# Copyright (C) 1991-2004 Altera Corporation
# Any  megafunction  design,  and related netlist (encrypted  or  decrypted),
# support information,  device programming or simulation file,  and any other
# associated  documentation or information  provided by  Altera  or a partner
# under  Altera's   Megafunction   Partnership   Program  may  be  used  only
# to program  PLD  devices (but not masked  PLD  devices) from  Altera.   Any
# other  use  of such  megafunction  design,  netlist,  support  information,
# device programming or simulation file,  or any other  related documentation
# or information  is prohibited  for  any  other purpose,  including, but not
# limited to  modification,  reverse engineering,  de-compiling, or use  with
# any other  silicon devices,  unless such use is  explicitly  licensed under
# a separate agreement with  Altera  or a megafunction partner.  Title to the
# intellectual property,  including patents,  copyrights,  trademarks,  trade
# secrets,  or maskworks,  embodied in any such megafunction design, netlist,
# support  information,  device programming or simulation file,  or any other
# related documentation or information provided by  Altera  or a megafunction
# partner, remains with Altera, the megafunction partner, or their respective
# licensors. No other licenses, including any licenses needed under any third
# party's intellectual property, are provided herein.


# The default values for assignments are stored in the file
#		assignment_defaults.qdf

# Altera recommends that you do not modify this file. This
# file is updated automatically by the Quartus II software
# and any changes you make may be lost or overwritten.


# Project-Wide Assignments
# ========================
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 5.0
set_global_assignment -name PROJECT_CREATION_TIME_DATE "17:38:27  JUNE 30, 2007"
set_global_assignment -name LAST_QUARTUS_VERSION 7.1
set_global_assignment -name VERILOG_FILE taxi.v
set_global_assignment -name VECTOR_WAVEFORM_FILE taxi.vwf
set_parameter -name SIMULATOR_GENERATE_POWERPLAY_VCD_FILE ON
set_parameter -name SIMULATOR_POWERPLAY_VCD_FILE_OUTPUT_DESTINATION taxi.vcd
set_parameter -name INCREMENTAL_VECTOR_INPUT_SOURCE taxi.vwf

# Pin & Location Assignments
# ==========================
set_location_assignment PIN_21 -to min0\[0\]
set_location_assignment PIN_22 -to min0\[1\]
set_location_assignment PIN_23 -to min0\[2\]
set_location_assignment PIN_24 -to min0\[3\]
set_location_assignment PIN_25 -to min1\[0\]
set_location_assignment PIN_27 -to min1\[1\]
set_location_assignment PIN_28 -to min1\[2\]
set_location_assignment PIN_29 -to min1\[3\]
set_location_assignment PIN_30 -to km0\[0\]
set_location_assignment PIN_35 -to km0\[1\]
set_location_assignment PIN_36 -to km0\[2\]
set_location_assignment PIN_37 -to km0\[3\]
set_location_assignment PIN_38 -to km1\[0\]
set_location_assignment PIN_39 -to km1\[1\]
set_location_assignment PIN_47 -to km1\[2\]
set_location_assignment PIN_48 -to km1\[3\]
set_location_assignment PIN_49 -to cha0\[0\]
set_location_assignment PIN_50 -to cha0\[1\]
set_location_assignment PIN_51 -to cha0\[2\]
set_location_assignment PIN_52 -to cha0\[3\]
set_location_assignment PIN_53 -to cha1\[0\]
set_location_assignment PIN_54 -to cha1\[1\]
set_location_assignment PIN_58 -to cha1\[2\]
set_location_assignment PIN_59 -to cha1\[3\]
set_location_assignment PIN_60 -to cha2\[0\]
set_location_assignment PIN_61 -to cha2\[1\]
set_location_assignment PIN_62 -to cha2\[2\]
set_location_assignment PIN_64 -to cha2\[3\]
set_location_assignment PIN_65 -to cha3\[0\]
set_location_assignment PIN_66 -to cha3\[1\]
set_location_assignment PIN_67 -to cha3\[2\]
set_location_assignment PIN_69 -to cha3\[3\]
set_location_assignment PIN_9 -to reset
set_location_assignment PIN_8 -to start
set_location_assignment PIN_10 -to drive
set_location_assignment PIN_3 -to f64

# Analysis & Synthesis Assignments
# ================================
set_global_assignment -name FAMILY FLEX10K
set_global_assignment -name DEVICE_FILTER_SPEED_GRADE 4
set_global_assignment -name DEVICE_FILTER_PIN_COUNT 84
set_global_assignment -name DEVICE_FILTER_PACKAGE PLCC
set_global_assignment -name TOP_LEVEL_ENTITY taxi

# Fitter Assignments
# ==================
set_global_assignment -name DEVICE "EPF10K10LC84-4"

# Simulator Assignments
# =====================
set_global_assignment -name SIMULATION_MODE FUNCTIONAL

set_location_assignment PIN_72 -to flagmile
set_location_assignment PIN_70 -to flagmin