0x00,0x00,0x10,0x10,0x7C,0x10,0x10,0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x00,

/*--  文字:  +  --49*/
/*--  宋體12;  此字體下對應的點陣為：寬x高=8x16   --*/
0x00,0x00,0x10,0x10,0x7C,0x10,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  -  --50*/
/*--  宋體12;  此字體下對應的點陣為：寬x高=8x16   --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x00
};

const unsigned char hanzi[]=
{
/*--  文字:  寧  --*/
/*--  Trebuchet MS12;  此字體下對應的點陣為：寬x高=16x16   --*/
0x00,0x90,0x8C,0x84,0x84,0x84,0x85,0x86,0x84,0x84,0x84,0x84,0x94,0x8E,0x04,0x00,
0x00,0x00,0x00,0x00,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  波  --*/
/*--  Trebuchet MS12;  此字體下對應的點陣為：寬x高=16x16   --*/
0x10,0x60,0x01,0xE6,0x00,0xF8,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x18,0x08,0x00,
0x04,0x04,0xFF,0x40,0x30,0x8F,0x80,0x41,0x26,0x18,0x18,0x26,0x61,0xC0,0x40,0x00,

/*--  文字:  單  --*/
/*--  Trebuchet MS12;  此字體下對應的點陣為：寬x高=16x16   --*/
0x00,0x00,0xF8,0x28,0x29,0x2E,0x2A,0xF8,0x28,0x2C,0x2B,0x2A,0xF8,0x00,0x00,0x00,
0x08,0x08,0x0B,0x09,0x09,0x09,0x09,0xFF,0x09,0x09,0x09,0x09,0x0B,0x08,0x08,0x00,

/*--  文字:  片  --*/
/*--  Trebuchet MS12;  此字體下對應的點陣為：寬x高=16x16   --*/
0x00,0x00,0x00,0xFE,0x10,0x10,0x10,0x10,0x10,0x1F,0x10,0x10,0x10,0x18,0x10,0x00,
0x80,0x40,0x30,0x0F,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0xFF,0x00,0x00,0x00,0x00,

/*--  文字:  機  --*/
/*--  Trebuchet MS12;  此字體下對應的點陣為：寬x高=16x16   --*/
0x08,0x08,0xC8,0xFF,0x48,0x88,0x08,0x00,0xFE,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,
0x04,0x03,0x00,0xFF,0x00,0x41,0x30,0x0C,0x03,0x00,0x00,0x00,0x3F,0x40,0x78,0x00,

/*--  文字:  開  --*/
/*--  Trebuchet MS12;  此字體下對應的點陣為：寬x高=16x16   --*/
0x40,0x42,0x42,0x42,0x42,0xFE,0x42,0x42,0x42,0x42,0xFE,0x42,0x42,0x42,0x42,0x00,
0x00,0x40,0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x00,0x7F,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  發  --*/
/*--  Trebuchet MS12;  此字體下對應的點陣為：寬x高=16x16   --*/
0x00,0x10,0x3E,0x10,0x10,0xF0,0x9F,0x90,0x90,0x92,0x94,0x1C,0x10,0x10,0x10,0x00,
0x40,0x20,0x10,0x88,0x87,0x41,0x46,0x28,0x10,0x28,0x27,0x40,0xC0,0x40,0x00,0x00,

/*--  文字:  網  --*/
/*--  Trebuchet MS12;  此字體下對應的點陣為：寬x高=16x16   --*/
0x00,0xFE,0x02,0x12,0x22,0xC2,0x22,0x1A,0x22,0x42,0x82,0x72,0x22,0xFE,0x00,0x00,
0x00,0x7F,0x08,0x04,0x03,0x00,0x03,0x0C,0x04,0x02,0x01,0x26,0x60,0x3F,0x00,0x00,
};

void delay_1ms(void)//1ms延時函數
{
	unsigned int i;
	for (i=0;i<500;i++)
		asm("CLRWDT");
}
void init(void)
{
  	asm("CLRWDT");  
  	ADCON1=0X06;
  	OPTION=0x81;
  	TRISA=0B00000000;
  	TRISB=0B00111000;
  	TRISC=0B00000000;
  	TRISD=0B00000000;
  	TRISE=0B00000000;
  	PORTA=0;
  	PORTB=0x04;
  	PORTC=0;
  	PORTD=0;
  	PORTE=0;
  	RBIE=0;  	
}
/*--------------------------------------------
LCD_write_byte: 使用SPI接口寫數據到LCD
輸入參數：dt：寫入的數據；
command ：寫數據/命令選擇；
編寫日期：20080918 
----------------------------------------------*/
void LCD_write_byte(unsigned char dt, unsigned char command)
{
	unsigned char i; 
	sce=0;	
	dc=command;	
	for(i=0;i<8;i++)
	{ 
		if(dt&0x80)
			sdin=1;
		else
			sdin=0;
		dt=dt<<1;		
		sclk=0; 		
		sclk=1; 
	}	
	dc=1;	
	sce=1;	
	sdin=1;
}
/*---------------------------------------
LCD_init: 3310LCD初始化
編寫日期：20080918 
-----------------------------------------  */
void LCD_init(void)
{
	sce=1;
	res=1;
	delay_1ms();
	res=0;  	
  	delay_1ms();
  	res=1;  
	LCD_write_byte(0x21,0);//初始化Lcd,功能設定使用擴充指令
	LCD_write_byte(0xd9,0);//設定液晶偏置電壓(高--低）
	LCD_write_byte(0x20,0);//使用基本指令
	LCD_write_byte(0x0C,0);//設定顯示模式，正常顯示
}
/*-------------------------------------------
LCD_set_XY: 設置LCD坐標函數
輸入參數：X：0－83  Y：0－5
編寫日期：20080918 
---------------------------------------------*/
void LCD_set_XY(unsigned char X, unsigned char Y)
{
	LCD_write_byte(0x40 | Y, 0);// column
	LCD_write_byte(0x80 | X, 0);// row
} 
/*------------------------------------------
LCD_clear: LCD清屏函數
編寫日期：20080918 
--------------------------------------------*/
void LCD_clear(void)
{
	unsigned char t;
	unsigned char k;
	LCD_set_XY(0,0);
	for(t=0;t<6;t++)
	{ 
		for(k=0;k<84;k++)
		{ 
			LCD_write_byte(0x00,1);
			asm("CLRWDT");			
		} 
	}
}
/*---------------------------------------------
LCD_write_shu: 顯示8（寬）*16（高）點陣列數字字母符號等半角類
輸入參數：c：顯示的字符；
編寫日期：20080918 
-----------------------------------------------*/
void LCD_write_shu(unsigned char row, unsigned char page,unsigned char c) //row:列 page:頁 dd:字符
{
	unsigned char i;  	
	asm("CLRWDT");
	LCD_set_XY(row*8, page);// 列，頁 
	for(i=0; i<8;i++) 
	{
		LCD_write_byte(shuzi[c*16+i],1); 
	}
	asm("CLRWDT");
    LCD_set_XY(row*8, page+1);// 列，頁 
	for(i=8; i<16;i++) 
	{
		LCD_write_byte(shuzi[c*16+i],1);
	}	 	
}
/*---------------------------------------------
LCD_write_hanzi: 顯示16（寬）*16（高）點陣列漢字等半角類
輸入參數：c：顯示的字符；
編寫日期：20080918 
-----------------------------------------------*/
void LCD_write_hanzi(unsigned char row, unsigned char page,unsigned char c) //row:列 page:頁 dd:字符
{
	unsigned char i;  	
	asm("CLRWDT");
	LCD_set_XY(row*8, page);// 列，頁 
	for(i=0; i<16;i++) 
	{
		LCD_write_byte(hanzi[c*32+i],1); 
	}
	asm("CLRWDT");
    LCD_set_XY(row*8, page+1);// 列，頁 
	for(i=16; i<32;i++) 
	{
		LCD_write_byte(hanzi[c*32+i],1);
	}	
}
main()
{	
  	init();    	  	
  	LCD_init();  //初始化LCD模塊 
	LCD_clear(); //清屏幕	
	LCD_write_hanzi(0,0,0);  //寧	
	LCD_write_hanzi(2,0,1);  //波
	LCD_write_hanzi(4,0,2);  //單
	LCD_write_hanzi(6,0,3);  //片
	LCD_write_hanzi(8,0,4);  //機
	
	LCD_write_hanzi(1,2,5);  //開
	LCD_write_hanzi(4,2,6);  //發
	LCD_write_hanzi(7,2,7);  //網
				
	LCD_write_shu(1,4,23);   //n
	LCD_write_shu(2,4,11); 	 //b
	LCD_write_shu(3,4,13); 	 //d
	LCD_write_shu(4,4,25); 	 //p
	LCD_write_shu(5,4,19); 	 //j
	LCD_write_shu(6,4,45); 	 //.
	LCD_write_shu(7,4,12); 	 //c
	LCD_write_shu(8,4,24); 	 //o
	LCD_write_shu(9,4,22); 	 //m	
	
  	while(1)
  	{
    	asm("CLRWDT");  
  	}
}