<Linux device driver for Realtek Ethernet controllers>  This is the Linux device driver released for RealTek Ethernet controllers, which are listed as following.	1. RTL8169S/SB/SC (Gigabit Ethernet with PCI interface)	2. RTL8168B (Gigabit Ethernet with PCI-Express interface)	3. RTL8101E (Fast Ethernet with PCI-Express interface)<Requirements>  - kernel source tree (supported versions 2.4.x or 2.6.x)  - compiler/binutils for kernel compilation<Quick install with proper kernel settings>  Unpack the tarball :	unzip r1000_linuxdrv_vxx.zip  Change to the directory:	cd r1000  If you are running the target kernel, then you should be  able to do :	make clean modules	(as root or with sudo)	make install	depmod -a<Force Media Speed> The media can be forced to one of the 5 modes as follows.        Cmd: "insmod r1000 media = SET_MEDIA"        For example:         "insmod r1000 media = 0x04" will force PHY to operate in 100Mpbs Half-duplex.         SET_MEDIA can be:                _10_Half        = 0x01                _10_Full        = 0x02                _100_Half       = 0x04                _100_Full       = 0x08                _1000_Full      = 0x10   Force media type for multiple cards could be performed as:         "insmod r1000 media=0x04,0x10"   which force PHY to operate at 100Mbps half-duplex and 1000Mbps full-duplex.<Advanced feature>  - Supports Jumbo Frame  - Hardware Tx/Rx flow control