/*
** LDF for ADSP-BF533.
** 
** This LDF defines an example layout for a system which uses only
** the available L1 SRAM. It does not assume the presence of any
** external memory. See below for memory map descriptions.
** 
** There are a number of configuration options that can be specified
** either by compiler flags, or by linker flags directly. The options are:
** 
** 
** Memory map.
** 
** The known memory spaces are as follows:
** 
** Internal Memory:
** 0xFFE0 0000 - 0xFFFF FFFF		Core MMR registers (2MB)
** 0xFFC0 0000 - 0xFFDF FFFF		System MMR registers (2MB)
** 0xFFB0 1000 - 0xFFBF FFFF		Reserved
** 0xFFB0 0000 - 0xFFB0 0FFF		Scratch SRAM (4K)
** 0xFFA1 4000 - 0xFFAF FFFF		Reserved
** 0xFFA0 0000 - 0xFFA1 3FFF		Instruction SRAM (82K)
** 0xFF90 8000 - 0xFF9F FFFF		Reserved
** 0xFF90 0000 - 0xFF90 7FFF		Data Bank B SRAM (32K)
** 0xFF80 8000 - 0xFF8F FFFF		Reserved
** 0xFF80 0000 - 0xFF80 7FFF		Data Bank A SRAM (32K)
** 0xEF00 0000 - 0xFF7F FFFF		Reserved
**
** External Memory:
** 0x2040 0000 - 0xEEFF FFFF		Reserved
** 0x2030 0000 - 0x203F FFFF		Async Mem Bank 3 (1M)
** 0x2020 0000 - 0x202F FFFF		Async Mem Bank 2 (1M)
** 0x2010 0000 - 0x201F FFFF		Async Mem Bank 1 (1M)
** 0x2000 0000 - 0x200F FFFF		Async Mem Bank 0 (1M)
** 0x0800 0000 - 0x1FFF FFFF		Reserved
** 0x0000 0000 - 0x07FF FFFF		SDRAM (16M - 128M)
*/

ARCHITECTURE(ADSP-BF533)

SEARCH_DIR( $ADI_DSP\Blackfin\lib )


// Libraries from the command line are included in COMMAND_LINE_OBJECTS.


$OBJECTS = $COMMAND_LINE_OBJECTS;
$LIBRARIES = ;

MEMORY
{
#ifdef __EZKIT_LICENSE_RESTRICTION_Blackfin__ /* { */
/* Instruction SRAM, 20K */
MEM_PROGRAM_RAM { TYPE(RAM) START(0xFFA00000) END(0xFFA04FFF) WIDTH(8) }
#else
/* Instruction SRAM, 82K */
MEM_PROGRAM_RAM { TYPE(RAM) START(0xFFA00000) END(0xFFA13FFF) WIDTH(8) }
#endif /* } */
/* Data - normal data, 12K */
MEM_DATA	{ TYPE(RAM) START(0xFF903000) END(0xFF907FFF) WIDTH(8) }
/* Data2 - const data, 4K */
MEM_DATA2       { TYPE(RAM) START(0xFF902000) END(0xFF902FFF) WIDTH(8) } 
/* Stack - 3K, supervisor mode */
MEM_STACK       { TYPE(RAM) START(0xFF901400) END(0xFF901FFF) WIDTH(8) }
/* Sysstack - 5K supervisor mode */
MEM_SYSSTACK    { TYPE(RAM) START(0xFF900000) END(0xFF9013FF) WIDTH(8) }
MEM_PCI_IO      { TYPE(RAM) START(0xFF807F00) END(0xFF807FFF) WIDTH(8) }
MEM_ARGV        { TYPE(RAM) START(0xFF807E00) END(0xFF807EFF) WIDTH(8) }
MEM_HEAP        { TYPE(RAM) START(0xFF800000) END(0xFF807DFF) WIDTH(8) }
MEM_L1_SCRATCH  { TYPE(RAM) START(0xFFB00000) END(0xFFB00FFF) WIDTH(8) }
MEM_SDRAM 		{ TYPE(RAM) START(0x00000000) END(0x007FFFFF) WIDTH(8) }
}

PROCESSOR p0
{
    OUTPUT( $COMMAND_LINE_OUTPUT_FILE )

    SECTIONS
    {
        program_ram
        {
            INPUT_SECTION_ALIGN(4)
            INPUT_SECTIONS( $OBJECTS(program) $LIBRARIES(program))
            INPUT_SECTIONS( $OBJECTS(cplb) $LIBRARIES(cplb))
            INPUT_SECTIONS( $OBJECTS(cplb_code) $LIBRARIES(cplb_code))
            INPUT_SECTIONS( $OBJECTS(L1_code) $LIBRARIES(L1_code))
        } >MEM_PROGRAM_RAM
#ifdef MEMBSZ
        bsz
        {
        	INPUT_SECTION_ALIGN(4)
            INPUT_SECTIONS( $OBJECTS(bsz) $LIBRARIES(bsz))
        } >MEM_DATA
        bsz_init
        {
        	INPUT_SECTION_ALIGN(4)
            INPUT_SECTIONS( $OBJECTS(bsz_init) $LIBRARIES(bsz_init))
        } >MEM_DATA2
#endif


        data
        {
	    INPUT_SECTION_ALIGN(4)
            INPUT_SECTIONS($OBJECTS(data1) $LIBRARIES(data1))
            INPUT_SECTIONS( $OBJECTS(L1_data_a) $LIBRARIES(L1_data_a))
            INPUT_SECTIONS( $OBJECTS(L1_data_b) $LIBRARIES(L1_data_b))
        } >MEM_DATA
        
        sdram_mem
        {
	    INPUT_SECTION_ALIGN(4)
            INPUT_SECTIONS($OBJECTS(sdram_mem) $LIBRARIES(sdram_mem))
        } >MEM_SDRAM

        constdata
        {
	    INPUT_SECTION_ALIGN(4)
	    INPUT_SECTIONS($OBJECTS(constdata) $LIBRARIES(constdata))
        INPUT_SECTIONS( $OBJECTS(cplb_data) $LIBRARIES(cplb_data))
        } >MEM_DATA2

        voldata
        {
	    INPUT_SECTION_ALIGN(4)
	    INPUT_SECTIONS($OBJECTS(voldata) $LIBRARIES(voldata))
        } >MEM_L1_SCRATCH

	pci_io
	{
	    INPUT_SECTION_ALIGN(4)
	    INPUT_SECTIONS( $LIBRARIES(pci_io))
	} >MEM_PCI_IO

        stack
        {
            ldf_stack_space = .;
            ldf_stack_end = ldf_stack_space + MEMORY_SIZEOF(MEM_STACK);
        } >MEM_STACK

        sysstack
        {
            ldf_sysstack_space = .;
            ldf_sysstack_end = ldf_sysstack_space + MEMORY_SIZEOF(MEM_SYSSTACK);
        } >MEM_SYSSTACK

        heap
        {
            // Allocate a heap for the application
            ldf_heap_space = .;
            ldf_heap_end = ldf_heap_space + MEMORY_SIZEOF(MEM_HEAP) - 1;
            ldf_heap_length = ldf_heap_end - ldf_heap_space;        
        } >MEM_HEAP

        argv
        {
            // Allocate argv space for the application
            ldf_argv_space = .;
            ldf_argv_end = ldf_argv_space + MEMORY_SIZEOF(MEM_ARGV) - 1;
            ldf_argv_length = ldf_argv_end - ldf_argv_space;        
        } >MEM_ARGV
    }
}