?? xst.xmsgs
字號:
<?xml version="1.0" encoding="UTF-8"?>
<!-- IMPORTANT: This is an internal file that has been generated
by the Xilinx ISE software. Any direct editing or
changes made to this file may result in unpredictable
behavior or data corruption. It is strongly advised that
users do not edit the contents of this file. -->
<messages>
<msg type="warning" file="Xst" num="916" delta="unknown" >"<arg fmt="%s" index="1">ddr_cntl_a_s3_ddr_iob.v</arg>" line <arg fmt="%d" index="2">56</arg>: Delay is ignored for synthesis.
</msg>
<msg type="warning" file="Xst" num="916" delta="unknown" >"<arg fmt="%s" index="1">ddr_cntl_a_s3_ddr_iob.v</arg>" line <arg fmt="%d" index="2">55</arg>: Delay is ignored for synthesis.
</msg>
<msg type="warning" file="Xst" num="2321" delta="unknown" >"<arg fmt="%s" index="1">ddr_cntl_a_cmp_data_0.v</arg>" line <arg fmt="%d" index="2">157</arg>: Parameter <arg fmt="%d" index="3">1</arg> (<arg fmt="%s" index="4">$time</arg>) is not supported in call of system task <arg fmt="%s" index="5">$display</arg>.
</msg>
<msg type="warning" file="Xst" num="2323" delta="unknown" >"<arg fmt="%s" index="1">ddr_cntl_a_cmp_data_0.v</arg>" line <arg fmt="%d" index="2">157</arg>: Parameter <arg fmt="%d" index="3">3</arg> is not constant in call of system task <arg fmt="%s" index="4">$display</arg>.
</msg>
<msg type="warning" file="Xst" num="2323" delta="unknown" >"<arg fmt="%s" index="1">ddr_cntl_a_cmp_data_0.v</arg>" line <arg fmt="%d" index="2">157</arg>: Parameter <arg fmt="%d" index="3">4</arg> is not constant in call of system task <arg fmt="%s" index="4">$display</arg>.
</msg>
<msg type="warning" file="Xst" num="2185" delta="unknown" >"<arg fmt="%s" index="1">ddr_cntl_a_clk_dcm.v</arg>" line <arg fmt="%d" index="2">49</arg>: Possible simulation mismatch on property <<arg fmt="%s" index="3">DLL_FREQUENCY_MODE</arg>> of instance <<arg fmt="%s" index="4">DCM_INST1</arg>> set by attribute.
</msg>
<msg type="warning" file="Xst" num="2185" delta="unknown" >"<arg fmt="%s" index="1">ddr_cntl_a_clk_dcm.v</arg>" line <arg fmt="%d" index="2">49</arg>: Possible simulation mismatch on property <<arg fmt="%s" index="3">DUTY_CYCLE_CORRECTION</arg>> of instance <<arg fmt="%s" index="4">DCM_INST1</arg>> set by attribute.
</msg>
<msg type="info" file="Xst" num="1304" delta="unknown" >Contents of register <<arg fmt="%s" index="1">wrburst_end_9</arg>> in unit <<arg fmt="%s" index="2">ddr_cntl_a_controller_0</arg>> never changes during circuit operation. The register is replaced by logic.
</msg>
<msg type="warning" file="Xst" num="647" delta="unknown" >Input <<arg fmt="%s" index="1">rst</arg>> is never used.
</msg>
<msg type="warning" file="Xst" num="647" delta="unknown" >Input <<arg fmt="%s" index="1">u_data_val</arg>> is never used.
</msg>
<msg type="warning" file="Xst" num="646" delta="unknown" >Signal <<arg fmt="%s" index="1">current_state</arg>> is assigned but never used.
</msg>
<msg type="warning" file="Xst" num="646" delta="unknown" >Signal <<arg fmt="%s" index="1">state_bits</arg>> is assigned but never used.
</msg>
<msg type="warning" file="Xst" num="646" delta="unknown" >Signal <<arg fmt="%s" index="1">num_bursts_max</arg>> is assigned but never used.
</msg>
<msg type="warning" file="Xst" num="646" delta="unknown" >Signal <<arg fmt="%s" index="1">init_chek</arg>> is assigned but never used.
</msg>
<msg type="info" file="Xst" num="1799" delta="unknown" >State <arg fmt="%s" index="1">0100</arg> is never reached in FSM <<arg fmt="%s" index="2">next_state</arg>>.
</msg>
<msg type="info" file="Xst" num="1799" delta="unknown" >State <arg fmt="%s" index="1">0111</arg> is never reached in FSM <<arg fmt="%s" index="2">next_state</arg>>.
</msg>
<msg type="info" file="Xst" num="1799" delta="unknown" >State <arg fmt="%s" index="1">0110</arg> is never reached in FSM <<arg fmt="%s" index="2">next_state</arg>>.
</msg>
<msg type="info" file="Xst" num="1799" delta="unknown" >State <arg fmt="%s" index="1">1001</arg> is never reached in FSM <<arg fmt="%s" index="2">next_state</arg>>.
</msg>
<msg type="info" file="Xst" num="1799" delta="unknown" >State <arg fmt="%s" index="1">1011</arg> is never reached in FSM <<arg fmt="%s" index="2">next_state</arg>>.
</msg>
<msg type="info" file="Xst" num="1799" delta="unknown" >State <arg fmt="%s" index="1">1010</arg> is never reached in FSM <<arg fmt="%s" index="2">next_state</arg>>.
</msg>
<msg type="warning" file="Xst" num="1780" delta="unknown" >Signal <<arg fmt="%s" index="1">ddr_dq_o</arg>> is never used or assigned.
</msg>
<msg type="warning" file="Xst" num="647" delta="unknown" >Input <<arg fmt="%s" index="1">write_en_val1</arg>> is never used.
</msg>
<msg type="warning" file="Xst" num="647" delta="unknown" >Input <<arg fmt="%s" index="1">clk90</arg>> is never used.
</msg>
<msg type="warning" file="Xst" num="1780" delta="unknown" >Signal <<arg fmt="%s" index="1">din_delay</arg>> is never used or assigned.
</msg>
<msg type="warning" file="Xst" num="647" delta="unknown" >Input <<arg fmt="%s" index="1">reset270_r</arg>> is never used.
</msg>
<msg type="warning" file="Xst" num="647" delta="unknown" >Input <<arg fmt="%s" index="1">reset90_r</arg>> is never used.
</msg>
<msg type="warning" file="Xst" num="646" delta="unknown" >Signal <<arg fmt="%s" index="1">write_en_P3</arg>> is assigned but never used.
</msg>
<msg type="warning" file="Xst" num="646" delta="unknown" >Signal <<arg fmt="%s" index="1">write_data_m270_3</arg>> is assigned but never used.
</msg>
<msg type="warning" file="Xst" num="646" delta="unknown" >Signal <<arg fmt="%s" index="1">write_data270_3</arg>> is assigned but never used.
</msg>
<msg type="warning" file="Xst" num="646" delta="unknown" >Signal <<arg fmt="%s" index="1">write_en_int</arg>> is assigned but never used.
</msg>
<msg type="warning" file="Xst" num="646" delta="unknown" >Signal <<arg fmt="%s" index="1">write_data_reg_dimm</arg>> is assigned but never used.
</msg>
<msg type="warning" file="Xst" num="646" delta="unknown" >Signal <<arg fmt="%s" index="1">write_data_mask_reg_dimm</arg>> is assigned but never used.
</msg>
<msg type="warning" file="Xst" num="1780" delta="unknown" >Signal <<arg fmt="%s" index="1">rst_dqs_delay_2_n_1</arg>> is never used or assigned.
</msg>
<msg type="warning" file="Xst" num="1780" delta="unknown" >Signal <<arg fmt="%s" index="1">write_data270_1</arg>> is never used or assigned.
</msg>
<msg type="warning" file="Xst" num="1780" delta="unknown" >Signal <<arg fmt="%s" index="1">write_data270_2</arg>> is never used or assigned.
</msg>
<msg type="warning" file="Xst" num="1780" delta="unknown" >Signal <<arg fmt="%s" index="1">rst_dqs_delay_3_n_1</arg>> is never used or assigned.
</msg>
<msg type="warning" file="Xst" num="1780" delta="unknown" >Signal <<arg fmt="%s" index="1">ddr_dq_in</arg>> is never used or assigned.
</msg>
<msg type="warning" file="Xst" num="1780" delta="unknown" >Signal <<arg fmt="%s" index="1">rst_dqs_delay_0_n_1</arg>> is never used or assigned.
</msg>
<msg type="warning" file="Xst" num="1780" delta="unknown" >Signal <<arg fmt="%s" index="1">rst_dqs_delay_1_n_1</arg>> is never used or assigned.
</msg>
<msg type="warning" file="Xst" num="646" delta="unknown" >Signal <<arg fmt="%s" index="1">read_valid_data_1_r2</arg>> is assigned but never used.
</msg>
<msg type="warning" file="Xst" num="1780" delta="unknown" >Signal <<arg fmt="%s" index="1">fifop_rd_addr_r</arg>> is never used or assigned.
</msg>
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -