RS_latch using vhdl,
When using static gates as building blocks, the most fundamental latch is the simple SR latch, where S and R stand for set and reset. It can be constructed from a pair of cross-coupled NOR (Not OR) logic gates. The stored bit is present on the output marked Q.
Normally, in storage mode, the S and R inputs are both low, and feedback maintains the Q and Q outputs in a constant state, with Q the complement of Q. If S (Set) is pulsed high while R is held low, then the Q output is forced high, and stays high when S returns to low similarly, if R (Reset) is pulsed high while S is held low, then the Q output is forced low, and stays low when R returns to low.
ADIAL Basis Function (RBF) networks were introduced
into the neural network literature by Broomhead and
Lowe [1], which are motivated by observation on the local
response in biologic neurons. Due to their better
approximation capabilities, simpler network structures and
faster learning algorithms, RBF networks have been widely applied in many science and engineering fields. RBF network is three layers feedback network, where each hidden unit implements a radial activation function and each output unit implements a weighted sum of hidden units’ outputs.
Abstract—Stable direct and indirect decentralized adaptive radial basis
neural network controllers are presented for a class of interconnected
nonlinear systems. The feedback and adaptation mechanisms for each
subsystem depend only upon local measurements to provide asymptotic
tracking of a reference trajectory. Due to the functional approximation
capabilities of radial basis neural networks, the dynamics for each
subsystem are not required to be linear in a set of unknown coeffi cients
as is typically required in decentralized adaptive schemes. In addition,
each subsystem is able to adaptively compensate for disturbances and
interconnections with unknown bounds.
The BTS5016SDA is a one channel high-side power switch in PG-TO252-5-11 package providing embedded
protective functions.
The power transistor is built by a N-channel vertical power MOSFET with charge pump. The design is based on
Smart SIPMOS chip on chip technology.
The BTS5016SDA has a current controlled input and offers a diagnostic feedback with load current sense and a
defined fault signal in case of overload operation, overtemperature shutdown and/or short circuit shutdown.
PRODUCT DESCRIPTION
The AD810 is a composite and HDTV compatible, current
feedback, video operational amplifier, ideal for use in systems
such as multimedia, digital tape recorders and video cameras.
The 0.1 dB flatness specification at bandwidth of 30 MHz
(G = +2) and the differential gain and phase of 0.02% and
0.04° (NTSC) make the AD810 ideal for any broadcast quality
video system. All these specifications are under load conditions
of 150 ? (one 75 ? back terminated cable).
The AD810 is ideal for power sensitive applications such as
video cameras, offering a low power supply current of 8.0 mA
max. The disable feature reduces the power supply current to
only 2.1 mA, while the amplifier is not in use, to conserve
power. Furthermore the AD810 is specified over a power supply
range of ±5 V to ±15 V.
transimpedance linearization circuitry. This allows it to drive
video loads with excellent differential gain and phase perfor
mance on only 50 mW of power. The AD8001 is a current
feedback amplifier and features gain flatness of 0.1 dB to 100 MHz
while offering differential gain and phase error of 0.01% and
0.025°. This makes the AD8001 ideal for professional video
electronics such as cameras and video switchers. Additionally,
the AD8001’s low distortion and fast settling make it ideal for
buffer high-speed A-to-D converters.
The AD8001 offers low power of 5.5 mA max (VS = ±5 V) and
can run on a single +12 V power supply, while being capable of
delivering over 70 mA of load current. These features make this
amplifier ideal for portable and battery-powered applications
where size and power are critical.
The outstanding bandwidth of 800 MHz along with 1200 V/μs
of slew rate make the AD8001 useful in many general purpose
high-speed applications where dual power supplies of up to ±6 V
and single supplies from 6 V to 12 V are needed. The AD8001 is
available in the industrial temperature range of –40°C to +85°C.
This book is intended for RF planners, to serve as a practical tool in their daily work
designing indoor radio distribution systems.
Based on feedback from readers of the first edition it was clear to me that I needed to add
more material and in depth description of the basics of indoor systems based on using
repeaters; this has grown into a new Section 4.7.
There was also a strong demand to add more detail and dedicate a full chapter to radio
planning in tunnels, for both rail and road tunnels; and redundancy principles in the design
focus for solving the challenge of handover zones. An entire Chapter 11 is now dedicated to
tunnel radio planning.
The following sections profile many of the vendors in the NFV market. The individual profiles were created
through a collaborative effort between SDNCentral’s Research Team and the Vendor’s product experts.
SDNCentral worked under the assumption the information provided by the vendors was factual, auditing the
submissions only to remove unverifiable claims and hyperbole. Extended profiles can be viewed online.
While every attempt has been made to validate the capabilities listed in the profiles, SDNCentral advises end
users to verify the veracity of each claim for themselves in their actual deployment environments. SDNCentral
cannot be held liable for unexpected operations, damages or incorrect operation due to any inaccuracies listed
here. SDNCentral welcomes feedback and additional information from end users based on their real-world
experiences with the products and technologies listed. The SDNCentral research team can be reached at
This book introduces students to the theory and practice of control systems engineer-
ing. The text emphasizes the practical application of the subject to the analysis and
design of feedback systems.
The study of control systems engineering is essential for students pursuing
degrees in electrical, mechanical, aerospace, biomedical, or chemical engineering.
Control systems are found in a broad range of applications within these disciplines,
from aircraft and spacecraft to robots and process control systems.
