?? d24wave.vhw

?? xilinx xc9572 cpld 實現的伺服電機控制器
?? VHW
?? 第 1 頁 / 共 3 頁
字號:
				STD.TEXTIO.write(TX_LOC, TX_TIME);
				STD.TEXTIO.write(TX_LOC,string'("ns DQ8="));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, DQ8);
				STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_DQ8);
				STD.TEXTIO.write(TX_LOC, string'(" "));
				TX_STR(TX_LOC.all'range) := TX_LOC.all;
				STD.TEXTIO.writeline(results, TX_LOC);
				STD.TEXTIO.Deallocate(TX_LOC);
				ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
				TX_ERROR := TX_ERROR + 1;
			END IF;
		END;

		PROCEDURE CHECK_DQ0(
			next_DQ0 : std_logic;
			TX_TIME : INTEGER
		) IS
			VARIABLE TX_STR : String(1 to 4096);
			VARIABLE TX_LOC : LINE;
		BEGIN
			-- If compiler error ("/=" is ambiguous) occurs in the next line of code
			-- change compiler settings to use explicit declarations only
			IF (DQ0 /= next_DQ0) THEN 
				STD.TEXTIO.write(TX_LOC,string'("Error at time="));
				STD.TEXTIO.write(TX_LOC, TX_TIME);
				STD.TEXTIO.write(TX_LOC,string'("ns DQ0="));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, DQ0);
				STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_DQ0);
				STD.TEXTIO.write(TX_LOC, string'(" "));
				TX_STR(TX_LOC.all'range) := TX_LOC.all;
				STD.TEXTIO.writeline(results, TX_LOC);
				STD.TEXTIO.Deallocate(TX_LOC);
				ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
				TX_ERROR := TX_ERROR + 1;
			END IF;
		END;

		PROCEDURE CHECK_DQ9(
			next_DQ9 : std_logic;
			TX_TIME : INTEGER
		) IS
			VARIABLE TX_STR : String(1 to 4096);
			VARIABLE TX_LOC : LINE;
		BEGIN
			-- If compiler error ("/=" is ambiguous) occurs in the next line of code
			-- change compiler settings to use explicit declarations only
			IF (DQ9 /= next_DQ9) THEN 
				STD.TEXTIO.write(TX_LOC,string'("Error at time="));
				STD.TEXTIO.write(TX_LOC, TX_TIME);
				STD.TEXTIO.write(TX_LOC,string'("ns DQ9="));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, DQ9);
				STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_DQ9);
				STD.TEXTIO.write(TX_LOC, string'(" "));
				TX_STR(TX_LOC.all'range) := TX_LOC.all;
				STD.TEXTIO.writeline(results, TX_LOC);
				STD.TEXTIO.Deallocate(TX_LOC);
				ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
				TX_ERROR := TX_ERROR + 1;
			END IF;
		END;

		PROCEDURE CHECK_DQ10(
			next_DQ10 : std_logic;
			TX_TIME : INTEGER
		) IS
			VARIABLE TX_STR : String(1 to 4096);
			VARIABLE TX_LOC : LINE;
		BEGIN
			-- If compiler error ("/=" is ambiguous) occurs in the next line of code
			-- change compiler settings to use explicit declarations only
			IF (DQ10 /= next_DQ10) THEN 
				STD.TEXTIO.write(TX_LOC,string'("Error at time="));
				STD.TEXTIO.write(TX_LOC, TX_TIME);
				STD.TEXTIO.write(TX_LOC,string'("ns DQ10="));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, DQ10);
				STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_DQ10);
				STD.TEXTIO.write(TX_LOC, string'(" "));
				TX_STR(TX_LOC.all'range) := TX_LOC.all;
				STD.TEXTIO.writeline(results, TX_LOC);
				STD.TEXTIO.Deallocate(TX_LOC);
				ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
				TX_ERROR := TX_ERROR + 1;
			END IF;
		END;

		PROCEDURE CHECK_DQ11(
			next_DQ11 : std_logic;
			TX_TIME : INTEGER
		) IS
			VARIABLE TX_STR : String(1 to 4096);
			VARIABLE TX_LOC : LINE;
		BEGIN
			-- If compiler error ("/=" is ambiguous) occurs in the next line of code
			-- change compiler settings to use explicit declarations only
			IF (DQ11 /= next_DQ11) THEN 
				STD.TEXTIO.write(TX_LOC,string'("Error at time="));
				STD.TEXTIO.write(TX_LOC, TX_TIME);
				STD.TEXTIO.write(TX_LOC,string'("ns DQ11="));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, DQ11);
				STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_DQ11);
				STD.TEXTIO.write(TX_LOC, string'(" "));
				TX_STR(TX_LOC.all'range) := TX_LOC.all;
				STD.TEXTIO.writeline(results, TX_LOC);
				STD.TEXTIO.Deallocate(TX_LOC);
				ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
				TX_ERROR := TX_ERROR + 1;
			END IF;
		END;

		PROCEDURE CHECK_DQ12(
			next_DQ12 : std_logic;
			TX_TIME : INTEGER
		) IS
			VARIABLE TX_STR : String(1 to 4096);
			VARIABLE TX_LOC : LINE;
		BEGIN
			-- If compiler error ("/=" is ambiguous) occurs in the next line of code
			-- change compiler settings to use explicit declarations only
			IF (DQ12 /= next_DQ12) THEN 
				STD.TEXTIO.write(TX_LOC,string'("Error at time="));
				STD.TEXTIO.write(TX_LOC, TX_TIME);
				STD.TEXTIO.write(TX_LOC,string'("ns DQ12="));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, DQ12);
				STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_DQ12);
				STD.TEXTIO.write(TX_LOC, string'(" "));
				TX_STR(TX_LOC.all'range) := TX_LOC.all;
				STD.TEXTIO.writeline(results, TX_LOC);
				STD.TEXTIO.Deallocate(TX_LOC);
				ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
				TX_ERROR := TX_ERROR + 1;
			END IF;
		END;

		PROCEDURE CHECK_DQ13(
			next_DQ13 : std_logic;
			TX_TIME : INTEGER
		) IS
			VARIABLE TX_STR : String(1 to 4096);
			VARIABLE TX_LOC : LINE;
		BEGIN
			-- If compiler error ("/=" is ambiguous) occurs in the next line of code
			-- change compiler settings to use explicit declarations only
			IF (DQ13 /= next_DQ13) THEN 
				STD.TEXTIO.write(TX_LOC,string'("Error at time="));
				STD.TEXTIO.write(TX_LOC, TX_TIME);
				STD.TEXTIO.write(TX_LOC,string'("ns DQ13="));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, DQ13);
				STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_DQ13);
				STD.TEXTIO.write(TX_LOC, string'(" "));
				TX_STR(TX_LOC.all'range) := TX_LOC.all;
				STD.TEXTIO.writeline(results, TX_LOC);
				STD.TEXTIO.Deallocate(TX_LOC);
				ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
				TX_ERROR := TX_ERROR + 1;
			END IF;
		END;

		PROCEDURE CHECK_DQ14(
			next_DQ14 : std_logic;
			TX_TIME : INTEGER
		) IS
			VARIABLE TX_STR : String(1 to 4096);
			VARIABLE TX_LOC : LINE;
		BEGIN
			-- If compiler error ("/=" is ambiguous) occurs in the next line of code
			-- change compiler settings to use explicit declarations only
			IF (DQ14 /= next_DQ14) THEN 
				STD.TEXTIO.write(TX_LOC,string'("Error at time="));
				STD.TEXTIO.write(TX_LOC, TX_TIME);
				STD.TEXTIO.write(TX_LOC,string'("ns DQ14="));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, DQ14);
				STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_DQ14);
				STD.TEXTIO.write(TX_LOC, string'(" "));
				TX_STR(TX_LOC.all'range) := TX_LOC.all;
				STD.TEXTIO.writeline(results, TX_LOC);
				STD.TEXTIO.Deallocate(TX_LOC);
				ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
				TX_ERROR := TX_ERROR + 1;
			END IF;
		END;

		PROCEDURE CHECK_DQ15(
			next_DQ15 : std_logic;
			TX_TIME : INTEGER
		) IS
			VARIABLE TX_STR : String(1 to 4096);
			VARIABLE TX_LOC : LINE;
		BEGIN
			-- If compiler error ("/=" is ambiguous) occurs in the next line of code
			-- change compiler settings to use explicit declarations only
			IF (DQ15 /= next_DQ15) THEN 
				STD.TEXTIO.write(TX_LOC,string'("Error at time="));
				STD.TEXTIO.write(TX_LOC, TX_TIME);
				STD.TEXTIO.write(TX_LOC,string'("ns DQ15="));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, DQ15);
				STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_DQ15);
				STD.TEXTIO.write(TX_LOC, string'(" "));
				TX_STR(TX_LOC.all'range) := TX_LOC.all;
				STD.TEXTIO.writeline(results, TX_LOC);
				STD.TEXTIO.Deallocate(TX_LOC);
				ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
				TX_ERROR := TX_ERROR + 1;
			END IF;
		END;

		PROCEDURE CHECK_DQ16(
			next_DQ16 : std_logic;
			TX_TIME : INTEGER
		) IS
			VARIABLE TX_STR : String(1 to 4096);
			VARIABLE TX_LOC : LINE;
		BEGIN
			-- If compiler error ("/=" is ambiguous) occurs in the next line of code
			-- change compiler settings to use explicit declarations only
			IF (DQ16 /= next_DQ16) THEN 
				STD.TEXTIO.write(TX_LOC,string'("Error at time="));
				STD.TEXTIO.write(TX_LOC, TX_TIME);
				STD.TEXTIO.write(TX_LOC,string'("ns DQ16="));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, DQ16);
				STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_DQ16);
				STD.TEXTIO.write(TX_LOC, string'(" "));
				TX_STR(TX_LOC.all'range) := TX_LOC.all;
				STD.TEXTIO.writeline(results, TX_LOC);
				STD.TEXTIO.Deallocate(TX_LOC);
				ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
				TX_ERROR := TX_ERROR + 1;
			END IF;
		END;

		PROCEDURE CHECK_DQ17(
			next_DQ17 : std_logic;
			TX_TIME : INTEGER
		) IS
			VARIABLE TX_STR : String(1 to 4096);
			VARIABLE TX_LOC : LINE;
		BEGIN
			-- If compiler error ("/=" is ambiguous) occurs in the next line of code
			-- change compiler settings to use explicit declarations only
			IF (DQ17 /= next_DQ17) THEN 
				STD.TEXTIO.write(TX_LOC,string'("Error at time="));
				STD.TEXTIO.write(TX_LOC, TX_TIME);
				STD.TEXTIO.write(TX_LOC,string'("ns DQ17="));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, DQ17);
				STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_DQ17);
				STD.TEXTIO.write(TX_LOC, string'(" "));
				TX_STR(TX_LOC.all'range) := TX_LOC.all;
				STD.TEXTIO.writeline(results, TX_LOC);
				STD.TEXTIO.Deallocate(TX_LOC);
				ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
				TX_ERROR := TX_ERROR + 1;
			END IF;
		END;

		PROCEDURE CHECK_DQ18(
			next_DQ18 : std_logic;
			TX_TIME : INTEGER
		) IS
			VARIABLE TX_STR : String(1 to 4096);
			VARIABLE TX_LOC : LINE;
		BEGIN
			-- If compiler error ("/=" is ambiguous) occurs in the next line of code
			-- change compiler settings to use explicit declarations only
			IF (DQ18 /= next_DQ18) THEN 
				STD.TEXTIO.write(TX_LOC,string'("Error at time="));
				STD.TEXTIO.write(TX_LOC, TX_TIME);
				STD.TEXTIO.write(TX_LOC,string'("ns DQ18="));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, DQ18);
				STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_DQ18);
				STD.TEXTIO.write(TX_LOC, string'(" "));
				TX_STR(TX_LOC.all'range) := TX_LOC.all;
				STD.TEXTIO.writeline(results, TX_LOC);
				STD.TEXTIO.Deallocate(TX_LOC);
				ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
				TX_ERROR := TX_ERROR + 1;
			END IF;
		END;

		PROCEDURE CHECK_DQ19(
			next_DQ19 : std_logic;
			TX_TIME : INTEGER
		) IS
			VARIABLE TX_STR : String(1 to 4096);
			VARIABLE TX_LOC : LINE;
		BEGIN
			-- If compiler error ("/=" is ambiguous) occurs in the next line of code
			-- change compiler settings to use explicit declarations only
			IF (DQ19 /= next_DQ19) THEN 
				STD.TEXTIO.write(TX_LOC,string'("Error at time="));
				STD.TEXTIO.write(TX_LOC, TX_TIME);
				STD.TEXTIO.write(TX_LOC,string'("ns DQ19="));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, DQ19);
				STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_DQ19);
				STD.TEXTIO.write(TX_LOC, string'(" "));
				TX_STR(TX_LOC.all'range) := TX_LOC.all;
				STD.TEXTIO.writeline(results, TX_LOC);
				STD.TEXTIO.Deallocate(TX_LOC);
				ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
				TX_ERROR := TX_ERROR + 1;
?? 文件大小 780 K
?? 上傳用戶 ZHANGYQ23
?? 所屬分類 VHDL/FPGA/Verilog
??? 相關標簽

#xilinx #9572 #cpld #xc
?? 快捷鍵說明

復制代碼 Ctrl + C
搜索代碼 Ctrl + F
全屏模式 F11
切換主題 Ctrl + Shift + D
顯示快捷鍵 ?
增大字號 Ctrl + =
減小字號 Ctrl + -
亚洲欧美第一页_禁久久精品乱码_粉嫩av一区二区三区免费野_久草精品视频

?? d24wave.vhw

?? 快捷鍵說明
