PCA9544A 4channel I2C multiple - 免費下載
單片機編程資源
文件大小：150 K
?? 資源詳細信息
?? 溫馨提示：本資源由用戶 gwthaha 上傳分享，僅供學習交流使用。如有侵權，請聯系我們刪除。
資源簡介
The PCA9544A provides 4 interrupt inputs, one for each channel
and one open drain interrupt output. When an interrupt is generated by
any device, it will be detected by the PCA9544A and the interrupt
output will be driven LOW. The channel need not be active for
detection of the interrupt. A bit is also set in the control byte.
Bits 4 – 7 of the control byte correspond to channels 0 – 3 of the
PCA9544A, respectively. Therefore, if an interrupt is generated by
any device connected to channel 2, the state of the interrupt inputs is
loaded into the control register when a read is accomplished.
Likewise, an interrupt on any device connected to channel 0 would
cause bit 4 of the control register to be set on the read. The master
can then address the PCA9544A and read the contents of the
control byte to determine which channel contains the device
generating the interrupt. The master can then reconfigure the
PCA9544A to select this channel, and locate the device generating
the interrupt and clear it. The interrupt clears when the device
originating the interrupt clears.
and one open drain interrupt output. When an interrupt is generated by
any device, it will be detected by the PCA9544A and the interrupt
output will be driven LOW. The channel need not be active for
detection of the interrupt. A bit is also set in the control byte.
Bits 4 – 7 of the control byte correspond to channels 0 – 3 of the
PCA9544A, respectively. Therefore, if an interrupt is generated by
any device connected to channel 2, the state of the interrupt inputs is
loaded into the control register when a read is accomplished.
Likewise, an interrupt on any device connected to channel 0 would
cause bit 4 of the control register to be set on the read. The master
can then address the PCA9544A and read the contents of the
control byte to determine which channel contains the device
generating the interrupt. The master can then reconfigure the
PCA9544A to select this channel, and locate the device generating
the interrupt and clear it. The interrupt clears when the device
originating the interrupt clears.
立即下載此資源
提示：下載后請用壓縮軟件解壓，推薦使用 WinRAR 或 7-Zip
資源說明
下載說明
- 下載需消耗 2積分
- 24小時內重復下載不扣分
- 支持斷點續傳
- 資源永久有效
使用說明
- 下載后用解壓軟件解壓
- 推薦 WinRAR 或 7-Zip
- 如有密碼請查看說明
- 解壓后即可使用
積分獲取
- 上傳資源獲得積分
- 每日簽到免費領取
- 邀請好友注冊獎勵
- 查看詳情 →