?? videogenerator.tcl
字號:
return
}
}
if [runCmd "\"$fpga_bin/map\" -a mg5g00 -p LFXP3C -t PQFP208 -s 3 \"videogenerator.ngd\" -o \"videogenerator_map.ncd\" -mp \"videogenerator.mrp\" \"videogenerator.lpf\""] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
if [catch {open videogenerator.cm2 w} rspFile] {
puts stderr "Cannot create response file videogenerator.cm2: $rspFile"
} else {
puts $rspFile "-t videogenerator.mt
-to videogenerator.tw1
-o videogenerator.tcm
-log videogenerator.log
-pr videogenerator.prf
-rpt videogenerator.mrp
"
close $rspFile
}
if [runCmd "\"$cpld_bin/checkpoint\" -m -f \"videogenerator.cmm\" -f \"videogenerator.cm2\" -arch mg5g00 \"videogenerator_map.ncd\""] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
file delete videogenerator.cm2
if [catch {open videogenerator.p2t w} rspFile] {
puts stderr "Cannot create response file videogenerator.p2t: $rspFile"
} else {
puts $rspFile "-w
-i 6
-l 5
-n 1
-t 1
-s 1
-c 0
-e 0
-exp parPlcInLimit=0
-exp parPlcInNeighborSize=1
-exp parPathBased=OFF
-exp parHold=OFF
"
close $rspFile
}
if [catch {open videogenerator.p3t w} rspFile] {
puts stderr "Cannot create response file videogenerator.p3t: $rspFile"
} else {
puts $rspFile "-rem
-log videogenerator.log
-o videogenerator_mp.par
-pr videogenerator.prf
"
close $rspFile
}
if [runCmd "\"$cpld_bin/multipar\" -p videogenerator.p2t -f \"videogenerator.p3t\" \"videogenerator_map.ncd\" \"videogenerator.ncd\""] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
if [catch {open videogenerator.cm2 w} rspFile] {
puts stderr "Cannot create response file videogenerator.cm2: $rspFile"
} else {
puts $rspFile "-t videogenerator.pt
-to videogenerator.twr
-o videogenerator.tcp
-log videogenerator.log
-pr videogenerator.prf
-rpt videogenerator.par
"
close $rspFile
}
if [runCmd "\"$cpld_bin/checkpoint\" -p -f \"videogenerator.cmp\" -f \"videogenerator.cm2\" -arch mg5g00 \"videogenerator.ncd\" -l 60"] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
file delete videogenerator.cm2
if [catch {open videogenerator.t2b w} rspFile] {
puts stderr "Cannot create response file videogenerator.t2b: $rspFile"
} else {
puts $rspFile "-g CfgMode:Disable
-g ReadBack:Flash
-g ReadCapture:Disable
-g RamCfg:Reset
-g ES:No
"
close $rspFile
}
if [runCmd "\"$fpga_bin/bitgen\" -f \"videogenerator.t2b\" -w \"videogenerator.ncd\" \"videogenerator.prf\""] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
if [runCmd "\"$cpld_bin/synsvf\" -exe \"$install_dir/ispvmsystem/ispufw\" -prj videogenerator -if videogenerator.bit -log videogenerator.prm -b2j -optoft -jed -of videogenerator.jed -comment videogenerator.alt "] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
########## Tcl recorder end at 06/14/07 21:53:19 ###########
########## Tcl recorder starts at 06/14/07 22:42:22 ##########
# Commands to make the Process:
# Hierarchy
if [runCmd "\"$cpld_bin/vhd2jhd\" \"videogenerator.vhd\" -o \"videogenerator.jhd\" -m \"$install_dir/ispcpld/generic/lib/vhd/location.map\" -p \"$install_dir/ispcpld/generic/lib\""] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
########## Tcl recorder end at 06/14/07 22:42:22 ###########
########## Tcl recorder starts at 06/14/07 22:42:27 ##########
# Commands to make the Process:
# Synplify Synthesize VHDL File
if [catch {open VideoGenerator.cmd w} rspFile] {
puts stderr "Cannot create response file VideoGenerator.cmd: $rspFile"
} else {
puts $rspFile "STYFILENAME: videogenerator.sty
PROJECT: VideoGenerator
WORKING_PATH: \"$proj_dir\"
MODULE: VideoGenerator
VHDL_FILE_LIST: \"$install_dir/ispcpld/../cae_library/synthesis/vhdl/XP.vhd\" videogenerator.vhd
OUTPUT_FILE_NAME: VideoGenerator
SUFFIX_NAME: edi
WRITE_PRF: false
FREQUENCY: 200
FANOUT_LIMIT: 100
DISABLE_IO_INSERTION: false
FORCE_GSR: auto
SPEED_GRADE: -3
SYMBOLIC_FSM_COMPILER: true
NUM_CRITICAL_PATHS: 3
AUTO_CONSTRAIN_IO: true
NUM_STARTEND_POINTS: 0
"
close $rspFile
}
if [runCmd "\"$cpld_bin/Synpwrap\" -e VideoGenerator -target LATTICE-XP -part LFXP3C"] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
file delete VideoGenerator.cmd
########## Tcl recorder end at 06/14/07 22:42:27 ###########
########## Tcl recorder starts at 06/14/07 22:43:01 ##########
# Commands to make the Process:
# Hierarchy
if [runCmd "\"$cpld_bin/vhd2jhd\" \"videogenerator.vhd\" -o \"videogenerator.jhd\" -m \"$install_dir/ispcpld/generic/lib/vhd/location.map\" -p \"$install_dir/ispcpld/generic/lib\""] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
########## Tcl recorder end at 06/14/07 22:43:01 ###########
########## Tcl recorder starts at 06/14/07 22:43:01 ##########
# Commands to make the Process:
# Synplify Synthesize VHDL File
if [catch {open VideoGenerator.cmd w} rspFile] {
puts stderr "Cannot create response file VideoGenerator.cmd: $rspFile"
} else {
puts $rspFile "STYFILENAME: videogenerator.sty
PROJECT: VideoGenerator
WORKING_PATH: \"$proj_dir\"
MODULE: VideoGenerator
VHDL_FILE_LIST: \"$install_dir/ispcpld/../cae_library/synthesis/vhdl/XP.vhd\" videogenerator.vhd
OUTPUT_FILE_NAME: VideoGenerator
SUFFIX_NAME: edi
WRITE_PRF: false
FREQUENCY: 200
FANOUT_LIMIT: 100
DISABLE_IO_INSERTION: false
FORCE_GSR: auto
SPEED_GRADE: -3
SYMBOLIC_FSM_COMPILER: true
NUM_CRITICAL_PATHS: 3
AUTO_CONSTRAIN_IO: true
NUM_STARTEND_POINTS: 0
"
close $rspFile
}
if [runCmd "\"$cpld_bin/Synpwrap\" -e VideoGenerator -target LATTICE-XP -part LFXP3C"] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
file delete VideoGenerator.cmd
########## Tcl recorder end at 06/14/07 22:43:01 ###########
########## Tcl recorder starts at 06/14/07 22:43:36 ##########
# Commands to make the Process:
# Hierarchy
if [runCmd "\"$cpld_bin/vhd2jhd\" \"videogenerator.vhd\" -o \"videogenerator.jhd\" -m \"$install_dir/ispcpld/generic/lib/vhd/location.map\" -p \"$install_dir/ispcpld/generic/lib\""] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
########## Tcl recorder end at 06/14/07 22:43:36 ###########
########## Tcl recorder starts at 06/14/07 22:43:37 ##########
# Commands to make the Process:
# Synplify Synthesize VHDL File
if [catch {open VideoGenerator.cmd w} rspFile] {
puts stderr "Cannot create response file VideoGenerator.cmd: $rspFile"
} else {
puts $rspFile "STYFILENAME: videogenerator.sty
PROJECT: VideoGenerator
WORKING_PATH: \"$proj_dir\"
MODULE: VideoGenerator
VHDL_FILE_LIST: \"$install_dir/ispcpld/../cae_library/synthesis/vhdl/XP.vhd\" videogenerator.vhd
OUTPUT_FILE_NAME: VideoGenerator
SUFFIX_NAME: edi
WRITE_PRF: false
FREQUENCY: 200
FANOUT_LIMIT: 100
DISABLE_IO_INSERTION: false
FORCE_GSR: auto
SPEED_GRADE: -3
SYMBOLIC_FSM_COMPILER: true
NUM_CRITICAL_PATHS: 3
AUTO_CONSTRAIN_IO: true
NUM_STARTEND_POINTS: 0
"
close $rspFile
}
if [runCmd "\"$cpld_bin/Synpwrap\" -e VideoGenerator -target LATTICE-XP -part LFXP3C"] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
file delete VideoGenerator.cmd
########## Tcl recorder end at 06/14/07 22:43:37 ###########
########## Tcl recorder starts at 06/14/07 22:49:34 ##########
# Commands to make the Process:
# Hierarchy
if [runCmd "\"$cpld_bin/vhd2jhd\" \"videogenerator.vhd\" -o \"videogenerator.jhd\" -m \"$install_dir/ispcpld/generic/lib/vhd/location.map\" -p \"$install_dir/ispcpld/generic/lib\""] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
########## Tcl recorder end at 06/14/07 22:49:34 ###########
########## Tcl recorder starts at 06/14/07 22:49:34 ##########
# Commands to make the Process:
# Synplify Report
if [catch {open VideoGenerator.cmd w} rspFile] {
puts stderr "Cannot create response file VideoGenerator.cmd: $rspFile"
} else {
puts $rspFile "STYFILENAME: videogenerator.sty
PROJECT: VideoGenerator
WORKING_PATH: \"$proj_dir\"
MODULE: VideoGenerator
VHDL_FILE_LIST: \"$install_dir/ispcpld/../cae_library/synthesis/vhdl/XP.vhd\" videogenerator.vhd
OUTPUT_FILE_NAME: VideoGenerator
SUFFIX_NAME: edi
WRITE_PRF: false
FREQUENCY: 200
FANOUT_LIMIT: 100
DISABLE_IO_INSERTION: false
FORCE_GSR: auto
SPEED_GRADE: -3
SYMBOLIC_FSM_COMPILER: true
NUM_CRITICAL_PATHS: 3
AUTO_CONSTRAIN_IO: true
NUM_STARTEND_POINTS: 0
"
close $rspFile
}
if [runCmd "\"$cpld_bin/Synpwrap\" -e VideoGenerator -target LATTICE-XP -part LFXP3C"] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
file delete VideoGenerator.cmd
########## Tcl recorder end at 06/14/07 22:49:34 ###########
########## Tcl recorder starts at 06/14/07 22:49:55 ##########
# Commands to make the Process:
# Synplify Synthesize VHDL File
if [catch {open VideoGenerator.cmd w} rspFile] {
puts stderr "Cannot create response file VideoGenerator.cmd: $rspFile"
} else {
puts $rspFile "STYFILENAME: videogenerator.sty
PROJECT: VideoGenerator
WORKING_PATH: \"$proj_dir\"
MODULE: VideoGenerator
VHDL_FILE_LIST: \"$install_dir/ispcpld/../cae_library/synthesis/vhdl/XP.vhd\" videogenerator.vhd
OUTPUT_FILE_NAME: VideoGenerator
SUFFIX_NAME: edi
WRITE_PRF: false
FREQUENCY: 200
FANOUT_LIMIT: 100
DISABLE_IO_INSERTION: false
FORCE_GSR: auto
SPEED_GRADE: -3
SYMBOLIC_FSM_COMPILER: true
NUM_CRITICAL_PATHS: 3
AUTO_CONSTRAIN_IO: true
NUM_STARTEND_POINTS: 0
"
close $rspFile
}
if [runCmd "\"$cpld_bin/Synpwrap\" -e VideoGenerator -target LATTICE-XP -part LFXP3C"] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
file delete VideoGenerator.cmd
########## Tcl recorder end at 06/14/07 22:49:55 ###########
########## Tcl recorder starts at 06/14/07 22:50:27 ##########
# Commands to make the Process:
# Hierarchy
if [runCmd "\"$cpld_bin/vhd2jhd\" \"videogenerator.vhd\" -o \"videogenerator.jhd\" -m \"$install_dir/ispcpld/generic/lib/vhd/location.map\" -p \"$install_dir/ispcpld/generic/lib\""] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
########## Tcl recorder end at 06/14/07 22:50:27 ###########
########## Tcl recorder starts at 06/14/07 22:50:27 ##########
# Commands to make the Process:
# Synplify Synthesize VHDL File
if [catch {open VideoGenerator.cmd w} rspFile] {
puts stderr "Cannot create response file VideoGenerator.cmd: $rspFile"
} else {
puts $rspFile "STYFILENAME: videogenerator.sty
PROJECT: VideoGenerator
WORKING_PATH: \"$proj_dir\"
MODULE: VideoGenerator
VHDL_FILE_LIST: \"$install_dir/ispcpld/../cae_library/synthesis/vhdl/XP.vhd\" videogenerator.vhd
OUTPUT_FILE_NAME: VideoGenerator
SUFFIX_NAME: edi
WRITE_PRF: false
FREQUENCY: 200
FANOUT_LIMIT: 100
DISABLE_IO_INSERTION: false
FORCE_GSR: auto
SPEED_GRADE: -3
SYMBOLIC_FSM_COMPILER: true
NUM_CRITICAL_PATHS: 3
AUTO_CONSTRAIN_IO: true
NUM_STARTEND_POINTS: 0
"
close $rspFile
}
if [runCmd "\"$cpld_bin/Synpwrap\" -e VideoGenerator -target LATTICE-XP -part LFXP3C"] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
file delete VideoGenerator.cmd
########## Tcl recorder end at 06/14/07 22:50:27 ###########
########## Tcl recorder starts at 06/14/07 22:51:37 ##########
# Commands to make the Process:
# Hierarchy
if [runCmd "\"$cpld_bin/vhd2jhd\" \"videogenerator.vhd\" -o \"videogenerator.jhd\" -m \"$install_dir/ispcpld/generic/lib/vhd/location.map\" -p \"$install_dir/ispcpld/generic/lib\""] {
return
} else {
vwait done
if [checkResult $done] {
return
}
}
########## Tcl recorder end at 06/14/07 22:51:37 ###########
########## Tcl recorder starts at 06/14/07 22:51:37 ##########
# Commands to make the Process:
# Synplify Synthesize VHDL File
if [catch {open VideoGenerator.cmd w} rspFile] {
puts stderr "Cannot create response file VideoGenerator.cmd: $rspFile"
} else {
puts $rspFile "STYFILENAME: videogenerator.sty
PROJECT: VideoGenerator
WORKING_PATH: \"$proj_dir\"
MODULE: VideoGenerator
VHDL_FILE_LIST: \"$install_dir/ispcpld/../cae_library/synthesis/vhdl/XP.vhd\" videogenerator.vhd
OUTPUT_FILE_NAME: VideoGenerator
SUFFIX_NAME: edi
WRITE_PRF: false
FREQUENCY: 200
FANOUT_LIMIT: 100
DISABLE_IO_INSERTION: false
FORCE_GSR: auto
SPEED_GRADE: -3
SYMBOLIC_FSM_COMPILER: true
NUM_CRITICAL_PATHS: 3
AUTO_CONSTRAIN_IO: true
NUM_STARTEND_POINTS: 0
"
close $rspFile
}
if [runCmd "\"$cpld_bi?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -