?? debounce.pin
字號:
-- Copyright (C) 1991-2004 Altera Corporation
-- Any megafunction design, and related netlist (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only
-- to program PLD devices (but not masked PLD devices) from Altera. Any
-- other use of such megafunction design, netlist, support information,
-- device programming or simulation file, or any other related documentation
-- or information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to the
-- intellectual property, including patents, copyrights, trademarks, trade
-- secrets, or maskworks, embodied in any such megafunction design, netlist,
-- support information, device programming or simulation file, or any other
-- related documentation or information provided by Altera or a megafunction
-- partner, remains with Altera, the megafunction partner, or their respective
-- licensors. No other licenses, including any licenses needed under any third
-- party's intellectual property, are provided herein.
--
-- This is a Quartus II output file. It is for reporting purposes only, and is
-- not intended for use as a Quartus II input file. This file cannot be used
-- to make Quartus II pin assignments - for instructions on how to make pin
-- assignments, please see Quartus II help.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCC_INT : Dedicated power pin, which MUST be connected to VCC (1.8V).
-- VCC_IO : Dedicated power pin, which MUST be connected to VCC (Refer to
-- the table below for voltage).
-- GND : Dedicated ground pin, which MUST be connected to GND.
-- GND+ : Unused input. This pin should be connected to GND. It may also
-- be connected to a valid signal on the board (low, high, or
-- toggling) if that signal is required for a different revision
-- of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
------------------------------------------------------------------------------
Quartus II Version 4.1 Build 208 09/10/2004 Service Pack 2 SJ Web Edition
CHIP "debounce" ASSIGNED TO AN: EP20K200EFC484-2X
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
GND : A1 : gnd : : : :
GND* : A2 : : : : 8 :
GND* : A3 : : : : 8 :
GND* : A4 : : : : 8 :
GND* : A5 : : : : 8 :
GND* : A6 : : : : 8 :
GND* : A7 : : : : 8 :
GND* : A8 : : : : 8 :
NC : A9 : : : : :
NC : A10 : : : : :
GND : A11 : gnd : : : :
NC : A12 : : : : :
NC : A13 : : : : :
NC : A14 : : : : :
GND* : A15 : : : : 3 :
GND* : A16 : : : : 3 :
GND* : A17 : : : : 3 :
GND* : A18 : : : : 3 :
GND* : A19 : : : : 3 :
GND* : A20 : : : : 3 :
GND* : A21 : : : : 3 :
GND : A22 : gnd : : : :
VCC_INT : B1 : power : : 1.8V : :
GND : B2 : gnd : : : :
GND* : B3 : : : : 8 :
GND* : B4 : : : : 8 :
GND* : B5 : : : : 8 :
GND* : B6 : : : : 8 :
GND* : B7 : : : : 8 :
GND* : B8 : : : : 8 :
GND* : B9 : : : : 8 :
GND* : B10 : : : : 8 :
GND* : B11 : : : : 8 :
GND* : B12 : : : : 3 :
GND* : B13 : : : : 3 :
GND* : B14 : : : : 3 :
GND* : B15 : : : : 3 :
GND* : B16 : : : : 3 :
GND* : B17 : : : : 3 :
GND* : B18 : : : : 3 :
GND* : B19 : : : : 3 :
GND* : B20 : : : : 3 :
GND : B21 : gnd : : : :
VCC_INT : B22 : power : : 1.8V : :
GND* : C1 : : : : 8 :
GND* : C2 : : : : 8 :
GND* : C3 : : : : 8 :
GND* : C4 : : : : 1 :
GND* : C5 : : : : 1 :
GND* : C6 : : : : 1 :
GND* : C7 : : : : 1 :
GND* : C8 : : : : 1 :
GND* : C9 : : : : 1 :
GND* : C10 : : : : 1 :
GND* : C11 : : : : 2 :
GND* : C12 : : : : 2 :
GND* : C13 : : : : 2 :
GND* : C14 : : : : 2 :
GND* : C15 : : : : 2 :
GND* : C16 : : : : 2 :
GND* : C17 : : : : 2 :
GND* : C18 : : : : 2 :
GND* : C19 : : : : 2 :
GND* : C20 : : : : 3 :
GND* : C21 : : : : 3 :
GND* : C22 : : : : 3 :
GND* : D1 : : : : 8 :
GND* : D2 : : : : 8 :
GND* : D3 : : : : 8 :
GND* : D4 : : : : 1 :
GND* : D5 : : : : 1 :
GND* : D6 : : : : 1 :
GND* : D7 : : : : 1 :
GND* : D8 : : : : 1 :
GND* : D9 : : : : 1 :
GND* : D10 : : : : 1 :
GND+ : D11 : : : : 1 :
TRST : D12 : input : : : 1 :
GND* : D13 : : : : 2 :
GND* : D14 : : : : 2 :
GND* : D15 : : : : 2 :
GND* : D16 : : : : 2 :
GND* : D17 : : : : 2 :
GND* : D18 : : : : 2 :
GND* : D19 : : : : 3 :
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -