?? comintr.cpp
字號:
/************************************************************
Defines a function as an interrupt handler.
interrupt <function-definition>(...) ;
All CPU registers are saved and the function is terminated with an IRET instruction.
When you use the interrupt keyword,
1.the Stack warning checkbox should be unchecked (off),
2.the Register Variables option should be set to None.
**************************************************************/
#include <dos.h>
#include <stdio.h>
#include <conio.h>
#include <stdlib.h>
#include <string.h>
#include <bios.h>
#define com1 0x3F8
#define com2 0x2F8
int COM=com2;
unsigned char bdh=0x00,bdl=0x0c;
unsigned char sbuf[100]; //發送緩沖區
unsigned char rbuf[20][100]; //接收緩沖區
unsigned char rbuf1[100]; //接收緩沖區
int ri=0,si=0,k=0,x=0;
int rif=0,sif=0,sif1=0;
float pra[4][4]={11,12,13,14,21,22,23,24};
//===================================================
void interrupt (*old_int_com1)(...); //老的通信中斷程序
void interrupt (*old_int_com2)(...); //老的通信中斷程序
void interrupt new_int(...) //自己的通信中斷程序
{
unsigned char statue;
unsigned char ch;
do{ //COM2
statue=inp(COM+2); //讀取中斷標識寄存器
if(statue == 0x02) //是否為發送中斷?
{
if(sif) { outp(COM,sbuf[si]);sif1=1;}
else sif1=0;
if(!sbuf[si]) sif=0;
si++;
}
if(statue == 0x04) //是否為接收中斷?
{
ch=inp(COM);
if(ch==255) {ri=0;ch=254;}
rbuf[k][ri++]=ch;
if(!ch) {rbuf[k][0]=255;k++;ri=0;if(k>19) k=0;}
}
}while(inp(COM+2)!= 0x01); //是否還有中斷?
outp(0x20,0x20); //通知8259中斷處理結束
}
//===================================================
void send(unsigned char f1,unsigned char f2,float f3)
{
while(sif1);
sbuf[0]=255;
sbuf[1]=f1;
sbuf[2]=f2;
sprintf(&sbuf[3],"%6.1f",f3);
si=1;
sif=sif1=1;
outp(COM, sbuf[0]); //啟動中斷發送
}
//===================================================
void sendc(unsigned char f1)
{
while(sif1);
sbuf[0]=255;
sbuf[1]=f1;
sbuf[2]=0;
si=1;
sif=sif1=1;
outp(COM, sbuf[0]); //啟動中斷發送
}
//===================================================
void set_com()
{
asm cli //disable(); 關中斷
setvect(0x0B, old_int_com2); //恢復老的中斷向量
setvect(0x0C, old_int_com1); //恢復老的中斷向量
if(COM==com2)
setvect(0x0B ,new_int ); //使新的中斷向量指向自己的通信中斷程序。
if(COM==com1)
setvect(0x0C ,new_int ); //使新的中斷向量指向自己的通信中斷程序。
outp(COM+3,0x80); //置DLAB=1,允許訪問波特率因子寄存器
outp(COM,bdl); //寫入波特率因子LSB,設置通信波特率=9600
outp(COM+1,bdh); //寫入波特率因子MSB
outp(COM+3,0x03); //設置通信格式（無校驗,停止位=1,數據位=8）
if(COM==com1)
outp(0x21, inp(0x21)&0xEF); //xxx0 xxxx，允許IRQ4中斷請求COM1
if(COM==com2)
outp(0x21, inp(0x21)&0xF7); //xxxx 0xxx，允許IRQ3中斷請求COM2
outp(COM+4,0x08); //設置MODEM控制寄存器，OUT2=1，
//允許8250產生的中斷進入8259
outp(COM+1,0x03); //設置中斷允許寄存器，允許發送、接收中斷
asm sti //enable();開中斷
clrscr();
textcolor(14);
cprintf("RS-232 communications (serial I/O) TEST V1.2 by Chen Jiaqi 2000\n");
printf("\n");
if(COM==com2)
printf("Com2 Test[B=9600,S=1,P=None]; Press [F5]->Com1;\n");
if(COM==com1)
printf("Com1 Test[B=9600,S=1,P=None]; Press [F5]->Com2;\n");
printf("Press [F1]->Send Pra. of Group 1; Press [F2]->Send Pra. of Group 2\n");
printf("Press [F3]->Get Pra. of Group 1; Press [F4]->Get Pra. of Group 2\n");
printf("Press [Esc]->Quit;\n");
}
//===================================================
void main()
{
int i,ch,j,comn=0;
union k{ char c[2]; int i; } key;
old_int_com1 =getvect(0x0C); //修改中斷向量表（COM1：0CH, COM2：0BH）
old_int_com2 =getvect(0x0B); //修改中斷向量表（COM1：0CH, COM2：0BH）
COM=com2; //Com2
set_com();
for(i=0;i<20;i++)
rbuf[i][0]=0;
for( ; ; )
{
for(i=0;i<20;i++)
{
if(rbuf[i][0]==255)
{
for(j=0;j<100;j++)
rbuf1[j]=rbuf[i][j];
rif=1;
rbuf[i][0]=0;
break;
}
}
if(rif)
{
i=0;
do{
printf("%d,",rbuf1[i++]);
}while(rbuf1[i-1]);
switch(rbuf1[1])
{
case 1:
switch(rbuf1[2])
{
case 1:
printf("[No.1.1 %6.1f],",pra[0][0]=atof(&rbuf1[3]));
break;
case 2:
printf("[No.1.2 %6.1f],",pra[0][1]=atof(&rbuf1[3]));
break;
case 3:
printf("[No.1.3 %6.1f],",pra[0][2]=atof(&rbuf1[3]));
break;
case 4:
printf("[No.1.4 %6.1f],",pra[0][3]=atof(&rbuf1[3]));
break;
}
break;
case 2:
switch(rbuf1[2])
{
case 1:
printf("[No.2.1 %6.1f],",pra[1][0]=atof(&rbuf1[3]));
break;
case 2:
printf("[No.2.2 %6.1f],",pra[1][1]=atof(&rbuf1[3]));
break;
case 3:
printf("[No.2.3 %6.1f],",pra[1][2]=atof(&rbuf1[3]));
break;
case 4:
printf("[No.2.4 %6.1f],",pra[1][3]=atof(&rbuf1[3]));
break;
}
break;
case 11:
send(1,1,pra[0][0]);
send(1,2,pra[0][1]);
send(1,3,pra[0][2]);
send(1,4,pra[0][3]);
break;
case 21:
send(2,1,pra[1][0]);
send(2,2,pra[1][1]);
send(2,3,pra[1][2]);
send(2,4,pra[1][3]);
break;
}
printf("\n");
rif=0;
}
if(kbhit())
{
key.i=bioskey(0);
if(key.c[0]==27) break; //按Esc鍵退出！
if(key.c[0]=='q'||key.c[0]=='Q') break;//按Q鍵退出！
if(!key.c[0])
switch(key.c[1])
{
case 59: //F1: Send Pra. of Group 1
send(1,1,pra[0][0]);
send(1,2,pra[0][1]);
send(1,3,pra[0][2]);
send(1,4,pra[0][3]);
printf("Send Pra. of Group 1 = Ok!\n");
break;
case 60: //F2: Send Pra. of Group 2
send(2,1,pra[1][0]);
send(2,2,pra[1][1]);
send(2,3,pra[1][2]);
send(2,4,pra[1][3]);
printf("Send Pra. of Group 2 = Ok!\n");
break;
case 61: //F2: Get Pra. of Group 1
sendc(11);
printf("Send command (Get Pra. of Group 1) = Ok!\n");
break;
case 62: //F2: Get Pra. of Group 2
sendc(21);
printf("Send command (Get Pra. of Group 2) = Ok!\n");
break;
case 63: //F5: Com1<->Com2
if(comn=!comn)
{
COM=com1; //Com1
set_com();
}
else
{
COM=com2; //Com2
set_com();
}
break;
}
}
}
asm cli //disable();
outp(COM+1,0x00); //設置中斷允許寄存器，關閉發送、接收中斷
outp(COM+4,0x00); //關閉8250產生的中斷進入8259
if(COM==com2)
outp(0x21, inp(0x21) | 0x08); //xxxx 1xxx，關閉IRQ3中斷請求COM2
if(COM==com1)
outp(0x21, inp(0x21) | 0x10); //xxx1 xxxx，關閉IRQ4中斷請求COM1
setvect(0x0B, old_int_com2); //恢復老的中斷向量
setvect(0x0C, old_int_com1); //恢復老的中斷向量
asm sti //enable();
}
//===================================================
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -