/* Get ADCCLK prescaler */
  tmp = RCC->CFGR & CFGR_ADCPRE_Set_Mask;
  tmp = tmp >> 14;
  presc = ADCPrescTable[tmp];

  /* ADCCLK clock frequency */
  RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK2_Frequency / presc;
}

/*******************************************************************************
* Function Name  : RCC_AHBPeriphClockCmd
* Description    : Enables or disables the AHB peripheral clock.
* Input          : - RCC_AHBPeriph: specifies the AHB peripheral to gates its clock.
*                    This parameter can be any combination of the following values:
*                       - RCC_AHBPeriph_DMA1
*                       - RCC_AHBPeriph_DMA2
*                       - RCC_AHBPeriph_SRAM
*                       - RCC_AHBPeriph_FLITF
*                       - RCC_AHBPeriph_CRC
*                       - RCC_AHBPeriph_FSMC
*                       - RCC_AHBPeriph_SDIO
*                    SRAM and FLITF clock can be disabled only during sleep mode.
*                  - NewState: new state of the specified peripheral clock.
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void RCC_AHBPeriphClockCmd(u32 RCC_AHBPeriph, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_RCC_AHB_PERIPH(RCC_AHBPeriph));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    RCC->AHBENR |= RCC_AHBPeriph;
  }
  else
  {
    RCC->AHBENR &= ~RCC_AHBPeriph;
  }
}

/*******************************************************************************
* Function Name  : RCC_APB2PeriphClockCmd
* Description    : Enables or disables the High Speed APB (APB2) peripheral clock.
* Input          : - RCC_APB2Periph: specifies the APB2 peripheral to gates its
*                    clock.
*                    This parameter can be any combination of the following values:
*                       - RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB,
*                         RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE,
*                         RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1,
*                         RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1,
*                         RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3,
*                         RCC_APB2Periph_ALL
*                  - NewState: new state of the specified peripheral clock.
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void RCC_APB2PeriphClockCmd(u32 RCC_APB2Periph, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    RCC->APB2ENR |= RCC_APB2Periph;
  }
  else
  {
    RCC->APB2ENR &= ~RCC_APB2Periph;
  }
}

/*******************************************************************************
* Function Name  : RCC_APB1PeriphClockCmd
* Description    : Enables or disables the Low Speed APB (APB1) peripheral clock.
* Input          : - RCC_APB1Periph: specifies the APB1 peripheral to gates its
*                    clock.
*                    This parameter can be any combination of the following values:
*                       - RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4,
*                         RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7,
*                         RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3,
*                         RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, 
*                         RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2,
*                         RCC_APB1Periph_USB, RCC_APB1Periph_CAN, RCC_APB1Periph_BKP,
*                         RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_ALL
*                  - NewState: new state of the specified peripheral clock.
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void RCC_APB1PeriphClockCmd(u32 RCC_APB1Periph, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    RCC->APB1ENR |= RCC_APB1Periph;
  }
  else
  {
    RCC->APB1ENR &= ~RCC_APB1Periph;
  }
}

/*******************************************************************************
* Function Name  : RCC_APB2PeriphResetCmd
* Description    : Forces or releases High Speed APB (APB2) peripheral reset.
* Input          : - RCC_APB2Periph: specifies the APB2 peripheral to reset.
*                    This parameter can be any combination of the following values:
*                       - RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB,
*                         RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE,
*                         RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1,
*                         RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1,
*                         RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3,
*                         RCC_APB2Periph_ALL
*                  - NewState: new state of the specified peripheral reset.
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void RCC_APB2PeriphResetCmd(u32 RCC_APB2Periph, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    RCC->APB2RSTR |= RCC_APB2Periph;
  }
  else
  {
    RCC->APB2RSTR &= ~RCC_APB2Periph;
  }
}

/*******************************************************************************
* Function Name  : RCC_APB1PeriphResetCmd
* Description    : Forces or releases Low Speed APB (APB1) peripheral reset.
* Input          : - RCC_APB1Periph: specifies the APB1 peripheral to reset.
*                    This parameter can be any combination of the following values:
*                       - RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4,
*                         RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7,
*                         RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3,
*                         RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, 
*                         RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2,
*                         RCC_APB1Periph_USB, RCC_APB1Periph_CAN, RCC_APB1Periph_BKP,
*                         RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_ALL
*                  - NewState: new state of the specified peripheral clock.
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void RCC_APB1PeriphResetCmd(u32 RCC_APB1Periph, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    RCC->APB1RSTR |= RCC_APB1Periph;
  }
  else
  {
    RCC->APB1RSTR &= ~RCC_APB1Periph;
  }
}

/*******************************************************************************
* Function Name  : RCC_BackupResetCmd
* Description    : Forces or releases the Backup domain reset.
* Input          : - NewState: new state of the Backup domain reset.
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void RCC_BackupResetCmd(FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  *(vu32 *) BDCR_BDRST_BB = (u32)NewState;
}

/*******************************************************************************
* Function Name  : RCC_ClockSecuritySystemCmd
* Description    : Enables or disables the Clock Security System.
* Input          : - NewState: new state of the Clock Security System..
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void RCC_ClockSecuritySystemCmd(FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  *(vu32 *) CR_CSSON_BB = (u32)NewState;
}

/*******************************************************************************
* Function Name  : RCC_MCOConfig
* Description    : Selects the clock source to output on MCO pin.
* Input          : - RCC_MCO: specifies the clock source to output.
*                    This parameter can be one of the following values:
*                       - RCC_MCO_NoClock: No clock selected
*                       - RCC_MCO_SYSCLK: System clock selected
*                       - RCC_MCO_HSI: HSI oscillator clock selected
*                       - RCC_MCO_HSE: HSE oscillator clock selected
*                       - RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected
* Output         : None
* Return         : None
*******************************************************************************/
void RCC_MCOConfig(u8 RCC_MCO)
{
  /* Check the parameters */
  assert_param(IS_RCC_MCO(RCC_MCO));

  /* Perform Byte access to MCO[2:0] bits to select the MCO source */
  *(vu8 *) CFGR_BYTE4_ADDRESS = RCC_MCO;
}

/*******************************************************************************
* Function Name  : RCC_GetFlagStatus
* Description    : Checks whether the specified RCC flag is set or not.
* Input          : - RCC_FLAG: specifies the flag to check.
*                    This parameter can be one of the following values:
*                       - RCC_FLAG_HSIRDY: HSI oscillator clock ready
*                       - RCC_FLAG_HSERDY: HSE oscillator clock ready
*                       - RCC_FLAG_PLLRDY: PLL clock ready
*                       - RCC_FLAG_LSERDY: LSE oscillator clock ready
*                       - RCC_FLAG_LSIRDY: LSI oscillator clock ready
*                       - RCC_FLAG_PINRST: Pin reset
*                       - RCC_FLAG_PORRST: POR/PDR reset
*                       - RCC_FLAG_SFTRST: Software reset
*                       - RCC_FLAG_IWDGRST: Independent Watchdog reset
*                       - RCC_FLAG_WWDGRST: Window Watchdog reset
*                       - RCC_FLAG_LPWRRST: Low Power reset
* Output         : None
* Return         : The new state of RCC_FLAG (SET or RESET).
*******************************************************************************/
FlagStatus RCC_GetFlagStatus(u8 RCC_FLAG)
{
  u32 tmp = 0;
  u32 statusreg = 0;
  FlagStatus bitstatus = RESET;

  /* Check the parameters */
  assert_param(IS_RCC_FLAG(RCC_FLAG));

  /* Get the RCC register index */
  tmp = RCC_FLAG >> 5;

  if (tmp == 1)               /* The flag to check is in CR register */
  {
    statusreg = RCC->CR;
  }
  else if (tmp == 2)          /* The flag to check is in BDCR register */
  {
    statusreg = RCC->BDCR;
  }
  else                       /* The flag to check is in CSR register */
  {
    statusreg = RCC->CSR;
  }

  /* Get the flag position */
  tmp = RCC_FLAG & FLAG_Mask;

  if ((statusreg & ((u32)1 << tmp)) != (u32)RESET)
  {
    bitstatus = SET;
  }
  else
  {
    bitstatus = RESET;
  }

  /* Return the flag status */
  return bitstatus;
}

/*******************************************************************************
* Function Name  : RCC_ClearFlag
* Description    : Clears the RCC reset flags.
*                  The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST,
*                  RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST,
*                  RCC_FLAG_LPWRRST
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void RCC_ClearFlag(void)
{
  /* Set RMVF bit to clear the reset flags */
  RCC->CSR |= CSR_RMVF_Set;
}

/*******************************************************************************
* Function Name  : RCC_GetITStatus
* Description    : Checks whether the specified RCC interrupt has occurred or not.
* Input          : - RCC_IT: specifies the RCC interrupt source to check.
*                    This parameter can be one of the following values:
*                       - RCC_IT_LSIRDY: LSI ready interrupt
*                       - RCC_IT_LSERDY: LSE ready interrupt
*                       - RCC_IT_HSIRDY: HSI ready interrupt
*                       - RCC_IT_HSERDY: HSE ready interrupt
*                       - RCC_IT_PLLRDY: PLL ready interrupt
*                       - RCC_IT_CSS: Clock Security System interrupt
* Output         : None
* Return         : The new state of RCC_IT (SET or RESET).
*******************************************************************************/
ITStatus RCC_GetITStatus(u8 RCC_IT)
{
  ITStatus bitstatus = RESET;

  /* Check the parameters */
  assert_param(IS_RCC_GET_IT(RCC_IT));

  /* Check the status of the specified RCC interrupt */
  if ((RCC->CIR & RCC_IT) != (u32)RESET)
  {
    bitstatus = SET;
  }
  else
  {
    bitstatus = RESET;
  }

  /* Return the RCC_IT status */
  return  bitstatus;
}

/*******************************************************************************
* Function Name  : RCC_ClearITPendingBit
* Description    : Clears the RCC抯 interrupt pending bits.
* Input          : - RCC_IT: specifies the interrupt pending bit to clear.
*                    This parameter can be any combination of the following values:
*                       - RCC_IT_LSIRDY: LSI ready interrupt
*                       - RCC_IT_LSERDY: LSE ready interrupt
*                       - RCC_IT_HSIRDY: HSI ready interrupt
*                       - RCC_IT_HSERDY: HSE ready interrupt
*                       - RCC_IT_PLLRDY: PLL ready interrupt
*                       - RCC_IT_CSS: Clock Security System interrupt
* Output         : None
* Return         : None
*******************************************************************************/
void RCC_ClearITPendingBit(u8 RCC_IT)
{
  /* Check the parameters */
  assert_param(IS_RCC_CLEAR_IT(RCC_IT));

  /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt
     pending bits */
  *(vu8 *) CIR_BYTE3_ADDRESS = RCC_IT;
}

/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/