% Altera NCO Compiler version 6.1%    function [s,c] = nco1_model(phi_inc_i,phase_mod_i,freq_mod_i)%    input  :  phi_inc_i   : phase increment input (required)%              phase_mod_i : phase modulation input(optional)%              freq_mod_i  : frequency modulation input(optional)%    output :  s           : sine wave output%              c           : cosine wave outputfunction [s,c] = nco1_model(phi_inc_i,phase_mod_i,freq_mod_i)addpath f:/program files/altera/61/ip/nco/lib/ip_toolbench/../;if(nargin==0) fprintf('Error using nco1_model : Not enough input arguments\n');else N=length(phi_inc_i);endif(nargin==1) phase_mod_i=zeros(1,N); freq_mod_i=zeros(1,N);elseif(nargin==2) if(length(phase_mod_i)~=N)   fprintf('Error using nco1_model : input vector length mismatch\n'); else   freq_mod_i=zeros(1,N); endelseif(nargin==3) if((length(phase_mod_i)~=N)|length(freq_mod_i)~=N)   fprintf('Error using nco1_model : input vector length mismatch\n'); endelse fprintf('Error using nco1_model : Incorrect number of input arguments\n');endN=length(phi_inc_i);numch = 1.0;apr = 32.0;apri = 16.0;mpr = 14.0;aprp = 16.0;aprf = 32.0;dpri = 5.0;arch = 0.0;wantFmod = 0.0;wantPmod = 0.0;dual = 1.0;[s,c] = Sncomodel(phi_inc_i,phase_mod_i,freq_mod_i,wantFmod,wantPmod,numch,apr,mpr,apri,aprp,aprf,dpri,arch,dual,N);