;/***************************************************************************
; * This code and information is provided "as is" without warranty of any   *
; * kind, either expressed or implied, including but not limited to the     *
; * implied warranties of merchantability and/or fitness for a particular   *
; * purpose.                                                                *
; *                                                                         *
; * Copyright (C) 2005 Teridian Semiconductor Corp. All Rights Reserved.    *
; ***************************************************************************/
;//**************************************************************************
;//    
;//  DESCRIPTION: 71M651x POWER METER - STARTUP Code.
;// 
;//  AUTHOR:  Keil Software, Inc.
;//
;//  HISTORY: See end of file
;//
;//**************************************************************************
;//               
;// File: STARTUP.A51
;//               
$NOMOD51
;------------------------------------------------------------------------------
;  This file is part of the C51 Compiler package
;  Copyright (c) 1988-2002 Keil Elektronik GmbH and Keil Software, Inc.
;------------------------------------------------------------------------------
;  STARTUP.A51:  This code is executed after processor reset.
;
;  To translate this file use A51 with the following invocation:
;
;     A51 STARTUP.A51
;
;  To link the modified STARTUP.OBJ file to your application use the following
;  BL51 invocation:
;
;     BL51 <your object file list>, STARTUP.OBJ <controls>
;
;------------------------------------------------------------------------------
;
;  User-defined Power-On Initialization of Memory
;
;  With the following EQU statements the initialization of memory
;  at processor reset can be defined:
;
;               ; the absolute start-address of IDATA memory is always 0
IDATALEN        EQU     100H    ; the length of IDATA memory in bytes.
;
XDATASTART      EQU     0H      ; the absolute start-address of XDATA memory
XDATALEN        EQU     000H    ; the length of XDATA memory in bytes.
;
PDATASTART      EQU     0H      ; the absolute start-address of PDATA memory
PDATALEN        EQU     0H      ; the length of PDATA memory in bytes.
;
;  Notes:  The IDATA space overlaps physically the DATA and BIT areas of the
;          8051 CPU. At minimum the memory space occupied from the C51 
;          run-time routines must be set to zero.
;------------------------------------------------------------------------------
;
;  Reentrant Stack Initilization
;
;  The following EQU statements define the stack pointer for reentrant
;  functions and initialized it:
;
;  Stack Space for reentrant functions in the SMALL model.
IBPSTACK        EQU     1       ; set to 1 if small reentrant is used.
IBPSTACKTOP     EQU     0FFH+1  ; set top of stack to highest location+1.
;
;  Stack Space for reentrant functions in the LARGE model.      
XBPSTACK        EQU     0       ; set to 1 if large reentrant is used.
XBPSTACKTOP     EQU     07FFH+1; set top of stack to highest location+1.
;
;  Stack Space for reentrant functions in the COMPACT model.    
PBPSTACK        EQU     0       ; set to 1 if compact reentrant is used.
PBPSTACKTOP     EQU     07FFH+1; set top of stack to highest location+1.
;
;------------------------------------------------------------------------------
;
;  Page Definition for Using the Compact Model with 64 KByte xdata RAM
;
;  The following EQU statements define the xdata page used for pdata
;  variables. The EQU PPAGE must conform with the PPAGE control used
;  in the linker invocation.
;
PPAGEENABLE     EQU     1       ; set to 1 if pdata object are used.
;
PPAGE           EQU     7       ; define PPAGE number.
;
PPAGE_SFR       DATA    0BFH    ; SFR that supplies uppermost address byte
;               (most 8051 variants use P2 as uppermost address byte)
;
;------------------------------------------------------------------------------
; Standard SFR Symbols 
ACC     DATA    0E0H
B       DATA    0F0H
SP      DATA    81H
DPL     DATA    82H
DPH     DATA    83H
USER1   DATA    90H
DIR1    DATA    91H

                NAME    ?C_STARTUP


?C_C51STARTUP   SEGMENT   CODE
?STACK          SEGMENT   IDATA

                RSEG    ?STACK
                DS      1

                EXTRN CODE (?C_START)
                PUBLIC  ?C_STARTUP

                CSEG    AT      0400h
?C_STARTUP:     LJMP    STARTUP1

                RSEG    ?C_C51STARTUP

STARTUP1:
                CLR     0xA8^7          ; Disable interrupts
                MOV     0B2h,#40h       ; Set security bit.
                MOV     0E8h,#0FFh      ; Refresh nonmaskable watchdog.

IF IDATALEN <> 0
                MOV     R0,#IDATALEN - 1
                CLR     A
IDATALOOP:      MOV     @R0,A
                DJNZ    R0,IDATALOOP
ENDIF

IF XDATALEN <> 0
                MOV     DPTR,#XDATASTART
                MOV     R7,#LOW (XDATALEN)
  IF (LOW (XDATALEN)) <> 0
                MOV     R6,#(HIGH (XDATALEN)) +1
  ELSE
                MOV     R6,#HIGH (XDATALEN)
  ENDIF
                CLR     A
XDATALOOP:      MOVX    @DPTR,A
                INC     DPTR
                DJNZ    R7,XDATALOOP
                DJNZ    R6,XDATALOOP
ENDIF

IF PPAGEENABLE <> 0
                MOV     PPAGE_SFR,#PPAGE
ENDIF

IF PDATALEN <> 0
                MOV     R0,#LOW (PDATASTART)
                MOV     R7,#LOW (PDATALEN)
                CLR     A
PDATALOOP:      MOVX    @R0,A
                INC     R0
                DJNZ    R7,PDATALOOP
ENDIF

IF IBPSTACK <> 0
EXTRN DATA (?C_IBP)

                MOV     ?C_IBP,#LOW IBPSTACKTOP
ENDIF

IF XBPSTACK <> 0
EXTRN DATA (?C_XBP)

                MOV     ?C_XBP,#HIGH XBPSTACKTOP
                MOV     ?C_XBP+1,#LOW XBPSTACKTOP
ENDIF

IF PBPSTACK <> 0
EXTRN DATA (?C_PBP)
                MOV     ?C_PBP,#LOW PBPSTACKTOP
ENDIF

                MOV     SP,#?STACK-1
; This code is required if you use L51_BANK.A51 with Banking Mode 4
; EXTRN CODE (?B_SWITCH0)
;               CALL    ?B_SWITCH0      ; init bank mechanism to code bank 0
                LJMP    ?C_START

                END

;/***************************************************************************
; * History:
; * $Log: STARTUP_BOOT_SECURE.A51,v $
; * Revision 1.2  2006/03/09 02:27:54  gmikef
; * Moved "onek_c" out of boot space.
; *
; * Revision 1.1  2006/02/08 22:55:49  gmikef
; * *** empty log message ***
; *
; * Revision 1.8  2006/01/10 04:11:17  gmikef
; * Added PDATA support for CE Outputs.
; *
; * Revision 1.7  2005/09/22 23:45:24  tvander
; * Clean build all models and unit tests, updated copyright to be fore Teridian
; *
; * Revision 1.6  2005/08/10 02:04:59  gmikef
; * *** empty log message ***
; *
; * Revision 1.5  2005/04/30 02:16:31  gmikef
; * *** empty log message ***
; *
; * Revision 1.4  2005/04/28 19:12:25  tvander
; * Comments only!  Restored history comments.
; *
; * Revision 1.3  2005/04/27 23:44:50  gmikef
; * Some MATH rountines now use 'idata'.
; * Added MATH_FAST flag to 'options.h".
; * Changed "6521B.Uv2" to max optimization.
; *
; * Revision 1.2  2005/03/24 21:43:57  gmikef
; * *** empty log message ***
; *
; * Revision 1.2  2005/03/23 21:53:24  gmikef
; * *** empty log message ***
; *
; * Revision 1.1  2005/03/23 21:19:48  gmikef
; * *** empty log message ***
; *
; * Revision 1.1  2005/03/23 18:13:55  tvander
; * *** empty log message ***
; *
; * Revision 1.1  2005/03/11 22:17:23  tvander
; * Structure
; *
; * Revision 1.5  2005/03/08 19:06:43  tvander
; * Self calibration in all software models
; *
; * Revision 1.3  2005/02/17 18:32:29  tvander
; * Added automatic check-in logging to all source code.
; *
; * Copyright (C) 2005 Teridian Semiconductor Corp. All Rights Reserved.    *
; * this program is fully protected by the United States copyright          *
; * laws and is the property of Teridian Semiconductor Corporation.         *
; ***************************************************************************/