----  Device: LXT971A--  Package: LQFP--  File Name: 971A_lqfp.bsdl----  Revision History--   1.0 - Tim Jackson (4/29/2002)--         Legacy file 971Alqfp.txt renamed to 971A_lqfp.bsdl.--         Updated attribute IDCODE_REGISTER to handle revision ids 1--         and 2 and their appropriate jedec continuation codes.--         Changed PWRDWN to a compliance enable and added a design--         warning to that effect.----  Notes--   This file has successfully compiled on the Agilent Technologies 3070--   BSDL compiler.--   --  Disclaimer--   Intel Corporation ("Intel") hereby grants the user of this BSDL file--   ("User") a non-exclusive, nontransferable license to use the file--   under the following terms.  User may only to use the BSDL file and--   is not granted rights to sell, copy (except as needed to run the BSDL--   file), rent, lease or sub-license the BSDL file in whole or in part,--   or in modified form to anyone. User may modify the BSDL file to suit--   its specific applications, but rights to derivative works and such--   modifications shall belong to Intel. This BSDL file is provided on an--   "AS IS" basis and Intel makes absolutely no warranty with respect to--   the information contained herein.  INTEL DISCLAIMS AND USER WAIVES--   ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF--   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ANY WARRANTY--   OF NON-INFRINGEMENT OF THE INTELLECTUAL PROPERTY RIGHTS OF ANY THIRD--   PARTY. THE ENTIRE RISK AS TO QUALITY AND PERFORMANCE IS WITH USER.--   ACCORDINGLY, IN NO EVENT SHALL INTEL BE LIABLE FOR ANY DIRECT OR--   INDIRECT DAMAGES, WHETHER IN CONTRACT OR TORT, INCLUDING, WITHOUT--   LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION, OR LOST INFORMATION)--   ARISING OUT OF THE USE OF OR INABILITY TO USE THE FILE, EVEN IF INTEL--   HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.----  This file is the legal property of Copyright (c) 2002, Intel--  Corporation. --entity shark is    generic (PHYSICAL_PIN_MAP : string := "LQFP64");        port (            GND    : linkage bit_vector (1 to 7);            VCCIO  : linkage bit_vector (1 to 2);            VCCA   : linkage bit_vector (1 to 2);            VCCD   : linkage bit                ;            NC     : linkage bit_vector (1 to 3);            XI     : linkage bit                ;            XO     : linkage bit                ;            MDDIS  : in      bit                ;            Reset  : in      bit                ;            TXSLEW0: in      bit                ;            TXSLEW1: in      bit                ;            ADDR0  : in      bit                ;            ADDR1  : in      bit                ;            ADDR2  : in      bit                ;            ADDR3  : in      bit                ;            ADDR4  : in      bit                ;            RBIAS  : linkage bit                ;            TPFOP  : linkage bit                ;            TPFON  : linkage bit                ;            TPFIP  : linkage bit                ;            TPFIN  : linkage bit                ;            SD_TP  : in      bit                ;            TDI    : in      bit                ;            TDO    : out     bit                ;            TMS    : in      bit                ;            TCK    : in      bit                ;            TRST   : in      bit                ;            SLEEP  : in      bit                ;            PAUSE  : in      bit                ;            TEST0  : in      bit                ;            TEST1  : in      bit                ;            LEDCFG2: inout   bit                ;            LEDCFG1: inout   bit                ;            LEDCFG0: inout   bit                ;            PWRDWN : in      bit                ;            MDIO   : inout   bit                ;            MDC    : in      bit                ;            RXD3   : out     bit                ;            RXD2   : out     bit                ;            RXD1   : out     bit                ;            RXD0   : out     bit                ;            RX_DV  : out     bit                ;            RX_CLK : out     bit                ;            RX_ER  : out     bit                ;            TX_ER  : in      bit                ;            TX_CLK : out     bit                ;            TX_EN  : in      bit                ;            TXD0   : in      bit                ;            TXD1   : in      bit                ;            TXD2   : in      bit                ;            TXD3   : in      bit                ;            COL    : out     bit                ;            CRS    : out     bit                ;            MDINT  : out     bit                     );        use STD_1149_1_1994.all;    use LXT971A_BSCAN.all;        attribute COMPONENT_CONFORMANCE of shark: entity is "STD_1149_1_1993";        -- Pin mappings                attribute PIN_MAP of shark: entity is PHYSICAL_PIN_MAP;                constant LQFP64: PIN_MAP_STRING:=            "GND    : (7,11,18,25,41,50,61),"&            "VCCIO  : (8,40)               ,"&            "VCCA   : (21,22)              ,"&            "VCCD   :  51                  ,"&            "NC     : (9,10,44)            ,"&            "XI     : 1                    ,"&            "XO     : 2                    ,"&            "MDDIS  : 3                    ,"&            "Reset  : 4                    ,"&            "TXSLEW0: 5                    ,"&            "TXSLEW1: 6                    ,"&            "ADDR0  : 12                   ,"&            "ADDR1  : 13                   ,"&            "ADDR2  : 14                   ,"&            "ADDR3  : 15                   ,"&            "ADDR4  : 16                   ,"&            "RBIAS  : 17                   ,"&            "TPFOP  : 19                   ,"&            "TPFON  : 20                   ,"&            "TPFIP  : 23                   ,"&            "TPFIN  : 24                   ,"&            "SD_TP  : 26                   ,"&            "TDI    : 27                   ,"&            "TDO    : 28                   ,"&            "TMS    : 29                   ,"&            "TCK    : 30                   ,"&            "TRST   : 31                   ,"&            "SLEEP  : 32                   ,"&            "PAUSE  : 33                   ,"&            "TEST0  : 34                   ,"&            "TEST1  : 35                   ,"&            "LEDCFG2: 36                   ,"&            "LEDCFG1: 37                   ,"&            "LEDCFG0: 38                   ,"&            "PWRDWN : 39                   ,"&            "MDIO   : 42                   ,"&            "MDC    : 43                   ,"&            "RXD3   : 45                   ,"&            "RXD2   : 46                   ,"&            "RXD1   : 47                   ,"&            "RXD0   : 48                   ,"&            "RX_DV  : 49                   ,"&            "RX_CLK : 52                   ,"&            "RX_ER  : 53                   ,"&            "TX_ER  : 54                   ,"&            "TX_CLK : 55                   ,"&            "TX_EN  : 56                   ,"&            "TXD0   : 57                   ,"&            "TXD1   : 58                   ,"&            "TXD2   : 59                   ,"&            "TXD3   : 60                   ,"&            "COL    : 62                   ,"&            "CRS    : 63                   ,"&            "MDINT  : 64                    ";                    -- IEEE 1149.1 pin definition        attribute TAP_SCAN_RESET of TRST : signal is true;        attribute TAP_SCAN_IN    of TDI  : signal is true;        attribute TAP_SCAN_MODE  of TMS  : signal is true;        attribute TAP_SCAN_OUT   of TDO  : signal is true;        attribute TAP_SCAN_CLOCK of TCK  : signal is (10.0e6, BOTH);    -- IEEE 1149.1 compliance enable        attribute COMPLIANCE_PATTERNS of shark: entity is          "(PWRDWN) (0)";        -- IEEE 1149.1 definition for LV Software TAP        attribute INSTRUCTION_LENGTH of shark: entity is 16;                attribute INSTRUCTION_OPCODE of shark: entity is            "IDCODE   (1111111111111110)," &            "BYPASS   (1111111111111111)," &            "EXTEST   (0000000000000000,1111111111101000)," &            "SAMPLE   (1111111111111000)," &            "HIGHZ    (1111111111001111)," &            "CLAMP    (1111111111101111)"  ;        attribute INSTRUCTION_CAPTURE of shark: entity is "xxxxxxxxxxxxxx01";                attribute IDCODE_REGISTER of shark: entity is            "0001"               & -- revision id 1            "0000001111001011"   & -- part number            "11101111110"        & -- manufacturer's ID            "1,"                 & -- required by 1149.1            "0010"               & -- revision id 2            "0000001111001011"   & -- part number            "00001111110"        & -- manufacturer's ID            "1";                   -- required by 1149.1         attribute REGISTER_ACCESS of shark: entity is            "BYPASS   (HIGHZ, CLAMP) " ; --Boundary scan definition attribute BOUNDARY_LENGTH of shark: entity is 40; attribute BOUNDARY_REGISTER of shark: entity is  -- num  cell     port      function   safe  [ccell disval rslt] "   0   (BC_2    , MDDIS   , input    , X )                    ,"& "   1   (BC_2    , Reset   , input    , X )                    ,"& "   2   (BC_2    , TXSLEW0 , input    , X )                    ,"& "   3   (BC_2    , TXSLEW1 , input    , X )                    ,"& "   4   (BC_2    , ADDR0   , input    , X )                    ,"& "   5   (BC_2    , ADDR1   , input    , X )                    ,"& "   6   (BC_2    , ADDR2   , input    , X )                    ,"& "   7   (BC_2    , ADDR3   , input    , X )                    ,"& "   8   (BC_2    , ADDR4   , input    , X )                    ,"& "   9   (BC_2    , SD_TP   , input    , X )                    ,"& "  10   (BC_2    , SLEEP   , input    , X )                    ,"& "  11   (BC_2    , PAUSE   , input    , X )                    ,"& "  12   (BC_2    , TEST0   , input    , X )                    ,"& "  13   (BC_2    , TEST1   , input    , X )                    ,"& "  14   (BC_2    , *       , control  , 1 )                    ,"& "  15   (LV_BC_7 , LEDCFG2 , bidir    , X  ,  14   , 1  , Z   ),"& "  16   (LV_BC_7 , LEDCFG1 , bidir    , X  ,  14   , 1  , Z   ),"& "  17   (LV_BC_7 , LEDCFG0 , bidir    , X  ,  14   , 1  , Z   ),"& "  18   (BC_2    , *       , internal , 0 )                    ,"& "  19   (LV_BC_7 , MDIO    , bidir    , X  ,  14   , 1  , Z   ),"& "  20   (BC_2    , MDC     , input    , X )                    ,"& "  21   (BC_2    , *       , internal , X )                    ,"& "  22   (BC_2    , RXD3    , output3  , X  ,  14   , 1  , Z   ),"& "  23   (BC_2    , RXD2    , output3  , X  ,  14   , 1  , Z   ),"& "  24   (BC_2    , RXD1    , output3  , X  ,  14   , 1  , Z   ),"& "  25   (BC_2    , RXD0    , output3  , X  ,  14   , 1  , Z   ),"& "  26   (BC_2    , RX_DV   , output3  , X  ,  14   , 1  , Z   ),"& "  27   (BC_2    , RX_CLK  , output3  , X  ,  14   , 1  , Z   ),"& "  28   (BC_2    , RX_ER   , output3  , X  ,  14   , 1  , Z   ),"& "  29   (BC_2    , TX_ER   , input    , X )                    ,"& "  30   (BC_2    , TX_CLK  , output3  , X  ,  14   , 1  , Z   ),"& "  31   (BC_2    , TX_EN   , input    , X )                    ,"& "  32   (BC_2    , TXD0    , input    , X )                    ,"& "  33   (BC_2    , TXD1    , input    , X )                    ,"& "  34   (BC_2    , TXD2    , input    , X )                    ,"& "  35   (BC_2    , TXD3    , input    , X )                    ,"& "  36   (BC_2    , *       , internal , 0 )                    ,"& "  37   (BC_2    , COL     , output3  , X  ,  14   , 1  , Z   ),"& "  38   (BC_2    , CRS     , output3  , X  ,  14   , 1  , Z   ),"& "  39   (BC_2    , MDINT   , output3  , X  ,  14   , 1  , Z   ) ";-- 1149.1 Design Warnings   attribute DESIGN_WARNING of shark: entity is     "PWRDWN pin should be kept low to allow proper operation" &     "of TAP circuitry.  There is a compliance enable on this" &     "pin to force the safe value.  The boundary scan cell" &     "associated with the PWRDWN pin has been changed to an" &     "internal pin.  It is cell number 18 in the boundary scan" &     "register description and has a safe value of 0 specified";end shark;