?? jifei.fit
字號:
-- MAX+plus II Compiler Fit File
-- Version 10.0 9/14/2000
-- Compiled: 03/21/2006 14:34:10
-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "jifei"
BEGIN
DEVICE = "EPF10K10LC84-3";
"aq0" : INPUT_PIN = 42 ;
"aq1" : INPUT_PIN = 43 ;
"aq2" : INPUT_PIN = 60 ;
"aq3" : INPUT_PIN = 58 ;
"clk" : INPUT_PIN = 1 ;
"count0" : INPUT_PIN = 48 ;
"count1" : INPUT_PIN = 47 ;
"count2" : INPUT_PIN = 39 ;
"count3" : INPUT_PIN = 38 ;
"dd0" : INPUT_PIN = 84 ;
"dd1" : INPUT_PIN = 44 ;
"dd2" : INPUT_PIN = 50 ;
"dd3" : INPUT_PIN = 49 ;
"ko1" : INPUT_PIN = 36 ;
"ko2" : INPUT_PIN = 37 ;
"load" : INPUT_PIN = 30 ;
"pg" : INPUT_PIN = 2 ;
"reset" : INPUT_PIN = 28 ;
"up_down" : INPUT_PIN = 29 ;
"cout" : OUTPUT_PIN = 64 ;
"out10" : OUTPUT_PIN = 66 ;
"out11" : OUTPUT_PIN = 21 ;
"out12" : OUTPUT_PIN = 22 ;
"out13" : OUTPUT_PIN = 65 ;
"out20" : OUTPUT_PIN = 5 ;
"out21" : OUTPUT_PIN = 6 ;
"out22" : OUTPUT_PIN = 7 ;
"out23" : OUTPUT_PIN = 8 ;
"out30" : OUTPUT_PIN = 9 ;
"out31" : OUTPUT_PIN = 10 ;
"out32" : OUTPUT_PIN = 11 ;
"out33" : OUTPUT_PIN = 16 ;
"out40" : OUTPUT_PIN = 72 ;
"out41" : OUTPUT_PIN = 73 ;
"out42" : OUTPUT_PIN = 78 ;
"out43" : OUTPUT_PIN = 79 ;
"out50" : OUTPUT_PIN = 67 ;
"out51" : OUTPUT_PIN = 25 ;
"out52" : OUTPUT_PIN = 23 ;
"out53" : OUTPUT_PIN = 24 ;
"out60" : OUTPUT_PIN = 80 ;
"out61" : OUTPUT_PIN = 81 ;
"out62" : OUTPUT_PIN = 83 ;
"out63" : OUTPUT_PIN = 3 ;
"|cnt10:u4|LPM_ADD_SUB:109|addcore:adder|:55" : LOCATION = LC3_B21;
"|cnt10:u4|LPM_ADD_SUB:109|addcore:adder|:59" : LOCATION = LC6_B21;
"|cnt10:u4|:9" : LOCATION = LC4_B11; -- |cnt10:u4|cq3
"|cnt10:u4|:10" : LOCATION = LC4_B13; -- |cnt10:u4|cq2
"|cnt10:u4|:11" : LOCATION = LC5_B21; -- |cnt10:u4|cq1
"|cnt10:u4|:12" : LOCATION = LC2_B24; -- |cnt10:u4|cq0
"|cnt10:u4|:80" : LOCATION = LC8_B21;
"|cnt10:u4|:168" : LOCATION = LC1_B21;
"|cnt16:u2|LPM_ADD_SUB:63|addcore:adder|pcarry1" : LOCATION = LC7_B2 ;
"|cnt16:u2|LPM_ADD_SUB:63|addcore:adder|pcarry2" : LOCATION = LC7_B1 ;
"|cnt16:u2|LPM_ADD_SUB:63|addcore:adder|~70~1" : LOCATION = LC4_B2 ;
"|cnt16:u2|LPM_ADD_SUB:63|addcore:adder|~71~1" : LOCATION = LC6_B1 ;
"|cnt16:u2|:20" : LOCATION = LC3_B1 ; -- |cnt16:u2|aaa13
"|cnt16:u2|:21" : LOCATION = LC4_B1 ; -- |cnt16:u2|aaa12
"|cnt16:u2|:22" : LOCATION = LC5_B2 ; -- |cnt16:u2|aaa11
"|cnt16:u2|:23" : LOCATION = LC1_B2 ; -- |cnt16:u2|aaa10
"|cnt16:u2|:73" : LOCATION = LC8_B1 ;
"|cnt16:u2|:100" : LOCATION = LC3_B13;
"|cnt16:u2|:149" : LOCATION = LC1_B1 ;
"|cnt16:u2|:153" : LOCATION = LC5_B1 ;
"|cnt16:u2|:159" : LOCATION = LC2_B1 ;
"|cnt99:u3|LPM_ADD_SUB:196|addcore:adder|:67" : LOCATION = LC5_B4 ;
"|cnt99:u3|LPM_ADD_SUB:196|addcore:adder|:68" : LOCATION = LC7_B4 ;
"|cnt99:u3|LPM_ADD_SUB:434|addcore:adder|:55" : LOCATION = LC1_B13;
"|cnt99:u3|:20" : LOCATION = LC5_B13; -- |cnt99:u3|kk3
"|cnt99:u3|:21" : LOCATION = LC2_B5 ; -- |cnt99:u3|kk2
"|cnt99:u3|:22" : LOCATION = LC1_B5 ; -- |cnt99:u3|kk1
"|cnt99:u3|:23" : LOCATION = LC3_B5 ; -- |cnt99:u3|kk0
"|cnt99:u3|:24" : LOCATION = LC4_B4 ; -- |cnt99:u3|bb3
"|cnt99:u3|:25" : LOCATION = LC6_B4 ; -- |cnt99:u3|bb2
"|cnt99:u3|:26" : LOCATION = LC3_B4 ; -- |cnt99:u3|bb1
"|cnt99:u3|:27" : LOCATION = LC5_B5 ; -- |cnt99:u3|bb0
"|cnt99:u3|:167" : LOCATION = LC2_B4 ;
"|cnt99:u3|:223" : LOCATION = LC8_B4 ;
"|cnt99:u3|:391" : LOCATION = LC1_B4 ;
"|cnt99:u3|:407" : LOCATION = LC4_B5 ;
"|cnt99:u3|:495" : LOCATION = LC2_B13;
"|cnt99:u3|~495~1" : LOCATION = LC6_B5 ;
"|cnt99:u3|:501" : LOCATION = LC8_B5 ;
"|cnt99:u3|:507" : LOCATION = LC7_B5 ;
"|cnt99:u5|LPM_ADD_SUB:196|addcore:adder|:67" : LOCATION = LC5_C23;
"|cnt99:u5|LPM_ADD_SUB:196|addcore:adder|:68" : LOCATION = LC7_C23;
"|cnt99:u5|LPM_ADD_SUB:434|addcore:adder|:55" : LOCATION = LC1_B12;
"|cnt99:u5|:20" : LOCATION = LC5_B10; -- |cnt99:u5|kk3
"|cnt99:u5|:21" : LOCATION = LC4_B10; -- |cnt99:u5|kk2
"|cnt99:u5|:22" : LOCATION = LC8_B2 ; -- |cnt99:u5|kk1
"|cnt99:u5|:23" : LOCATION = LC1_B10; -- |cnt99:u5|kk0
"|cnt99:u5|:24" : LOCATION = LC6_C23; -- |cnt99:u5|bb3
"|cnt99:u5|:25" : LOCATION = LC2_C23; -- |cnt99:u5|bb2
"|cnt99:u5|:26" : LOCATION = LC1_C23; -- |cnt99:u5|bb1
"|cnt99:u5|:27" : LOCATION = LC3_C23; -- |cnt99:u5|bb0
"|cnt99:u5|:167" : LOCATION = LC4_C23;
"|cnt99:u5|:223" : LOCATION = LC8_C23;
"|cnt99:u5|:391" : LOCATION = LC3_B2 ;
"|cnt99:u5|:407" : LOCATION = LC3_B10;
"|cnt99:u5|:495" : LOCATION = LC8_B10;
"|cnt99:u5|~495~1" : LOCATION = LC6_B10;
"|cnt99:u5|:501" : LOCATION = LC7_B10;
"|cnt99:u5|:507" : LOCATION = LC2_B10;
"|cnt99:u5|:533" : LOCATION = LC6_B2 ;
"|cnt99:u5|~533~1" : LOCATION = LC2_B2 ;
"cout~1" : LOCATION = LC7_B13;
"|Fenpin16:u1|:5" : LOCATION = LC4_B8 ; -- |Fenpin16:u1|tmp3
"|Fenpin16:u1|:6" : LOCATION = LC3_B8 ; -- |Fenpin16:u1|tmp2
"|Fenpin16:u1|:7" : LOCATION = LC2_B8 ; -- |Fenpin16:u1|tmp1
"|Fenpin16:u1|:8" : LOCATION = LC1_B8 ; -- |Fenpin16:u1|tmp0
"|Fenpin16:u1|:152" : LOCATION = LC5_B8 ;
"|Fenpin16:u1|~152~1" : LOCATION = LC6_B8 ;
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -