//
// Module: 	SelectRAM_A2_B36
//
// Description: Verilog instantiation template
//		Block SelectRAM
//		Dual Port A:8192 x 2 bits & B:512 x 36 bits
//
// Device: 	VIRTEX-II Family 
//-------------------------------------------------------------------------------------------
//
// Syntax for Synopsys FPGA Express
// synopsys translate_off

  defparam  

//"Read during Write" attribute for functional simulation
	U_RAMB16_S2_S36.WRITE_MODE_A = "READ_FIRST" -type string; //WRITE_FIRST(default)/ READ_FIRST/ NO_CHANGE 
	U_RAMB16_S2_S36.WRITE_MODE_B = "WRITE_FIRST" -type string; //WRITE_FIRST(default)/ READ_FIRST/ NO_CHANGE 
//RAM initialization ("0" by default) for functional simulation: see example

// synopsys translate_on	


//Block SelectRAM Instantiation
RAMB16_S2_S36 U_RAMB16_S2_S36 (   .DIA(),    //insert 2-bit data_in bus ([1:0]) 
			          .ADDRA(),  //insert 13-bit address bus ([12:0])
			          .ENA(),    //insert enable signal
		 	          .WEA(),    //insert write enable signal
			          .SSRA(),   //insert set/reset signal
			          .CLKA(),   //insert clock signal
			          .DOA(),    //insert 2-bit data_out bus ([1:0]) 
//
			          .DIB(),    //insert 32-bit data_in bus ([31:0]) 
				  .DIPB(),   //insert 4-bit parity data_in bus (35:32])
			          .ADDRB(),  //insert 9-bit address bus ([8:0])
			          .ENB(),    //insert enable signal
		 	          .WEB(),    //insert write enable signal
			          .SSRB(),   //insert set/reset signal
			          .CLKB(),   //insert clock signal
			          .DOB(),    //insert 32-bit data_out bus ([31:0]) 
				  .DOPB()    //insert 4-bit parity data_out bus ([35:32])
				   );
			    

// Attribute Decalrations:
  /* synopsys attribute 

Attribute "Read during Write mode" = WRITE_FIRST(default)/ READ_FIRST/ NO_CHANGE

	WRITE_MODE_A "READ_FIRST"
	WRTIE_MODE_B "WRITE_FIRST"
	*/
//Attributes for RAM initialization ("0" by default): see example