This book is about the digital logic design of microprocessors. It is intended to provide both an understanding of the basic principles of digital logic design, and how these fundamental principles are applied in the building of complex microprocessor circuits using current technologies.
Semiconductor memory, card readers, microprocessors,disc drives, piezoelectric devices and digitally based systemsfurnish transient loads that a voltage regulator mustservice. Ideally, regulator output is invariant during a loadtransient. In practice, some variation is encountered andbecomes problematic if allowable operating voltage tolerancesare exceeded. This mandates testing the regulatorand its associated support components to verify desiredperformance under transient loading conditions. Variousmethods are employable to generate transient loads, allowingobservation of regulator response
Abstract: How can an interface change a happy face to a sad face? Engineers have happy faces when an interface works properly.Sad faces indicate failure somewhere. Because interfaces between microprocessors and ICs are simple—even easy—they are oftenignored until interface failure causes sad faces all around. In this article, we discuss a common SPI error that can be almostimpossible to find in a large system. Links to interface tutorial information are provided for complete information. Noise as a systemissue and ICs to minimize its effects are also described.
A collection of interface applications between various microprocessors/ controllers and the LTC1090 family of data acquisition systems. The note is divided into sections specific to each interface.
SL811開發(fā)資料_包含源程序_電路圖_芯片資料:SL811HS Embedded USB Host/Slave Controller.The SL811HS is an Embedded USB Host/Slave Controller capable of communicate with either full-speed or low-speed USB peripherals. The SL811HS can interface to devices such as microprocessors, microcontrollers, DSPs, or directly to a variety of buses such as ISA, PCMCIA, and others. The SL811HS USB Host Controller conforms to USB Specification 1.1.The SL811HS USB Host/Slave Controller incorporates USB Serial Interface functionality along with internal full-/low-speed transceivers.The SL811HS supports and operates in USB full-speed mode at 12 Mbps, or at low-speed 1.5-Mbps mode.The SL811HS data port and microprocessor interface provide an 8-bit data path I/O or DMA bidirectional, with interrupt support to allow easy interface to standard microprocessors or microcontrollers such as Motorola or Intel CPUs and many others. Internally,the SL811HS contains a 256-byte RAM data buffer which is used for control registers and data buffer.The available package types offered are a 28-pin PLCC (SL811HS) and a 48-pin TQFP package (SL811HST-AC). Both packages operate at 3.3 VDC. The I/O interface logic is 5V-tolerant.
The ability to write efficient, high-speed arithmetic routines ultimately depends
upon your knowledge of the elements of arithmetic as they exist on a computer. That
conclusion and this book are the result of a long and frustrating search for
information on writing arithmetic routines for real-time embedded systems.
With instruction cycle times coming down and clock rates going up, it would
seem that speed is not a problem in writing fast routines. In addition, math
coprocessors are becoming more popular and less expensive than ever before and are
readily available. These factors make arithmetic easier and faster to use and
implement. However, for many of you the systems that you are working on do not
include the latest chips or the faster processors. Some of the most widely used
microcontrollers used today are not Digital Signal Processors (DSP), but simple
eight-bit controllers such as the Intel 8051 or 8048 microprocessors.
Avalon Interface Specification,The Avalon interface specification is designed to accommodate peripheral development for the system-on-a-programmable-chip (SOPC) environment. The specification provides peripheral designers with a basis for describing the address-based read/write interface found on master and slave peripherals, such as microprocessors, memory, UART, timer, etc.
The purpose of this document is to define the format of the messages and data being
communicated between microprocessors used in heavy-duty vehicle applications. It is meant to serve as a
guide toward a standard practice to promote software compatibility among microcomputer based modules.
This document is to be used with SAE J1708. SAE J1708 defines the requirements for the hardware and
basic protocol that is needed to implement this document.
In C Algorithms for Real-Time DSP, author Paul M. Embree presents a complete guide to digital signal processing techniques in the C programming language. This book is structured in such a way that it will be most useful to the engineer who is familiar with DSP and the C language, but who is not necessarily an expert in both. All of the example programs in this book have been tested using standard C compilers in the UNIX and MS-DOS programming environments. In addition, the examples have been compiled using the real-time programing tools of specific real-time embedded DSP microprocessors (Analog Devices ADSP-21020 and ADSP-21062 Texas Instruments TMS320C30 and TMS320C40 and AT&T DSP32C) and then tested with real-time hardware using real-world signals.
