACmd
* Description    : Enables or disables the specified ADC DMA request.
* Input          : - ADCx: where x can be 1 or 3 to select the ADC peripheral.
*                    Note: ADC2 hasn't a DMA capability.
*                  - NewState: new state of the selected ADC DMA transfer.
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_ADC_DMA_PERIPH(ADCx));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    /* Enable the selected ADC DMA request */
    ADCx->CR2 |= CR2_DMA_Set;
  }
  else
  {
    /* Disable the selected ADC DMA request */
    ADCx->CR2 &= CR2_DMA_Reset;
  }
}

/*******************************************************************************
* Function Name  : ADC_ITConfig
* Description    : Enables or disables the specified ADC interrupts.
* Input          : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
*                  - ADC_IT: specifies the ADC interrupt sources to be enabled
*                    or disabled. 
*                    This parameter can be any combination of the following values:
*                       - ADC_IT_EOC: End of conversion interrupt mask
*                       - ADC_IT_AWD: Analog watchdog interrupt mask
*                       - ADC_IT_JEOC: End of injected conversion interrupt mask
*                  - NewState: new state of the specified ADC interrupts.
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void ADC_ITConfig(ADC_TypeDef* ADCx, u16 ADC_IT, FunctionalState NewState)
{
  u8 itmask = 0;

  /* Check the parameters */
  assert_param(IS_ADC_ALL_PERIPH(ADCx));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  assert_param(IS_ADC_IT(ADC_IT));

  /* Get the ADC IT index */
  itmask = (u8)ADC_IT;

  if (NewState != DISABLE)
  {
    /* Enable the selected ADC interrupts */
    ADCx->CR1 |= itmask;
  }
  else
  {
    /* Disable the selected ADC interrupts */
    ADCx->CR1 &= (~(u32)itmask);
  }
}

/*******************************************************************************