}


/*********************************************************************

    Function:       ezSetDisplay

    Description:    Sets the display pattern

*********************************************************************/

void ezSetDisplay(u32 Display)  // sets the display
{

    u32 i;
    u32 Mask;

    // update the display
    LEDDisplay = Display & LEDEnables;

    // FOR (each LED)
    for (i = 0, Mask = 1; i < EZ_NUM_LEDS; i++, Mask <<= 1) {

        // IF (the LED should be lit)
        if (LEDDisplay & Mask) {

            // light it
#if defined(__ADSP_EDINBURGH__)
            *pFlashA_PortB_Out |= Mask;
#endif
#if defined(__ADSP_BRAEMAR__) || defined (__ADSP_TETON__) || defined (__ADSP_STIRLING__) || defined (__ADSP_MOAB__)
            adi_flag_Set(ezLEDToFlag[i]);
#endif

        // ELSE
        } else if (LEDEnables & Mask) {

            // dim it
#if defined(__ADSP_EDINBURGH__)
            *pFlashA_PortB_Out &= ~Mask;
#endif
#if defined(__ADSP_BRAEMAR__) || defined (__ADSP_TETON__)  || defined (__ADSP_STIRLING__) || defined (__ADSP_MOAB__)
            adi_flag_Clear(ezLEDToFlag[i]);
#endif

        // ENDIF
        }

    // ENDFOR
    }

}



/*********************************************************************

    Function:       ezInitButton

    Description:    Enables a button for use

*********************************************************************/

void ezInitButton(u32 Button) // enables a button
{

    // make sure the button is valid
    if (Button >= EZ_NUM_BUTTONS) return;

    // open the flag and make it an input
    adi_flag_Open(ezButtonToFlag[Button]);
    adi_flag_SetDirection(ezButtonToFlag[Button], ADI_FLAG_DIRECTION_INPUT);

}



/*********************************************************************

    Function:       ezIsButtonPushed

    Description:    Returns TRUE if a button has been pushed, FALSE otherwise.

*********************************************************************/

u32 ezIsButtonPushed(u32 Button)        // returns TRUE if button is pushed, FALSE otherwise
{
    u32 Value;

    // make sure the button is valid
    if (Button >= EZ_NUM_BUTTONS) return (FALSE);

    // sense it
    adi_flag_Sense(ezButtonToFlag[Button], &Value);

    // return
    return (Value);

}


/*********************************************************************

    Function:       ezClearButton

    Description:    Clears a push button latch.  This must be called to
                    reset the latch for the push button, if a button has
                    been pressed.

*********************************************************************/

void ezClearButton(u32 Button)  // clears a button latch
{
    volatile int i;

    // make sure the button is valid
    if (Button >= EZ_NUM_BUTTONS) return;

    // delay to allow for any debounce to clear
    ezDelay(10);

    // clear the flag corresponding to the button
    adi_flag_Clear(ezButtonToFlag[Button]);

}



/*********************************************************************

    Function:       ezDelay

    Description:    Delays for approximately 1 msec when running at 600 MHz

*********************************************************************/

void ezDelay(u32 msec) {

    volatile u32 i,j;

    // value of 0x3000000 is about 1 sec so 0xc49b is about 1msec
    for (j = 0; j < msec; j++) {
        for (i = 0; i < 0xc49b; i++) ;
    }

}



/*********************************************************************

    Function:       ezErrorCheck

    Description:    This function is intended to be used as a means to
                    quickly determine if a function has returned a non-zero
                    (hence an error) return code.  All driver and system
                    services functions return a value of zero for success and
                    a non-zero value when a failure occurs.  This function
                    makes all LEDs glow dimly when a non-zero value is
                    passed to it.

*********************************************************************/

void ezErrorCheck(u32 Result)               // lights all LEDS and spins on nonzero value
{
    while (Result != 0) {
        ezCycleLEDs();
    }
}


/*********************************************************************

    Function:       ezResetad1836

    Description:    This function is intended to be used to reset the AD1836 audio codec

*********************************************************************/
void ezReset1836(void)
{
  int             i;
  static unsigned char data;

#if defined (__ADSP_EDINBURGH__)
  *pFlashA_PortA_Dir = data = 0x01;

#if defined (__ADSP_EDINBURGH_AVEXTNDR__) || defined (__ADSPBF533_AVEXTNDR__)
  *pFlashA_PortA_Dir = data = 0x40;
#endif

  *pFlashA_PortA_Out = 0x00; //write to Port A to reset AD1836
  asm("nop; nop; nop;"); //wait at least 5 ns in reset
  *pFlashA_PortA_Out = data; //write to Port A to enable AD1836
#endif //__ADSP_EDINBURGH__

#if defined (__ADSP_BRAEMAR__)

#elif defined (__ADSP_BRAEMAR___AVEXTNDR__) || defined (__ADSPBF537_AVEXTNDR__)
  SlaveSelect = 6; //SPI Slave Select connected to 1836
  adi_flag_Open(ADI_FLAG_PF6);
  adi_flag_SetDirection(ADI_FLAG_PF6, ADI_FLAG_DIRECTION_OUTPUT);
  adi_flag_Clear(ADI_FLAG_PF6); //Clear PF6 to reset the AD1836
  asm("nop; nop; nop;"); //assert reset for at least 5 ns
  adi_flag_Set(ADI_FLAG_PF6); //Set PF6 to reset the AD1836
#endif //__ADSP_BRAEMAR__

#if defined (__ADSP_TETON__)
  adi_flag_Open(ADI_FLAG_PF15);
  adi_flag_SetDirection(ADI_FLAG_PF15, ADI_FLAG_DIRECTION_OUTPUT);
  adi_flag_Clear(ADI_FLAG_PF15); //Clear PF6 to reset the AD1836
  asm("nop; nop; nop;"); //Assert reset for at least 5 ns
  adi_flag_Set(ADI_FLAG_PF15); //Set PF6 to reset the AD1836
#endif //__ADSP_TETON__

  //Now wait 4500 MCLK periods (MCLK = 12.288 MHz) to recover from reset
  for (i=0; i<220000; i++) { asm("nop;"); } //Prevents compiler from optimizing
}


/*********************************************************************

    Function:       ezEnableVideoDecoder

    Description:    Connects up the bus, sets up the video clocking and
                    enables the AD7183.

*********************************************************************/

void ezEnableVideoDecoder(void)         // connects bus, sets up video clock and enables the 7183
{

#if defined(__ADSP_EDINBURGH__)         // ADSP-BF533 EZ-Kit specific info
#define ADV7183_OE_FLAG ADI_FLAG_PF2

    unsigned short tempReg;

    //The GPIOs of the flash are linked to the ADV7183 reset pin as well as to the
    //switch that drives the PPI clock. De-assert the ADV7183 reset and link the ADV7183
    //Clock "LLC1" to the Blackfin PPI clock input.  See EZ-KIT schematics for more details.
    tempReg = *pFlashA_PortA_Out;
	tempReg  &= ~RST_7171;	// disable 7171
    *pFlashA_PortA_Out = tempReg | RST_7183 | PPICLK_ADV7183_SELECT;

    //Setup the Blackfin PF registers
#if defined(__ADSP_EDINBURGH__) && (__SILICON_REVISION__==0xffff || __SILICON_REVISION__==0x1)
        tempReg = *pFIO_INEN;
        *pFIO_INEN = tempReg | ADV7183_OE_MASK;
#endif

    // open PF2 and PF13
    adi_flag_Open(ADI_FLAG_PF2);
    adi_flag_Open(ADI_FLAG_PF13);

    //Blackfin PF2 pin must be set as output
    adi_flag_SetDirection(ADI_FLAG_PF2, ADI_FLAG_DIRECTION_OUTPUT);

    //Set the Blackfin pin PF2 to output enable the ADV7183 data bus
    adi_flag_Clear(ADI_FLAG_PF2);

#endif // Edinburgh


#if defined(__ADSP_TETON__)

    volatile long delay_time;

    //Blackfin PF2 pin must be set as output
    adi_flag_SetDirection(ADI_FLAG_PF2, ADI_FLAG_DIRECTION_OUTPUT);

    //Blackfin PF13 pin must be set as output
    adi_flag_SetDirection(ADI_FLAG_PF13, ADI_FLAG_DIRECTION_OUTPUT);
    ssync();

    // set bit PF2 to disable ADV7183 outputs
    adi_flag_Set(ADI_FLAG_PF2);
    ssync();

    // clear bit PF13 to reset ADV7183
    adi_flag_Clear(ADI_FLAG_PF13);
    ssync();

    // set bit PF13 to re-enable ADV7183
    adi_flag_Set(ADI_FLAG_PF13);
    ssync();

    for (delay_time = 0; delay_time < ADV7183_Reset_Delay; delay_time++)
        asm("nop;");

    // clear bit to enable ADV7183 outputs
    adi_flag_Clear(ADI_FLAG_PF2);
    ssync();

    for (delay_time = 0; delay_time < ADV7183_Lock; delay_time++)
        asm("nop;");

#endif   // Teton

}

/*********************************************************************

    Function:       ezEnableVideoEncoder

    Description:    Enables the AD7171 or AD7179

*********************************************************************/

void ezEnableVideoEncoder(void)     // enables the 7171
{

#if defined(__ADSP_EDINBURGH__)         // ADSP-BF533 EZ-Kit specific info

	unsigned short tempReg;
	
	tempReg = *pFlashA_PortA_Out;
	tempReg  &= ~(RST_7183 | PPICLK_ADV7183_SELECT);	// disable 7183
	*pFlashA_PortA_Out = tempReg | RST_7171;

#endif // Edinburgh


#if defined(__ADSP_TETON__)

    // open PF14
    adi_flag_Open(ADI_FLAG_PF14);

    //Blackfin PF14 pin must be set as output
    adi_flag_SetDirection(ADI_FLAG_PF14, ADI_FLAG_DIRECTION_OUTPUT);
    ssync();

    // clear bit to reset ADV7179, Blackfin pin PF14
    adi_flag_Clear(ADI_FLAG_PF14);
    ssync();

    adi_flag_Set(ADI_FLAG_PF14);
    ssync();


#endif   // Teton

}


/*********************************************************************

    Function:   ezDisableVideoEncoder

    Description:    Disables the AD7179.

*********************************************************************/

void ezDisableVideoEncoder(void)
{

#if defined(__ADSP_EDINBURGH__)			// ADSP-BF533 EZ-Kit specific info

	unsigned short tempReg;
	
	tempReg = *pFlashA_PortA_Out;
	tempReg  &= ~(RST_7171);	// disable 7171
	*pFlashA_PortA_Out = tempReg;
	
#endif // Edinburgh
    
    
#if defined(__ADSP_TETON__)
    adi_flag_Clear(ADI_FLAG_PF14);

    // close PF14
    adi_flag_Close(ADI_FLAG_PF14);

    ssync();
#endif
}


/*********************************************************************

    Function:       ezDisableVideoDecoder

    Description:     Disables 7183
*********************************************************************/

void ezDisableVideoDecoder(void)
{

#if defined(__ADSP_EDINBURGH__)			// ADSP-BF533 EZ-Kit specific info

	// open PF2
	adi_flag_Open(ADI_FLAG_PF2);	
	//Blackfin PF2 pin must be set as output (PF2 is ADV7183 Output Enable)
	adi_flag_SetDirection(ADI_FLAG_PF2, ADI_FLAG_DIRECTION_OUTPUT);	
	//Set the Blackfin pin PF2 to disable ADV7183
	adi_flag_Set(ADI_FLAG_PF2);
	
#endif // Edinburgh

#if defined(__ADSP_TETON__)

    // set bit PF2 to disable ADV7183 outputs
    adi_flag_Set(ADI_FLAG_PF2);
    ssync();

    // clear bit PF13 to reset ADV7183
    adi_flag_Clear(ADI_FLAG_PF13);
    ssync();
#endif

    // close PF2 and PF13
    adi_flag_Close(ADI_FLAG_PF2);
    adi_flag_Close(ADI_FLAG_PF13);

}