/**
  ******************************************************************************
  * @file    stm32f10x_dma.c
  * @author  MCD Application Team
  * @version V3.1.2
  * @date    09/28/2009
  * @brief   This file provides all the DMA firmware functions.
  ******************************************************************************
  * @copy
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
  */ 

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_dma.h"
#include "stm32f10x_rcc.h"

/** @addtogroup STM32F10x_StdPeriph_Driver
  * @{
  */

/** @defgroup DMA 
  * @brief DMA driver modules
  * @{
  */ 

/** @defgroup DMA_Private_TypesDefinitions
  * @{
  */ 
/**
  * @}
  */

/** @defgroup DMA_Private_Defines
  * @{
  */

/* DMA ENABLE mask */
#define CCR_ENABLE_Set          ((uint32_t)0x00000001)
#define CCR_ENABLE_Reset        ((uint32_t)0xFFFFFFFE)

/* DMA1 Channelx interrupt pending bit masks */
#define DMA1_Channel1_IT_Mask    ((uint32_t)0x0000000F)
#define DMA1_Channel2_IT_Mask    ((uint32_t)0x000000F0)
#define DMA1_Channel3_IT_Mask    ((uint32_t)0x00000F00)
#define DMA1_Channel4_IT_Mask    ((uint32_t)0x0000F000)
#define DMA1_Channel5_IT_Mask    ((uint32_t)0x000F0000)
#define DMA1_Channel6_IT_Mask    ((uint32_t)0x00F00000)
#define DMA1_Channel7_IT_Mask    ((uint32_t)0x0F000000)

/* DMA2 Channelx interrupt pending bit masks */
#define DMA2_Channel1_IT_Mask    ((uint32_t)0x0000000F)
#define DMA2_Channel2_IT_Mask    ((uint32_t)0x000000F0)
#define DMA2_Channel3_IT_Mask    ((uint32_t)0x00000F00)
#define DMA2_Channel4_IT_Mask    ((uint32_t)0x0000F000)
#define DMA2_Channel5_IT_Mask    ((uint32_t)0x000F0000)

/* DMA2 FLAG mask */
#define FLAG_Mask                ((uint32_t)0x10000000)

/* DMA registers Masks */
#define CCR_CLEAR_Mask           ((uint32_t)0xFFFF800F)

/**
  * @}
  */

/** @defgroup DMA_Private_Macros
  * @{
  */

/**
  * @}
  */

/** @defgroup DMA_Private_Variables
  * @{
  */

/**
  * @}
  */

/** @defgroup DMA_Private_FunctionPrototypes
  * @{
  */

/**
  * @}
  */

/** @defgroup DMA_Private_Functions
  * @{
  */

/**
  * @brief  Deinitializes the DMAy Channelx registers to their default reset
  *   values.
  * @param  DMAy_Channelx: where y can be 1 or 2 to select the DMA and
  *   x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
  * @retval None
  */
void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx)
{
  /* Check the parameters */
  assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
  /* Disable the selected DMAy Channelx */
  DMAy_Channelx->CCR &= CCR_ENABLE_Reset;
  /* Reset DMAy Channelx control register */
  DMAy_Channelx->CCR  = 0;
  
  /* Reset DMAy Channelx remaining bytes register */
  DMAy_Channelx->CNDTR = 0;
  
  /* Reset DMAy Channelx peripheral address register */
  DMAy_Channelx->CPAR  = 0;
  
  /* Reset DMAy Channelx memory address register */
  DMAy_Channelx->CMAR = 0;
  
  if (DMAy_Channelx == DMA1_Channel1)
  {
    /* Reset interrupt pending bits for DMA1 Channel1 */
    DMA1->IFCR |= DMA1_Channel1_IT_Mask;
  }
  else if (DMAy_Channelx == DMA1_Channel2)
  {
    /* Reset interrupt pending bits for DMA1 Channel2 */
    DMA1->IFCR |= DMA1_Channel2_IT_Mask;
  }
  else if (DMAy_Channelx == DMA1_Channel3)
  {
    /* Reset interrupt pending bits for DMA1 Channel3 */
    DMA1->IFCR |= DMA1_Channel3_IT_Mask;
  }
  else if (DMAy_Channelx == DMA1_Channel4)
  {
    /* Reset interrupt pending bits for DMA1 Channel4 */
    DMA1->IFCR |= DMA1_Channel4_IT_Mask;
  }
  else if (DMAy_Channelx == DMA1_Channel5)
  {
    /* Reset interrupt pending bits for DMA1 Channel5 */
    DMA1->IFCR |= DMA1_Channel5_IT_Mask;
  }
  else if (DMAy_Channelx == DMA1_Channel6)
  {
    /* Reset interrupt pending bits for DMA1 Channel6 */
    DMA1->IFCR |= DMA1_Channel6_IT_Mask;
  }
  else if (DMAy_Channelx == DMA1_Channel7)
  {
    /* Reset interrupt pending bits for DMA1 Channel7 */
    DMA1->IFCR |= DMA1_Channel7_IT_Mask;
  }
  else if (DMAy_Channelx == DMA2_Channel1)
  {
    /* Reset interrupt pending bits for DMA2 Channel1 */
    DMA2->IFCR |= DMA2_Channel1_IT_Mask;
  }
  else if (DMAy_Channelx == DMA2_Channel2)
  {
    /* Reset interrupt pending bits for DMA2 Channel2 */
    DMA2->IFCR |= DMA2_Channel2_IT_Mask;
  }
  else if (DMAy_Channelx == DMA2_Channel3)
  {
    /* Reset interrupt pending bits for DMA2 Channel3 */
    DMA2->IFCR |= DMA2_Channel3_IT_Mask;
  }
  else if (DMAy_Channelx == DMA2_Channel4)
  {
    /* Reset interrupt pending bits for DMA2 Channel4 */
    DMA2->IFCR |= DMA2_Channel4_IT_Mask;
  }
  else
  { 
    if (DMAy_Channelx == DMA2_Channel5)
    {
      /* Reset interrupt pending bits for DMA2 Channel5 */
      DMA2->IFCR |= DMA2_Channel5_IT_Mask;
    }
  }
}

/**
  * @brief  Initializes the DMAy Channelx according to the specified
  *   parameters in the DMA_InitStruct.
  * @param  DMAy_Channelx: where y can be 1 or 2 to select the DMA and 
  *   x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
  * @param  DMA_InitStruct: pointer to a DMA_InitTypeDef structure that
  *   contains the configuration information for the specified DMA Channel.
  * @retval None
  */
void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct)
{
  uint32_t tmpreg = 0;

  /* Check the parameters */
  assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
  assert_param(IS_DMA_DIR(DMA_InitStruct->DMA_DIR));
  assert_param(IS_DMA_BUFFER_SIZE(DMA_InitStruct->DMA_BufferSize));
  assert_param(IS_DMA_PERIPHERAL_INC_STATE(DMA_InitStruct->DMA_PeripheralInc));
  assert_param(IS_DMA_MEMORY_INC_STATE(DMA_InitStruct->DMA_MemoryInc));   
  assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(DMA_InitStruct->DMA_PeripheralDataSize));
  assert_param(IS_DMA_MEMORY_DATA_SIZE(DMA_InitStruct->DMA_MemoryDataSize));
  assert_param(IS_DMA_MODE(DMA_InitStruct->DMA_Mode));
  assert_param(IS_DMA_PRIORITY(DMA_InitStruct->DMA_Priority));
  assert_param(IS_DMA_M2M_STATE(DMA_InitStruct->DMA_M2M));

/*--------------------------- DMAy Channelx CCR Configuration -----------------*/
  /* Get the DMAy_Channelx CCR value */
  tmpreg = DMAy_Channelx->CCR;
  /* Clear MEM2MEM, PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */
  tmpreg &= CCR_CLEAR_Mask;
  /* Configure DMAy Channelx: data transfer, data size, priority level and mode */
  /* Set DIR bit according to DMA_DIR value */
  /* Set CIRC bit according to DMA_Mode value */
  /* Set PINC bit according to DMA_PeripheralInc value */
  /* Set MINC bit according to DMA_MemoryInc value */
  /* Set PSIZE bits according to DMA_PeripheralDataSize value */
  /* Set MSIZE bits according to DMA_MemoryDataSize value */
  /* Set PL bits according to DMA_Priority value */
  /* Set the MEM2MEM bit according to DMA_M2M value */
  tmpreg |= DMA_InitStruct->DMA_DIR | DMA_InitStruct->DMA_Mode |
            DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc |
            DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize |
            DMA_InitStruct->DMA_Priority | DMA_InitStruct->DMA_M2M;

  /* Write to DMAy Channelx CCR */
  DMAy_Channelx->CCR = tmpreg;

/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/
  /* Write to DMAy Channelx CNDTR */
  DMAy_Channelx->CNDTR = DMA_InitStruct->DMA_BufferSize;

/*--------------------------- DMAy Channelx CPAR Configuration ----------------*/
  /* Write to DMAy Channelx CPAR */
  DMAy_Channelx->CPAR = DMA_InitStruct->DMA_PeripheralBaseAddr;

/*--------------------------- DMAy Channelx CMAR Configuration ----------------*/
  /* Write to DMAy Channelx CMAR */
  DMAy_Channelx->CMAR = DMA_InitStruct->DMA_MemoryBaseAddr;
}

/**
  * @brief  Fills each DMA_InitStruct member with its default value.
  * @param  DMA_InitStruct : pointer to a DMA_InitTypeDef structure which will
  *   be initialized.
  * @retval None
  */
void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct)
{
/*-------------- Reset DMA init structure parameters values ------------------*/
  /* Initialize the DMA_PeripheralBaseAddr member */
  DMA_InitStruct->DMA_PeripheralBaseAddr = 0;
  /* Initialize the DMA_MemoryBaseAddr member */
  DMA_InitStruct->DMA_MemoryBaseAddr = 0;
  /* Initialize the DMA_DIR member */
  DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralSRC;
  /* Initialize the DMA_BufferSize member */
  DMA_InitStruct->DMA_BufferSize = 0;
  /* Initialize the DMA_PeripheralInc member */
  DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable;
  /* Initialize the DMA_MemoryInc member */
  DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable;
  /* Initialize the DMA_PeripheralDataSize member */
  DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
  /* Initialize the DMA_MemoryDataSize member */
  DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
  /* Initialize the DMA_Mode member */
  DMA_InitStruct->DMA_Mode = DMA_Mode_Normal;
  /* Initialize the DMA_Priority member */
  DMA_InitStruct->DMA_Priority = DMA_Priority_Low;
  /* Initialize the DMA_M2M member */
  DMA_InitStruct->DMA_M2M = DMA_M2M_Disable;
}

/**
  * @brief  Enables or disables the specified DMAy Channelx.
  * @param  DMAy_Channelx: where y can be 1 or 2 to select the DMA and 
  *   x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
  * @param  NewState: new state of the DMAy Channelx. 
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    /* Enable the selected DMAy Channelx */
    DMAy_Channelx->CCR |= CCR_ENABLE_Set;
  }
  else
  {
    /* Disable the selected DMAy Channelx */
    DMAy_Channelx->CCR &= CCR_ENABLE_Reset;
  }
}

/**
  * @brief  Enables or disables the specified DMAy Channelx interrupts.
  * @param  DMAy_Channelx: where y can be 1 or 2 to select the DMA and 
  *   x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
  * @param  DMA_IT: specifies the DMA interrupts sources to be enabled
  *   or disabled. 
  *   This parameter can be any combination of the following values:
  *     @arg DMA_IT_TC:  Transfer complete interrupt mask
  *     @arg DMA_IT_HT:  Half transfer interrupt mask
  *     @arg DMA_IT_TE:  Transfer error interrupt mask
  * @param  NewState: new state of the specified DMA interrupts.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
  assert_param(IS_DMA_CONFIG_IT(DMA_IT));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  if (NewState != DISABLE)
  {
    /* Enable the selected DMA interrupts */
    DMAy_Channelx->CCR |= DMA_IT;
  }
  else
  {
    /* Disable the selected DMA interrupts */
    DMAy_Channelx->CCR &= ~DMA_IT;
  }
}

/**
  * @brief  Returns the number of remaining data units in the current
  *   DMAy Channelx transfer.
  * @param  DMAy_Channelx: where y can be 1 or 2 to select the DMA and