This package implements the following Kalman filters:
1) Standard Kalman Filter
2) Extended Kalman Filter
3) Dual Kalman Filter
4) Square Root Kalman Filter
This package also contains instructive examples for each filter type demonstrating their practical application.
Texas instruments MIPI DSI to eDP converter. Input supports 2 channel, 4 lanes each, up to 1.5GBit/s. Total input bandwidth is 12Gbit/s. Output eDP 1.4 1,2 or 4 lanes up to 5.4Gbit/s. output up to 4096x2304 60fps.
CPCI_E標準規范 CompactPCI? Express SpecificationThe documents in this section may be useful for reference when reading the specification. The revision listed for each document is the latest revision at the time this specification was published. Newer revisions of these documents may exist, so refer to the newest revision. Many of these documents are referenced throughout this specification. Refer to the newest revision of the document unless a specific revision is referenced. ? PCI Express Base Specification 3.0. PCI Special Interest Group (PCI-SIG). ? PCI Express Card Electromechanical (CEM) Specification 3.0. PCI Special Interest Group (PCI-SIG). ? PCI Express to PCI/PCI-X Bridge Specification, Rev. 1.0. PCI Special Interest Group (PCI-SIG). ? PCI Express Jitter White Paper. PCI Special Interest Group (PCI-SIG). ? PCIe Rj Dj BER White Paper. PCI Special Interest Group (PCI-SIG). ? PHY Electrical Test Specification for PCI Express Architecture. PCI Special Interest Group (PCI SIG). ? System Management Bus (SMBus) Specification, Version 2.0. Smart Battery System Implementer’
設計了自動控制系統綜合實驗案例“基于LabVIEW和單片機的溫度控制系統設計”。實驗系統硬件部分由單片機、溫度傳感器、D/A轉換模塊、調壓模塊和電烤箱組成,設計了單片機與各個模塊之間的接口電路。軟件部分采用LabVIEW軟件實現控制算法,并設計監控界面實現參數設定、溫度數據實時監控等功能。設計了單片機與LabVIEW軟件之間的串口通信程序,實現了輸入、輸出數據的傳輸。通過綜合實驗系統設計,使學生得到控制系統設計和實驗調試等綜合能力的訓練。A comprehensive experimental case of the automatic control system is presented,which is the design of the temperature control system based on LabVIEW and SCM.The hardware part of the experimental system is composed of the SCM,temperature sensor,D/A conversion module,voltage regulating module and electric oven.The interface circuit between the SCM and each module is designed.In the software part,LabVIEW software is used to realize the control algorithm,and the monitoring interface is designed to realize the functions of parameter setting,temperature data real-time monitoring,etc.The serial communication program between the SCM and LabVIEW software is designed to realize the transmission of input and output data.Through the design of this comprehensive experimental system,students can get the comprehensive ability training for the control system design,experiment debugging,etc.
LED 線陣顯示裝置, 分為 LED 線性旋轉顯示主機和圖文錄入器兩部分。主機用直流電機帶動由紅綠 LED 組成的線陣旋轉, 同時線陣按照時序依次切換顯示狀態, 在固定區域利用視覺暫留效果形成 16×16 點陣, 用以顯示圖文;圖文錄入器用 HMI 觸控屏作為人機交互界面, 實現圖文錄入和回放功能。主機與圖文錄入器通過無線通信方式進行信息交互,可由圖文錄入器控制主機切換不同工作任務, 以及改變線陣顯示內容。The LED linear array display device is divided into two parts:the one is the main unit used to display content,and the other one is used to input the contents.The main unit is driven by a DC motor to rotate the linear array composed by red and green light emitting diodes.At the same time,the 16×16 dot matrix that switching the display state according to the time sequence on the main unit displays pictures and texts in the fixed area,by using the visual temporary effect.The HMI touch screen is used as human machine interface to realize the function that input and playback pictures and texts.The two parts of the device communicate with each other through wireless communication.The image and text input controller can control the main unit to switch different tasks and change the content of linear array displayed.
ICN6201/02 is a bridge chip which receives MIPI? DSI inputs and sends LVDS outputs.
MIPI? DSI supports up to 4 lanes and each lane operates at 1Gbps maximum; the totally maximum input
bandwidth is 4Gbps; and the MIPI defined ULPS(ultra-low-power state) is also supported. ICN6201 decodes
MIPI? DSI 18bepp RGB666 and 24bpp RGB888 packets.The LVDS output 18 or 24 bits pixel with 25MHz to 154MHz, by VESA or JEIDA format.ICN6201/02 support video resolution up to FHD (1920x1080) and WUXGA (1920x1200).ICN6201 adopts QFN48 package and ICN6202 adopts QFN40 package