The BTC CDemo demonstrates transfering data from the ADSP-21262 Ez-Kit Using C
over Background Telemetry Channels.  This is the most basic of demo programs.
The demo sets up a timer interrupt, and the timer ISR toggles the LED on the EZ-Kit.
During times when the interrupt is not being serviced, BTC transactions can occur.

Required Hardware:
1) ADSP-21262 Ez-Kit.
2) High Performance PCI Emulator, High Performance USB Emulator, or ADSP-21262 EZ-Kit using supplied USB debug agent.

Usage:
1) Make sure SW9.6 (LED_CS_SW) on the EZ-Kit is set to the OFF position in order for the LEDs to function properly.
2) Start the IDDE.
3) Select a HPPCI-ICE 21262 session (or HPUSB or EZ-Kit session)
4) Build and load the DSP program.
5) Open a BTC Memory Window (View->Debug Windows->BTC Memory)
6) Run the DSP Program.
7) Right-click on the BTC memory window and select "Auto Refresh"
8) In the BTC memory window, select a channel to view.