?? at91sam9260.h
字號:
AT91_REG SMC_PULSE2; // Pulse Register for CS 2
AT91_REG SMC_CYCLE2; // Cycle Register for CS 2
AT91_REG SMC_CTRL2; // Control Register for CS 2
AT91_REG SMC_SETUP3; // Setup Register for CS 3
AT91_REG SMC_PULSE3; // Pulse Register for CS 3
AT91_REG SMC_CYCLE3; // Cycle Register for CS 3
AT91_REG SMC_CTRL3; // Control Register for CS 3
AT91_REG SMC_SETUP4; // Setup Register for CS 4
AT91_REG SMC_PULSE4; // Pulse Register for CS 4
AT91_REG SMC_CYCLE4; // Cycle Register for CS 4
AT91_REG SMC_CTRL4; // Control Register for CS 4
AT91_REG SMC_SETUP5; // Setup Register for CS 5
AT91_REG SMC_PULSE5; // Pulse Register for CS 5
AT91_REG SMC_CYCLE5; // Cycle Register for CS 5
AT91_REG SMC_CTRL5; // Control Register for CS 5
AT91_REG SMC_SETUP6; // Setup Register for CS 6
AT91_REG SMC_PULSE6; // Pulse Register for CS 6
AT91_REG SMC_CYCLE6; // Cycle Register for CS 6
AT91_REG SMC_CTRL6; // Control Register for CS 6
AT91_REG SMC_SETUP7; // Setup Register for CS 7
AT91_REG SMC_PULSE7; // Pulse Register for CS 7
AT91_REG SMC_CYCLE7; // Cycle Register for CS 7
AT91_REG SMC_CTRL7; // Control Register for CS 7
} AT91S_SMC, *AT91PS_SMC;
// -------- SMC_SETUP : (SMC Offset: 0x0) Setup Register for CS x --------
#define AT91C_SMC_NWESETUP ((unsigned int) 0x3F << 0) // (SMC) NWE Setup Length
#define AT91C_SMC_NCSSETUPWR ((unsigned int) 0x3F << 8) // (SMC) NCS Setup Length in WRite Access
#define AT91C_SMC_NRDSETUP ((unsigned int) 0x3F << 16) // (SMC) NRD Setup Length
#define AT91C_SMC_NCSSETUPRD ((unsigned int) 0x3F << 24) // (SMC) NCS Setup Length in ReaD Access
// -------- SMC_PULSE : (SMC Offset: 0x4) Pulse Register for CS x --------
#define AT91C_SMC_NWEPULSE ((unsigned int) 0x7F << 0) // (SMC) NWE Pulse Length
#define AT91C_SMC_NCSPULSEWR ((unsigned int) 0x7F << 8) // (SMC) NCS Pulse Length in WRite Access
#define AT91C_SMC_NRDPULSE ((unsigned int) 0x7F << 16) // (SMC) NRD Pulse Length
#define AT91C_SMC_NCSPULSERD ((unsigned int) 0x7F << 24) // (SMC) NCS Pulse Length in ReaD Access
// -------- SMC_CYC : (SMC Offset: 0x8) Cycle Register for CS x --------
#define AT91C_SMC_NWECYCLE ((unsigned int) 0x1FF << 0) // (SMC) Total Write Cycle Length
#define AT91C_SMC_NRDCYCLE ((unsigned int) 0x1FF << 16) // (SMC) Total Read Cycle Length
// -------- SMC_CTRL : (SMC Offset: 0xc) Control Register for CS x --------
#define AT91C_SMC_READMODE ((unsigned int) 0x1 << 0) // (SMC) Read Mode
#define AT91C_SMC_WRITEMODE ((unsigned int) 0x1 << 1) // (SMC) Write Mode
#define AT91C_SMC_NWAITM ((unsigned int) 0x3 << 5) // (SMC) NWAIT Mode
#define AT91C_SMC_NWAITM_NWAIT_DISABLE ((unsigned int) 0x0 << 5) // (SMC) External NWAIT disabled.
#define AT91C_SMC_NWAITM_NWAIT_ENABLE_FROZEN ((unsigned int) 0x2 << 5) // (SMC) External NWAIT enabled in frozen mode.
#define AT91C_SMC_NWAITM_NWAIT_ENABLE_READY ((unsigned int) 0x3 << 5) // (SMC) External NWAIT enabled in ready mode.
#define AT91C_SMC_BAT ((unsigned int) 0x1 << 8) // (SMC) Byte Access Type
#define AT91C_SMC_BAT_BYTE_SELECT ((unsigned int) 0x0 << 8) // (SMC) Write controled by ncs, nbs0, nbs1, nbs2, nbs3. Read controled by ncs, nrd, nbs0, nbs1, nbs2, nbs3.
#define AT91C_SMC_BAT_BYTE_WRITE ((unsigned int) 0x1 << 8) // (SMC) Write controled by ncs, nwe0, nwe1, nwe2, nwe3. Read controled by ncs and nrd.
#define AT91C_SMC_DBW ((unsigned int) 0x3 << 12) // (SMC) Data Bus Width
#define AT91C_SMC_DBW_WIDTH_EIGTH_BITS ((unsigned int) 0x0 << 12) // (SMC) 8 bits.
#define AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS ((unsigned int) 0x1 << 12) // (SMC) 16 bits.
#define AT91C_SMC_DBW_WIDTH_THIRTY_TWO_BITS ((unsigned int) 0x2 << 12) // (SMC) 32 bits.
#define AT91C_SMC_TDF ((unsigned int) 0xF << 16) // (SMC) Data Float Time.
#define AT91C_SMC_TDFEN ((unsigned int) 0x1 << 20) // (SMC) TDF Enabled.
#define AT91C_SMC_PMEN ((unsigned int) 0x1 << 24) // (SMC) Page Mode Enabled.
#define AT91C_SMC_PS ((unsigned int) 0x3 << 28) // (SMC) Page Size
#define AT91C_SMC_PS_SIZE_FOUR_BYTES ((unsigned int) 0x0 << 28) // (SMC) 4 bytes.
#define AT91C_SMC_PS_SIZE_EIGHT_BYTES ((unsigned int) 0x1 << 28) // (SMC) 8 bytes.
#define AT91C_SMC_PS_SIZE_SIXTEEN_BYTES ((unsigned int) 0x2 << 28) // (SMC) 16 bytes.
#define AT91C_SMC_PS_SIZE_THIRTY_TWO_BYTES ((unsigned int) 0x3 << 28) // (SMC) 32 bytes.
// -------- SMC_SETUP : (SMC Offset: 0x10) Setup Register for CS x --------
// -------- SMC_PULSE : (SMC Offset: 0x14) Pulse Register for CS x --------
// -------- SMC_CYC : (SMC Offset: 0x18) Cycle Register for CS x --------
// -------- SMC_CTRL : (SMC Offset: 0x1c) Control Register for CS x --------
// -------- SMC_SETUP : (SMC Offset: 0x20) Setup Register for CS x --------
// -------- SMC_PULSE : (SMC Offset: 0x24) Pulse Register for CS x --------
// -------- SMC_CYC : (SMC Offset: 0x28) Cycle Register for CS x --------
// -------- SMC_CTRL : (SMC Offset: 0x2c) Control Register for CS x --------
// -------- SMC_SETUP : (SMC Offset: 0x30) Setup Register for CS x --------
// -------- SMC_PULSE : (SMC Offset: 0x34) Pulse Register for CS x --------
// -------- SMC_CYC : (SMC Offset: 0x38) Cycle Register for CS x --------
// -------- SMC_CTRL : (SMC Offset: 0x3c) Control Register for CS x --------
// -------- SMC_SETUP : (SMC Offset: 0x40) Setup Register for CS x --------
// -------- SMC_PULSE : (SMC Offset: 0x44) Pulse Register for CS x --------
// -------- SMC_CYC : (SMC Offset: 0x48) Cycle Register for CS x --------
// -------- SMC_CTRL : (SMC Offset: 0x4c) Control Register for CS x --------
// -------- SMC_SETUP : (SMC Offset: 0x50) Setup Register for CS x --------
// -------- SMC_PULSE : (SMC Offset: 0x54) Pulse Register for CS x --------
// -------- SMC_CYC : (SMC Offset: 0x58) Cycle Register for CS x --------
// -------- SMC_CTRL : (SMC Offset: 0x5c) Control Register for CS x --------
// -------- SMC_SETUP : (SMC Offset: 0x60) Setup Register for CS x --------
// -------- SMC_PULSE : (SMC Offset: 0x64) Pulse Register for CS x --------
// -------- SMC_CYC : (SMC Offset: 0x68) Cycle Register for CS x --------
// -------- SMC_CTRL : (SMC Offset: 0x6c) Control Register for CS x --------
// -------- SMC_SETUP : (SMC Offset: 0x70) Setup Register for CS x --------
// -------- SMC_PULSE : (SMC Offset: 0x74) Pulse Register for CS x --------
// -------- SMC_CYC : (SMC Offset: 0x78) Cycle Register for CS x --------
// -------- SMC_CTRL : (SMC Offset: 0x7c) Control Register for CS x --------
// *****************************************************************************
// SOFTWARE API DEFINITION FOR AHB Matrix Interface
// *****************************************************************************
typedef struct _AT91S_MATRIX {
AT91_REG MATRIX_MCFG0; // Master Configuration Register 0 (ram96k)
AT91_REG MATRIX_MCFG1; // Master Configuration Register 1 (rom)
AT91_REG MATRIX_MCFG2; // Master Configuration Register 2 (hperiphs)
AT91_REG MATRIX_MCFG3; // Master Configuration Register 3 (ebi)
AT91_REG MATRIX_MCFG4; // Master Configuration Register 4 (bridge)
AT91_REG MATRIX_MCFG5; // Master Configuration Register 5 (mailbox)
AT91_REG Reserved0[10]; //
AT91_REG MATRIX_SCFG0; // Slave Configuration Register 0 (ram96k)
AT91_REG MATRIX_SCFG1; // Slave Configuration Register 1 (rom)
AT91_REG MATRIX_SCFG2; // Slave Configuration Register 2 (hperiphs)
AT91_REG MATRIX_SCFG3; // Slave Configuration Register 3 (ebi)
AT91_REG MATRIX_SCFG4; // Slave Configuration Register 4 (bridge)
AT91_REG Reserved1[11]; //
AT91_REG MATRIX_PRAS0; // PRAS0 (ram0)
AT91_REG Reserved2[1]; //
AT91_REG MATRIX_PRAS1; // PRAS1 (ram1)
AT91_REG Reserved3[1]; //
AT91_REG MATRIX_PRAS2; // PRAS2 (ram2)
AT91_REG Reserved4[1]; //
AT91_REG MATRIX_PRAS3; // PRAS3 (ebi)
AT91_REG Reserved5[1]; //
AT91_REG MATRIX_PRAS4; // PRAS4 (periph)
AT91_REG Reserved6[23]; //
AT91_REG MATRIX_MRCR; // Master Remp Control Register
} AT91S_MATRIX, *AT91PS_MATRIX;
// -------- MATRIX_SCFG0 : (MATRIX Offset: 0x40) Slave Configuration Register 0 --------
#define AT91C_MATRIX_SLOT_CYCLE ((unsigned int) 0xFF << 0) // (MATRIX) Maximum Number of Allowed Cycles for a Burst
#define AT91C_MATRIX_DEFMSTR_TYPE ((unsigned int) 0x3 << 16) // (MATRIX) Default Master Type
#define AT91C_MATRIX_DEFMSTR_TYPE_NO_DEFMSTR ((unsigned int) 0x0 << 16) // (MATRIX) No Default Master. At the end of current slave access, if no other master request is pending, the slave is deconnected from all masters. This results in having a one cycle latency for the first transfer of a burst.
#define AT91C_MATRIX_DEFMSTR_TYPE_LAST_DEFMSTR ((unsigned int) 0x1 << 16) // (MATRIX) Last Default Master. At the end of current slave access, if no other master request is pending, the slave stay connected with the last master having accessed it. This results in not having the one cycle latency when the last master re-trying access on the slave.
#define AT91C_MATRIX_DEFMSTR_TYPE_FIXED_DEFMSTR ((unsigned int) 0x2 << 16) // (MATRIX) Fixed Default Master. At the end of current slave access, if no other master request is pending, the slave connects with fixed which number is in FIXED_DEFMSTR field. This results in not having the one cycle latency when the fixed master re-trying access on the slave.
#define AT91C_MATRIX_FIXED_DEFMSTR0 ((unsigned int) 0x7 << 18) // (MATRIX) Fixed Index of Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR0_ARM926I ((unsigned int) 0x0 << 18) // (MATRIX) ARM926EJ-S Instruction Master is Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR0_ARM926D ((unsigned int) 0x1 << 18) // (MATRIX) ARM926EJ-S Data Master is Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR0_HPDC3 ((unsigned int) 0x2 << 18) // (MATRIX) HPDC3 Master is Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR0_LCDC ((unsigned int) 0x3 << 18) // (MATRIX) LCDC Master is Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR0_DMA ((unsigned int) 0x4 << 18) // (MATRIX) DMA Master is Default Master
// -------- MATRIX_SCFG1 : (MATRIX Offset: 0x44) Slave Configuration Register 1 --------
#define AT91C_MATRIX_FIXED_DEFMSTR1 ((unsigned int) 0x7 << 18) // (MATRIX) Fixed Index of Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR1_ARM926I ((unsigned int) 0x0 << 18) // (MATRIX) ARM926EJ-S Instruction Master is Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR1_ARM926D ((unsigned int) 0x1 << 18) // (MATRIX) ARM926EJ-S Data Master is Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR1_HPDC3 ((unsigned int) 0x2 << 18) // (MATRIX) HPDC3 Master is Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR1_LCDC ((unsigned int) 0x3 << 18) // (MATRIX) LCDC Master is Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR1_DMA ((unsigned int) 0x4 << 18) // (MATRIX) DMA Master is Default Master
// -------- MATRIX_SCFG2 : (MATRIX Offset: 0x48) Slave Configuration Register 2 --------
#define AT91C_MATRIX_FIXED_DEFMSTR2 ((unsigned int) 0x1 << 18) // (MATRIX) Fixed Index of Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR2_ARM926I ((unsigned int) 0x0 << 18) // (MATRIX) ARM926EJ-S Instruction Master is Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR2_ARM926D ((unsigned int) 0x1 << 18) // (MATRIX) ARM926EJ-S Data Master is Default Master
// -------- MATRIX_SCFG3 : (MATRIX Offset: 0x4c) Slave Configuration Register 3 --------
#define AT91C_MATRIX_FIXED_DEFMSTR3 ((unsigned int) 0x7 << 18) // (MATRIX) Fixed Index of Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR3_ARM926I ((unsigned int) 0x0 << 18) // (MATRIX) ARM926EJ-S Instruction Master is Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR3_ARM926D ((unsigned int) 0x1 << 18) // (MATRIX) ARM926EJ-S Data Master is Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR3_HPDC3 ((unsigned int) 0x2 << 18) // (MATRIX) HPDC3 Master is Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR3_LCDC ((unsigned int) 0x3 << 18) // (MATRIX) LCDC Master is Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR3_DMA ((unsigned int) 0x4 << 18) // (MATRIX) DMA Master is Default Master
// -------- MATRIX_SCFG4 : (MATRIX Offset: 0x50) Slave Configuration Register 4 --------
#define AT91C_MATRIX_FIXED_DEFMSTR4 ((unsigned int) 0x3 << 18) // (MATRIX) Fixed Index of Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR4_ARM926I ((unsigned int) 0x0 << 18) // (MATRIX) ARM926EJ-S Instruction Master is Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR4_ARM926D ((unsigned int) 0x1 << 18) // (MATRIX) ARM926EJ-S Data Master is Default Master
#define AT91C_MATRIX_FIXED_DEFMSTR4_HPDC3 ((unsigned int) 0x2 << 18) // (MATRIX) HPDC3 Master is Default Master
// -------- MATRIX_MRCR : (MATRIX Offset: 0x100) MRCR Register --------
#define AT91C_MATRIX_RCA926I ((unsigned int) 0x1 << 0) // (MATRIX) Remap Command for ARM926EJ-S Instruction Master
#define AT91C_MATRIX_RCA926D ((unsigned int) 0x1 << 1) // (MATRIX) Remap Command for ARM926EJ-S Data Master
// *****************************************************************************
// SOFTWARE API DEFINITION FOR Chip Configuration Registers
// *****************************************************************************
typedef struct _AT91S_CCFG {
AT91_REG Reserved0[3]; //
AT91_REG CCFG_EBICSA; // EBI Chip Select Assignement Register
AT91_REG Reserved1[55]; //
AT91_REG CCFG_MATRIXVERSION; // Version Register
} AT91S_CCFG, *AT91PS_CCFG;
// -------- CCFG_EBICSA : (CCFG Offset: 0xc) EBI Chip Select Assignement Register --------
#define AT91C_EBI_CS1A ((unsigned int) 0x1 << 1) // (CCFG) Chip Select 1 Assignment
#define AT91C_EBI_CS1A_SMC ((unsigned int) 0x0 << 1) // (CCFG) Chip Select 1 is assigned to the Static Memory Controller.
#define AT91C_EBI_CS1A_SDRAMC ((unsigned int) 0x1 << 1) // (CCFG) Chip Select 1 is assigned to the SDRAM Controller.
#define AT91C_EBI_CS3A ((unsigned int) 0x1 << 3) // (CCFG) Chip Select 3 Assignment
#define AT91C_EBI_CS3A_SMC ((unsigned int) 0x0 << 3) // (CCFG) Chip Select 3 is only assigned to the Static Memory Controller and NCS3 behaves as defined by the SMC.
#define AT91C_EBI_CS3A_SM ((unsigned int) 0x1 << 3) // (CCFG) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated.
#define AT91C_EBI_CS4A ((unsigned int) 0x1 << 4) // (CCFG) Chip Select 4 Assignment
#define AT91C_EBI_CS4A_SMC ((unsigned int) 0x0 << 4) // (CCFG) Chip Select 4 is only assigned to the Static Memory Controller and NCS4 behaves as defined by the SMC.
#define AT91C_EBI_CS4A_CF ((unsigned int) 0x1 << 4) // (CCFG) Chip Select 4 is assigned to the Static Memory Controller and the CompactFlash Logic (first slot) is activated.
#define AT91C_EBI_CS5A ((unsigned int) 0x1 << 5) // (CCFG) Chip Select 5 Assignment
#define AT91C_EBI_CS5A_SMC ((unsigned int) 0x0 << 5) // (CCFG) Chip Select 5 is only assigned to the Static Memory Controller and NCS5 behaves as defined by the SMC
#define AT91C_EBI_CS5A_CF ((unsigned int) 0x1 << 5) // (CCFG) Chip Select 5 is assigned to the Static Memory Controller and the CompactFlash Logic (second slot) is activated.
#define AT91C_EBI_DBPUC ((unsigned int) 0x1 << 8) // (CCFG) Data Bus Pull-up Configuration
// *****************************************************************************
// SOFTWARE API DEFINITION FOR Peripheral DMA Controller
// *****************************************************************************
typedef struct _AT91S_PDC {
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -