#ifndef _AD1835_H_
#define _AD1835_H_

//
//  AD1835.h
//
//  Configuration values for the AD1835A codec
//

#define DACCTRL1   	(0x0000)  // DAC control register 1    (R/W)
#define DACCTRL2   	(0x1000)  // DAC control register 2    (R/W)
#define DACVOL_L1   (0x2000)  // DAC volume - left 1       (R/W)
#define DACVOL_R1   (0x3000)  // DAC volume - right 1      (R/W)
#define DACVOL_L2   (0x4000)  // DAC volume - left 2       (R/W)
#define DACVOL_R2   (0x5000)  // DAC volume - right 2      (R/W)
#define DACVOL_L3   (0x6000)  // DAC volume - left 3       (R/W)
#define DACVOL_R3   (0x7000)  // DAC volume - right 3      (R/W)
#define DACVOL_L4   (0x8000)  // DAC volume - left 4       (R/W)
#define DACVOL_R4   (0x9000)  // DAC volume - right 4      (R/W)
#define ADCPEAKL   	(0xA000)  // ADC left peak              (R)
#define ADCPEAKR   	(0xB000)  // ADC right peak             (R)
#define ADCCTRL1   	(0xC000)  // ADC control 1             (R/W)
#define ADCCTRL2   	(0xD000)  // ADC control 2             (R/W)
#define ADCCTRL3   	(0xE000)  // ADC control 3             (R/W)

#define RD         	(0x0800)
#define WR         	(0x0000)  // Write to register


// DAC control register 1
#define DEEMPH44_1 	(0x0100)  // Deemphasis filter for 44.1 KHz
#define DEEMPH32   	(0x0200)  // Deemphasis filter for 32.0 KHz
#define DEEMPH48   	(0x0300)  // Deemphasis filter for 48.0 KHz

#define DACI2S     	(0x0000)  // DAC receives I2S format
#define DACRJ      	(0x0020)  // DAC receives I2S format
#define DACDSP     	(0x0040)  // DAC receives I2S format
#define DACLJ      	(0x0060)  // DAC receives I2S format
#define DACPACK256 	(0x0080)  // DAC receives I2S format

#define DAC24BIT   	(0x0000)  // 24-bit output word length
#define DAC20BIT   	(0x0008)  // 20-bit output word length
#define DAC16BIT   	(0x0010)  // 16-bit output word length

#define DACPOWERDN 	(0x0004)  // DAC into power-down mode

#define DACFS48    	(0x0000)  // Sample rate = 48 KHz (x8)
#define DACFS96    	(0x0001)  // Sample rate = 96 KHz (x4)
#define DACFS192   	(0x0002)  // Sample rate = 192 KHz (x2)


// DAC control register 2

#define DACREPLICATE  (0x0100)  // Replicate output of DAC 1/2 on 3/4, 5/6 & 7/8
#define DACMUTE_R4    (0x0080)  // Mute DAC output channel (clear to un-mute)
#define DACMUTE_L4    (0x0040)  // Mute DAC output channel (clear to un-mute)
#define DACMUTE_R3    (0x0020)  // Mute DAC output channel (clear to un-mute)
#define DACMUTE_L3    (0x0010)  // Mute DAC output channel (clear to un-mute)
#define DACMUTE_R2    (0x0008)  // Mute DAC output channel (clear to un-mute)
#define DACMUTE_L2    (0x0004)  // Mute DAC output channel (clear to un-mute)
#define DACMUTE_R1    (0x0002)  // Mute DAC output channel (clear to un-mute)
#define DACMUTE_L1    (0x0001)  // Mute DAC output channel (clear to un-mute)


//-------------------------------------------------------------------------------
//DAC Volume Control - 10-bit granularity (1024 levels)
#define DACVOL_MIN      (0x000)
#define DACVOL_LOW      (0X100)
#define DACVOL_MED      (0X200)
#define DACVOL_HI       (0X300)
#define DACVOL_MAX      (0x3FF)
#define DACVOL_MASK     (0x3FF)  // Volume in dB is in 10 LSBs
                                 //   3FF = 0 dBFS = 1023/1023
                                 //   3FE = -0.01 dBFS = 1022/1023
                                 //      ...
                                 //   002 = -50.7 dBFS = 3/1023
                                 //   001 = -54.2 dBFS = 2/1023

//-------------------------------------------------------------------------------
//  ADC Control 1

#define ADCHPF     (0x0100)  // High pass filter (AC-coupled)
#define ADCPOWERDN (0x0080)  // DAC into power-down mode
#define ADCFS48    (0x0000)  // Sample rate = 48 KHz
#define ADCFS96    (0x0040)  // Sample rate = 96 KHz

//-------------------------------------------------------------------------------
//  ADC Control 2

#define AUXSLAVE   (0x0000)  // Aux input is in slave mode
#define AUXMASTER  (0x0200)  // Aux input is in master mode

#define ADCI2S     (0x0000)  // ADC transmits in I2S format
#define ADCRJ      (0x0040)  // ADC transmits in right-justified format
#define ADCDSP     (0x0080)  // ADC transmits in DSP (TDM) format
#define ADCLJ      (0x00C0)  // ADC transmits in left-justified format
#define ADCPACK256 (0x0100)  // ADC transmits in packed 256 format
#define ADCAUX256  (0x0180)  // ADC transmits in packed 128 format

#define ADC24BIT   (0x0000)  // 24-bit output word length
#define ADC20BIT   (0x0010)  // 20-bit output word length
#define ADC16BIT   (0x0020)  // 16-bit output word length

#define ADCMUTER   (0x0002)  // Mute right channel from ADC
#define ADCMUTEL   (0x0001)  // Mute right channel from ADC

//-------------------------------------------------------------------------------
//  ADC Control 3

#define IMCLKx2    (0x0000)  // Internal MCLK = external MCLK x 2
#define IMCLKx1    (0x0040)  // Internal MCLK = external MCLK
#define IMCLKx23   (0x0080)  // Internal MCLK = external MCLK x 2/3

#define PEAKRDEN   (0x0020)  // Enable reads of peak ADC levels
#define PEAKLEVELMASK  (0x003F)  // Six significant bit of level
									// 000000 = 0dBFS, -1dB/LSB

#endif