/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
* File Name          : stm32f10x_usart.c
* Author             : MCD Application Team
* Version            : V2.0.2
* Date               : 07/11/2008
* Description        : This file provides all the USART firmware functions.
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_usart.h"
#include "stm32f10x_rcc.h"

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* USART UE Mask */
#define CR1_UE_Set                ((u16)0x2000)  /* USART Enable Mask */
#define CR1_UE_Reset              ((u16)0xDFFF)  /* USART Disable Mask */

/* USART WakeUp Method  */
#define CR1_WAKE_Mask             ((u16)0xF7FF)  /* USART WakeUp Method Mask */

/* USART RWU Mask */
#define CR1_RWU_Set               ((u16)0x0002)  /* USART mute mode Enable Mask */
#define CR1_RWU_Reset             ((u16)0xFFFD)  /* USART mute mode Enable Mask */

#define CR1_SBK_Set               ((u16)0x0001)  /* USART Break Character send Mask */

#define CR1_CLEAR_Mask            ((u16)0xE9F3)  /* USART CR1 Mask */

#define CR2_Address_Mask          ((u16)0xFFF0)  /* USART address Mask */

/* USART LIN Mask */
#define CR2_LINEN_Set              ((u16)0x4000)  /* USART LIN Enable Mask */
#define CR2_LINEN_Reset            ((u16)0xBFFF)  /* USART LIN Disable Mask */

/* USART LIN Break detection */
#define CR2_LBDL_Mask             ((u16)0xFFDF)  /* USART LIN Break detection Mask */

#define CR2_STOP_CLEAR_Mask       ((u16)0xCFFF)  /* USART CR2 STOP Bits Mask */
#define CR2_CLOCK_CLEAR_Mask      ((u16)0xF0FF)  /* USART CR2 Clock Mask */

/* USART SC Mask */
#define CR3_SCEN_Set              ((u16)0x0020)  /* USART SC Enable Mask */
#define CR3_SCEN_Reset            ((u16)0xFFDF)  /* USART SC Disable Mask */

/* USART SC NACK Mask */
#define CR3_NACK_Set              ((u16)0x0010)  /* USART SC NACK Enable Mask */
#define CR3_NACK_Reset            ((u16)0xFFEF)  /* USART SC NACK Disable Mask */

/* USART Half-Duplex Mask */
#define CR3_HDSEL_Set             ((u16)0x0008)  /* USART Half-Duplex Enable Mask */
#define CR3_HDSEL_Reset           ((u16)0xFFF7)  /* USART Half-Duplex Disable Mask */

/* USART IrDA Mask */
#define CR3_IRLP_Mask             ((u16)0xFFFB)  /* USART IrDA LowPower mode Mask */

#define CR3_CLEAR_Mask            ((u16)0xFCFF)  /* USART CR3 Mask */

/* USART IrDA Mask */
#define CR3_IREN_Set              ((u16)0x0002)  /* USART IrDA Enable Mask */
#define CR3_IREN_Reset            ((u16)0xFFFD)  /* USART IrDA Disable Mask */

#define GTPR_LSB_Mask             ((u16)0x00FF)  /* Guard Time Register LSB Mask */
#define GTPR_MSB_Mask             ((u16)0xFF00)  /* Guard Time Register MSB Mask */

#define IT_Mask                   ((u16)0x001F)  /* USART Interrupt Mask */

/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/

/*******************************************************************************
* Function Name  : USART_DeInit
* Description    : Deinitializes the USARTx peripheral registers to their
*                  default reset values.
* Input          : - USARTx: Select the USART or the UART peripheral. 
*                    This parameter can be one of the following values:
*                     - USART1, USART2, USART3, UART4 or UART5.
* Output         : None
* Return         : None
*******************************************************************************/
void USART_DeInit(USART_TypeDef* USARTx)
{
  /* Check the parameters */
  assert_param(IS_USART_ALL_PERIPH(USARTx));

  switch (*(u32*)&USARTx)
  {
    case USART1_BASE:
      RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE);
      RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE);
      break;

    case USART2_BASE:
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE);
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE);
      break;

    case USART3_BASE:
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE);
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE);
      break;
    
    case UART4_BASE:
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE);
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE);
      break;
    
    case UART5_BASE:
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE);
      RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE);
      break;            

    default:
      break;
  }
}

/*******************************************************************************
* Function Name  : USART_Init
* Description    : Initializes the USARTx peripheral according to the specified
*                  parameters in the USART_InitStruct .
* Input          : - USARTx: Select the USART or the UART peripheral. 
*                    This parameter can be one of the following values:
*                     - USART1, USART2, USART3, UART4 or UART5.
*                  - USART_InitStruct: pointer to a USART_InitTypeDef structure
*                    that contains the configuration information for the
*                    specified USART peripheral.
* Output         : None
* Return         : None
*******************************************************************************/
void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct)
{
  u32 tmpreg = 0x00, apbclock = 0x00;
  u32 integerdivider = 0x00;
  u32 fractionaldivider = 0x00;
  u32 usartxbase = 0;
  RCC_ClocksTypeDef RCC_ClocksStatus;

  /* Check the parameters */
  assert_param(IS_USART_ALL_PERIPH(USARTx));
  assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate));  
  assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength));
  assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits));
  assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity));
  assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode));
  assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl));
  /* The hardware flow control is available only for USART1, USART2 and USART3 */          
  assert_param(IS_USART_PERIPH_HFC(USARTx, USART_InitStruct->USART_HardwareFlowControl));
  
  usartxbase = (*(u32*)&USARTx);

/*---------------------------- USART CR2 Configuration -----------------------*/
  tmpreg = USARTx->CR2;
  /* Clear STOP[13:12] bits */
  tmpreg &= CR2_STOP_CLEAR_Mask;

  /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/
  /* Set STOP[13:12] bits according to USART_StopBits value */
  tmpreg |= (u32)USART_InitStruct->USART_StopBits;
  
  /* Write to USART CR2 */
  USARTx->CR2 = (u16)tmpreg;

/*---------------------------- USART CR1 Configuration -----------------------*/
  tmpreg = USARTx->CR1;
  /* Clear M, PCE, PS, TE and RE bits */
  tmpreg &= CR1_CLEAR_Mask;

  /* Configure the USART Word Length, Parity and mode ----------------------- */
  /* Set the M bits according to USART_WordLength value */
  /* Set PCE and PS bits according to USART_Parity value */
  /* Set TE and RE bits according to USART_Mode value */
  tmpreg |= (u32)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity |
            USART_InitStruct->USART_Mode;

  /* Write to USART CR1 */
  USARTx->CR1 = (u16)tmpreg;

/*---------------------------- USART CR3 Configuration -----------------------*/  
  tmpreg = USARTx->CR3;
  /* Clear CTSE and RTSE bits */
  tmpreg &= CR3_CLEAR_Mask;

  /* Configure the USART HFC -------------------------------------------------*/
  /* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */
  tmpreg |= USART_InitStruct->USART_HardwareFlowControl;

  /* Write to USART CR3 */
  USARTx->CR3 = (u16)tmpreg;

/*---------------------------- USART BRR Configuration -----------------------*/
  /* Configure the USART Baud Rate -------------------------------------------*/
  RCC_GetClocksFreq(&RCC_ClocksStatus);
  if (usartxbase == USART1_BASE)
  {
    apbclock = RCC_ClocksStatus.PCLK2_Frequency;
  }
  else
  {
    apbclock = RCC_ClocksStatus.PCLK1_Frequency;
  }

  /* Determine the integer part */
  integerdivider = ((0x19 * apbclock) / (0x04 * (USART_InitStruct->USART_BaudRate)));
  tmpreg = (integerdivider / 0x64) << 0x04;

  /* Determine the fractional part */
  fractionaldivider = integerdivider - (0x64 * (tmpreg >> 0x04));
  tmpreg |= ((((fractionaldivider * 0x10) + 0x32) / 0x64)) & ((u8)0x0F);

  /* Write to USART BRR */
  USARTx->BRR = (u16)tmpreg;
}

/*******************************************************************************
* Function Name  : USART_StructInit
* Description    : Fills each USART_InitStruct member with its default value.
* Input          : - USART_InitStruct: pointer to a USART_InitTypeDef structure
*                    which will be initialized.
* Output         : None
* Return         : None
*******************************************************************************/
void USART_StructInit(USART_InitTypeDef* USART_InitStruct)
{
  /* USART_InitStruct members default value */
  USART_InitStruct->USART_BaudRate = 9600;
  USART_InitStruct->USART_WordLength = USART_WordLength_8b;
  USART_InitStruct->USART_StopBits = USART_StopBits_1;
  USART_InitStruct->USART_Parity = USART_Parity_No ;
  USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
  USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None;  
}

/*******************************************************************************
* Function Name  : USART_ClockInit
* Description    : Initializes the USARTx peripheral Clock according to the 
*                  specified parameters in the USART_ClockInitStruct .
* Input          : - USARTx: where x can be 1, 2, 3 to select the USART peripheral.
*                    Note: The Smart Card mode is not available for UART4 and UART5.
*                  - USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef
*                    structure that contains the configuration information for 
*                    the specified USART peripheral.
* Output         : None
* Return         : None
*******************************************************************************/
void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct)
{
  u32 tmpreg = 0x00;

  /* Check the parameters */
  assert_param(IS_USART_123_PERIPH(USARTx));
  assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock));
  assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL));
  assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA));
  assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit));              
  
/*---------------------------- USART CR2 Configuration -----------------------*/
  tmpreg = USARTx->CR2;
  /* Clear CLKEN, CPOL, CPHA and LBCL bits */
  tmpreg &= CR2_CLOCK_CLEAR_Mask;

  /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/
  /* Set CLKEN bit according to USART_Clock value */
  /* Set CPOL bit according to USART_CPOL value */
  /* Set CPHA bit according to USART_CPHA value */
  /* Set LBCL bit according to USART_LastBit value */
  tmpreg |= (u32)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL | 
                 USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit;

  /* Write to USART CR2 */
  USARTx->CR2 = (u16)tmpreg;
}

/*******************************************************************************
* Function Name  : USART_ClockStructInit
* Description    : Fills each USART_ClockInitStruct member with its default value.
* Input          : - USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef
*                    structure which will be initialized.
* Output         : None
* Return         : None
*******************************************************************************/
void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct)
{
  /* USART_ClockInitStruct members default value */
  USART_ClockInitStruct->USART_Clock = USART_Clock_Disable;
  USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low;
  USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge;
  USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable;
}

/*******************************************************************************
* Function Name  : USART_Cmd
* Description    : Enables or disables the specified USART peripheral.
* Input          : - USARTx: Select the USART or the UART peripheral. 
*                    This parameter can be one of the following values:
*                     - USART1, USART2, USART3, UART4 or UART5.
*                : - NewState: new state of the USARTx peripheral.
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_USART_ALL_PERIPH(USARTx));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  
  if (NewState != DISABLE)
  {
    /* Enable the selected USART by setting the UE bit in the CR1 register */
    USARTx->CR1 |= CR1_UE_Set;
  }
  else
  {
    /* Disable the selected USART by clearing the UE bit in the CR1 register */
    USARTx->CR1 &= CR1_UE_Reset;
  }
}

/*******************************************************************************
* Function Name  : USART_ITConfig
* Description    : Enables or disables the specified USART interrupts.
* Input          : - USARTx: Select the USART or the UART peripheral. 
*                    This parameter can be one of the following values:
*                     - USART1, USART2, USART3, UART4 or UART5.