?? tcm0201.pin
字號:
-- Copyright (C) 1991-2005 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, Altera MegaCore Function License
-- Agreement, or other applicable license agreement, including,
-- without limitation, that your use is for the sole purpose of
-- programming logic devices manufactured by Altera and sold by
-- Altera or its authorized distributors. Please refer to the
-- applicable agreement for further details.
--
-- This is a Quartus II output file. It is for reporting purposes only, and is
-- not intended for use as a Quartus II input file. This file cannot be used
-- to make Quartus II pin assignments - for instructions on how to make pin
-- assignments, please see Quartus II help.
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCCINT : Dedicated power pin, which MUST be connected to VCC (3.3V).
-- VCCIO : Dedicated power pin, which MUST be connected to VCC
-- of its bank.
-- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND.
-- It can also be used to report unused dedicated pins. The connection
-- on the board for unused dedicated pins depends on whether this will
-- be used in a future design. One example is device migration. When
-- using device migration, refer to the device pin-tables. If it is a
-- GND pin in the pin table or if it will not be used in a future design
-- for another purpose the it MUST be connected to GND. If it is an unused
-- dedicated pin, then it can be connected to a valid signal on the board
-- (low, high, or toggling) if that signal is required for a different
-- revision of the design.
-- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins.
-- This pin should be connected to GND. It may also be connected to a
-- valid signal on the board (low, high, or toggling) if that signal
-- is required for a different revision of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
-- RESERVED : Unused I/O pin, which MUST be left unconnected.
-- RESERVED_INPUT : Pin is tri-stated and should be connected to the board.
-- NON_MIGRATABLE: This pin cannot be migrated.
---------------------------------------------------------------------------------
Quartus II Version 5.0 Build 148 04/26/2005 SJ Full Version
CHIP "TCM0201" ASSIGNED TO AN: EPM3256ATC144-10
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
RESERVED_INPUT : 1 : : : : :
BBS/2 : 2 : output : LVTTL : : : Y
GND : 3 : gnd : : : :
TDI : 4 : input : LVTTL : : : N
RESERVED_INPUT : 5 : : : : :
RESERVED_INPUT : 6 : : : : :
RESERVED_INPUT : 7 : : : : :
RESERVED_INPUT : 8 : : : : :
RESERVED_INPUT : 9 : : : : :
RESERVED_INPUT : 10 : : : : :
RESERVED_INPUT : 11 : : : : :
RESERVED_INPUT : 12 : : : : :
GND : 13 : gnd : : : :
RESERVED_INPUT : 14 : : : : :
RESERVED_INPUT : 15 : : : : :
RESERVED_INPUT : 16 : : : : :
GND : 17 : gnd : : : :
RESERVED_INPUT : 18 : : : : :
RESERVED_INPUT : 19 : : : : :
TMS : 20 : input : LVTTL : : : N
RESERVED_INPUT : 21 : : : : :
RESERVED_INPUT : 22 : : : : :
RESERVED_INPUT : 23 : : : : :
VCCIO : 24 : power : : 3.3V : :
RESERVED_INPUT : 25 : : : : :
GND : 26 : gnd : : : :
RESERVED_INPUT : 27 : : : : :
RESERVED_INPUT : 28 : : : : :
RESERVED_INPUT : 29 : : : : :
RESERVED_INPUT : 30 : : : : :
RESERVED_INPUT : 31 : : : : :
RESERVED_INPUT : 32 : : : : :
GND : 33 : gnd : : : :
A0 : 34 : output : LVTTL : : : Y
Y1 : 35 : output : LVTTL : : : Y
DI : 36 : output : LVTTL : : : Y
Y2 : 37 : output : LVTTL : : : Y
DQ : 38 : output : LVTTL : : : Y
Y3 : 39 : output : LVTTL : : : Y
addr[0] : 40 : input : LVTTL : : : Y
addr[1] : 41 : input : LVTTL : : : Y
E1 : 42 : output : LVTTL : : : N
addr[2] : 43 : input : LVTTL : : : Y
RESERVED_INPUT : 44 : : : : :
A1 : 45 : output : LVTTL : : : Y
B5 : 46 : output : LVTTL : : : Y
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -