<!--
This XML file (created on Sat Oct 20 10:16:11 2007) contains limited information
from the compilation of logic designs using Quartus II software (BUT NOT THE
LOGIC DESIGN FILES) that will be transmitted to Altera Corporation through
operation of the "TalkBack" feature.  To enable/disable this feature, run
qtb_install.exe located in your quartus/bin folder.  For more information, go
to license.txt.
-->
<talkback>
<ver>7.1</ver>
<schema>quartus_version_7.1_build_156.xsd</schema>
<license>
	<host_id>000475a7c517</host_id>
	<nic_id>000475a7c517</nic_id>
	<cdrive_id>dcec3435</cdrive_id>
</license>
<tool>
	<name>Quartus II</name>
	<version>7.1</version>
	<build>Build 156</build>
	<binary_type>32</binary_type>
	<module>quartus_asm</module>
	<edition>Full Version</edition>
	<eval>Licensed</eval>
	<compilation_end_time>Sat Oct 20 10:16:11 2007</compilation_end_time>
</tool>
<machine>
	<os>Windows XP</os>
	<cpu>
		<proc_count>1</proc_count>
		<cpu_freq units="MHz">1800</cpu_freq>
	</cpu>
	<ram units="MB">768</ram>
</machine>
<project>E:/mywork/new_pwm/new_pwm</project>
<revision>new_pwm</revision>
<compilation_summary>
	<flow_status>Successful - Sat Oct 20 10:16:11 2007</flow_status>
	<quartus_ii_version>7.1 Build 156 04/30/2007 SJ Full Version</quartus_ii_version>
	<revision_name>new_pwm</revision_name>
	<top_level_entity_name>new_pwm</top_level_entity_name>
	<family>Cyclone II</family>
	<met_timing_requirements>N/A</met_timing_requirements>
	<total_logic_elements>43 / 4,608 ( &lt; 1 % )</total_logic_elements>
	<total_combinational_functions>31 / 4,608 ( &lt; 1 % )</total_combinational_functions>
	<dedicated_logic_registers>37 / 4,608 ( &lt; 1 % )</dedicated_logic_registers>
	<total_registers>37</total_registers>
	<total_pins>16 / 89 ( 18 % )</total_pins>
	<total_virtual_pins>0</total_virtual_pins>
	<total_memory_bits>0 / 119,808 ( 0 % )</total_memory_bits>
	<embedded_multiplier_9_bit_elements>0 / 26 ( 0 % )</embedded_multiplier_9_bit_elements>
	<total_plls>0 / 2 ( 0 % )</total_plls>
	<device>EP2C5T144C6</device>
	<timing_models>Final</timing_models>
</compilation_summary>
<mep_data>
	<command_line>quartus_asm --read_settings_files=off --write_settings_files=off new_pwm -c new_pwm</command_line>
</mep_data>
<software_data>
	<smart_recompile>off</smart_recompile>
</software_data>
<messages>
	<info>Info: Assembler is generating device programming files</info>
	<info>Info: Writing out detailed assembly data for power analysis</info>
	<info>Info: Command: quartus_asm --read_settings_files=off --write_settings_files=off new_pwm -c new_pwm</info>
	<info>Info: Running Quartus II Assembler</info>
	<info>Info: Processing started: Sat Oct 20 10:15:57 2007</info>
</messages>
<assembler_settings>
	<row>
		<option>Generate Serial Vector Format File (.svf) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate a JEDEC STAPL Format File (.jam) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate a compressed Jam STAPL Byte Code 2.0 File (.jbc) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate a compressed Jam STAPL Byte Code 2.0 File (.jbc) for Target Device</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Generate compressed bitstreams</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Compression mode</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Clock source for configuration device</option>
		<setting>Internal</setting>
		<default_value>Internal</default_value>
	</row>
	<row>
		<option>Clock frequency of the configuration device</option>
		<setting units="MHz">10</setting>
		<default_value units="MHz">10</default_value>
	</row>
	<row>
		<option>Divide clock frequency by</option>
		<setting>1</setting>
		<default_value>1</default_value>
	</row>
	<row>
		<option>JTAG user code for target device</option>
		<setting>Ffffffff</setting>
		<default_value>Ffffffff</default_value>
	</row>
	<row>
		<option>Auto user code</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Configuration device</option>
		<setting>Auto</setting>
		<default_value>Auto</default_value>
	</row>
	<row>
		<option>JTAG user code for configuration device</option>
		<setting>Ffffffff</setting>
		<default_value>Ffffffff</default_value>
	</row>
	<row>
		<option>Configuration device auto user code</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate Tabular Text File (.ttf) For Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate Raw Binary File (.rbf) For Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate Hexadecimal (Intel-Format) Output File (.hexout) for Target Device</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Hexadecimal Output File start address</option>
		<setting>0</setting>
		<default_value>0</default_value>
	</row>
	<row>
		<option>Hexadecimal Output File count direction</option>
		<setting>Up</setting>
		<default_value>Up</default_value>
	</row>
	<row>
		<option>Release clears before tri-states</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Auto-restart configuration after error</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Maintain Compatibility with All Cyclone II M4K Versions</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Use smart compilation</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
</assembler_settings>
</talkback>