?? 資源詳細信息
?? 溫馨提示:本資源由用戶 test222 上傳分享,僅供學習交流使用。如有侵權,請聯系我們刪除。
資源簡介
The MAX3243E device consists of three line drivers, five line receivers, and a dual charge-pump circuit with±15-kV ESD (HBM and IEC61000-4-2, Air-Gap Discharge) and ±8-kV ESD (IEC61000-4-2, Contact Discharge)protection on serial-port connection pins. The device meets the requirements of TIA/EIA-232-F and provides theelectrical interface between an asynchronous communication controller and the serial-port connector. Thiscombination of drivers and receivers matches that needed for the typical serial port used in an IBM PC/AT, orcompatible. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-Vsupply. In addition, the device includes an always-active noninverting output (ROUT2B), which allowsapplications using the ring indicator to transmit data while the device is powered down. The device operates atdata signaling rates up to 250 kbit/s and a maximum of 30-V/ms driver output slew rate.
立即下載此資源
資源說明
下載說明
- 下載需消耗 2積分
- 24小時內重復下載不扣分
- 支持斷點續傳
- 資源永久有效
使用說明
- 下載后用解壓軟件解壓
- 推薦 WinRAR 或 7-Zip
- 如有密碼請查看說明
- 解壓后即可使用
積分獲取
- 上傳資源獲得積分
- 每日簽到免費領取
- 邀請好友注冊獎勵
- 查看詳情 →