Organic light-Emitting Diodes OLED
標簽： light-Emitting Organic Diodes OLED
上傳時間： 2013-07-11
上傳用戶：eeworm
LED（Light Emitting Diode），發光二極管，是一種固態的半導體器件，它可以直接把電轉化為光
標簽： Emitting Diode Light LED
上傳時間： 2013-12-12
上傳用戶：13188549192
Visible light communications (VLC) is the name given to an optical wireless communication system that carries information by modulating light in the visible spectrum (400–700 nm) that is principally used for illumination [1–3]. The communications signal is encoded on top of the illumination light. Interest in VLC has grown rapidly with the growth of high power light emitting diodes (LEDs) in the visible spectrum. The motivation to use the illumination light for communication is to save energy by exploiting the illumination to carry information and, at the same time, to use technology that is “green” in comparison to radio frequency (RF) technology, while using the existing infrastructure of the lighting system.
標簽： Communication Visible Light
上傳時間： 2020-06-01
上傳用戶：shancjb
大功率照明LED（Light Emitting Diode）是新一代光源，它光轉換效率高，也稱作綠色光源。由于大功率照明LED本身的伏安特性，大功率LED的開關電源的研究從一開始就遇到了困難。而發展LED照明是現在節能環保的大趨勢，所以研究開發一種新型的大功率照明LED開關電源是很有必要的。 本文簡要介紹了大功率LED的發光特性、伏安特性及其驅動方案，并回顧了大功率LED開關電源的發展歷史，展望了未來趨勢。給出了大功率LED開關電源課題的背景，并分析了設計難點。在此基礎上，提出了一種新型兩級式方案，前級為PFC級，后級為DC/DC級。PFC級采用電感電流臨界連續模式的Boost變換器，DC/DC級采用準諧振模式的反激變換器。為了提高PFC級在低電壓輸入時的效率，采用了變電壓輸出的控制方案。 文中首先對采用臨界連續工作模式的功率因數校正級的工作原理和主電路參數進行推導與設計，以及對基于L6562的PFC控制電路的設計進行了詳細的研究。其次詳細介紹了準諧振模式的理論基礎和應用，對基于NCP1377B的反激變換器的工作原理和穩態特性進行了詳細的分析；在此基礎上提出了一種高效低損耗的準諧振變換器的設計方案。論文詳細介紹了該方案的工作原理和特點，并分析了鉗位電路及基于TSM103的恒壓/恒流電路及線性穩壓器在提出的兩級式方案中的應用。 結合上面提到的方案，本文研制了一臺全球輸入電壓范圍（90～265Vac），12V/5A輸出的大功率照明LED開關電源，實驗結果驗證了所提方案的可行性。
上傳時間： 2013-07-15
上傳用戶：大融融rr
發光二極體(Light Emitting Diode, LED)為半導體發光之固態光源。它成為具省電、輕巧、壽命長、環保(不含汞)等優點之新世代照明光源。目前LED已開始應用於液晶顯示
標簽： LED 電源 方案 驅動器
上傳時間： 2013-04-24
上傳用戶：王慶才
近年來，LED(light emitting diode，發光二極管)電子顯示屏作為一種高科技產品日益引起人們的重視。它可以實時顯示或循環播放文字、圖形和圖像信息，具有顯示方式豐富、觀賞性強、顯示內容修改方便、亮度高、顯示穩定且壽命長等多種優點，被廣泛應用于商業廣告、體育比賽、交通信息報導等諸多領域。 LED顯示屏的核心技術主要集中在控制器中。目前，大部分異步顯示屏采用的是8位或16位的微控制器，由于受到微處理器的處理速度、體系架構、尋址范圍、外圍接口資源等諸多限制，已難以在要求顯示較多像素、顯示內容幀頻較高、動態顯示效果復雜的情況下得到良好的動態視覺效果。 針對以上情況，本文研究開發了一種全新的，由32位高性能ARM微處理器組成的LED顯示屏控制系統，就控制平臺、硬件結構和軟件開發實現給出了驅動部分和控制部分的詳細分析與設計。 本文根據LED顯示屏在列車車廂和火車、汽車車站旅客導向系統中為應用背景，結合LPC2138的功能特點和LED顯示屏的功能需求。詳細介紹了顯示屏控制系統中包括電源模塊、復位模塊、RS485通訊電路等主要模塊的設計。成功實現了數據掃描、數據發送、數據通訊等LED顯示屏所需的功能。 結合控制系統RS485通訊協議和系統顯示的要求，分析了LED顯示屏通訊和控制系統的軟件開發流程。并詳細分析了顯示屏的靜、動態圖文顯示軟件流程結構；系統從上位機接受數據到信息顯示的整個軟件處理流程。 最后本文分析了LED顯示屏控制系統研發中所遇到的幾個難點問題，包括：提高RS485總線可靠性和抗干擾問題、系統在頻繁更換內容死機的問題、顯示內容較多時視覺效果的處理問題，并給出了解決方法。 經過實際測試，本文所述LED顯示屏控制系統性能良好，工作穩定可靠，易于維護升級，具有很高的性價比。
上傳時間： 2013-05-28
上傳用戶：chongchong2016
A light-Emitting diode (LED) is a semiconductor device that emits narrow-spectrum incoherent light when forward-biased.The color of the emitted light depends on the chemical composition of the semiconductor material used, and can benear-ultraviolet, visible or infrared. LEDs are more prevalent today than ever before, replacing traditional incandescent andfluorescent bulbs in many lighting applications. Incandescents use a heated filament, are subject to breakage and burnoutand operate at a luminous efficiency of 2% to 4%. Fluorescents are more efficient, at 7% to 12%, but require highdrive voltage and contain mercury, a toxic substance that may be eventually banned in certain countries. LEDs, however,produce light directly through electroluminescence, operate at low voltage and can deliver over 20% luminous efficiency.
上傳時間： 2013-11-07
上傳用戶：xiaoyuer
This application report discusses the design of non-invasive optical plethysmographyalso called as pulsoximeter using the MSP430FG437 Microcontroller (MCU). Thepulsoximeter consists of a peripheral probe combined with the MCU displaying theoxygen saturation and pulse rate on a LCD glass. The same sensor is used for bothheart-rate detection and pulsoximetering in this application. The probe is placed on aperipheral point of the body such as a finger tip, ear lobe or the nose. The probeincludes two light emitting diodes (LEDs), one in the visible red spectrum (660nm) andthe other in the infrared spectrum (940nm). The percentage of oxygen in the body isworked by measuring the intensity from each frequency of light after it transmitsthrough the body and then calculating the ratio between these two intensities.
標簽： Pulsoximeter Single-Chip Des
上傳時間： 2013-10-27
上傳用戶：黑漆漆
摘要：本水位監測報警器使用5V低壓直流電源（也可以用3節5號電池代替）就可以對5~15厘米的水位進行監測，用LED顯示和數碼管顯示水位，并可以對不再此范圍內的水位發出報警。主要采用CD4066、74LS86、74LS32、CD4511芯片，再加上數碼管、蜂鳴器、發光二極管、電阻這些器件組成一個簡單而靈敏的監測報警電路，操作簡單，接通電源即可工作。因?yàn)榇蟛糠蛛娐凡捎脭?shù)字電路，所以本水位監測報警器還具有耗能低、準確性高的特點。關鍵字：譯碼電路 報警電路 監測電路 Abstract: The water level alarm monitoring the use of 5 V low-voltage DC power (can also use three batteries replaced on the 5th) will be able to 5 to 15 centimeters of water level monitoring, with LED display and digital display of water level, and this can no longer Within the scope of a water level alarm. Mainly CD4066, 74LS86, 74LS32, CD4511 chips, coupled with digital control, buzzer, light-Emitting diode, the resistance of these devices composed of a simple and sensitive monitoring alarm circuits. Because the majority of circuits using digital circuitry, so the water level monitored alarm system also has low energy consumption, high accuracy of the characteristics. Keyword: Decoding circuit alarm circuit monitoring circuit
標簽： 水位 監測報警 系統原理
上傳時間： 2013-11-05
上傳用戶：王慶才
This application report discusses the design of non-invasive optical plethysmography also called as pulsoximeter using the MSP430FG437 Microcontroller (MCU). The pulsoximeter consists of a peripheral probe combined with the MCU displaying the oxygen saturation and pulse rate on a LCD glass. The same sensor is used for both heart-rate detection and pulsoximetering in this application. The probe is placed on a peripheral point of the body such as a finger tip, ear lobe or the nose. The probe includes two light emitting diodes (LEDs), one in the visible red spectrum (660nm) and the other in the infrared spectrum (940nm). The percentage of oxygen in the body is worked by measuring the intensity from each frequency of light after it transmits through the body and then calculating the ratio between these two intensities.
標簽： plethysmography non-invasive application discusses
上傳時間： 2014-01-17
上傳用戶：天誠24
蟲蟲下載站版權所有 京ICP備2021023401號-1
<li id="i2ssq"></li>