; File for saving command history
; CommandHistory = cmdhist.log

; Specify whether paths in simulator commands should be described
; in VHDL or Verilog format.
; For VHDL, PathSeparator = /
; For Verilog, PathSeparator = .
; Must not be the same character as DatasetSeparator.
PathSeparator = /

; Specify the dataset separator for fully rooted contexts.
; The default is ':'. For example: sim:/top
; Must not be the same character as PathSeparator.
DatasetSeparator = :

; Disable VHDL assertion messages
; IgnoreNote = 1
; IgnoreWarning = 1
; IgnoreError = 1
; IgnoreFailure = 1

; Disable System Verilog assertion messages
; Info and Warning are disabled by default
; IgnoreSVAInfo = 0
; IgnoreSVAWarning = 0
; IgnoreSVAError = 1
; IgnoreSVAFatal = 1

; Default force kind. May be freeze, drive, deposit, or default
; or in other terms, fixed, wired, or charged.
; A value of "default" will use the signal kind to determine the
; force kind, drive for resolved signals, freeze for unresolved signals
; DefaultForceKind = freeze

; If zero, open files when elaborated; otherwise, open files on
; first read or write.  Default is 0.
; DelayFileOpen = 1

; Control VHDL files opened for write.
;   0 = Buffered, 1 = Unbuffered
UnbufferedOutput = 0

; Control the number of VHDL files open concurrently.
; This number should always be less than the current ulimit
; setting for max file descriptors.
;   0 = unlimited
ConcurrentFileLimit = 40

; Control the number of hierarchical regions displayed as
; part of a signal name shown in the Wave window.
; A value of zero tells VSIM to display the full name.
; The default is 0.
; WaveSignalNameWidth = 0

; Turn off warnings when changinge VHDL constants and generics
; Default is 1 to generate warning messages
; WarnConstantChange = 0

; Turn off warnings from the std_logic_arith, std_logic_unsigned
; and std_logic_signed packages.
; StdArithNoWarnings = 1

; Turn off warnings from the IEEE numeric_std and numeric_bit packages.
; NumericStdNoWarnings = 1

; Control the format of a generate statement label. Do not quote it.
; GenerateFormat = %s__%d

; Specify whether checkpoint files should be compressed.
; The default is 1 (compressed).
; CheckpointCompressMode = 0

; List of dynamically loaded objects for Verilog PLI applications
; Veriuser = veriuser.sl

; Specify default options for the restart command. Options can be one
; or more of: -force -nobreakpoint -nolist -nolog -nowave -noassertions
; DefaultRestartOptions = -force

; HP-UX 10.20 ONLY - Enable memory locking to speed up large designs
; (> 500 megabyte memory footprint). Default is disabled.
; Specify number of megabytes to lock.
; LockedMemory = 1000

; HP-UX 11.00 ONLY - Use /usr/lib/libCsup_v2.sl for shared object loading.
; This is necessary when C++ files have been compiled with aCC's -AA option.
; The default behavior is to use /usr/lib/libCsup.sl.
; UseCsupV2 = 1

; Turn on (1) or off (0) WLF file compression.
; The default is 1 (compress WLF file).
; WLFCompress = 0

; Specify whether to save all design hierarchy (1) in the WLF file
; or only regions containing logged signals (0).
; The default is 0 (log only regions with logged signals).
; WLFSaveAllRegions = 1

; WLF file time limit.  Limit WLF file by time, as closely as possible,
; to the specified amount of simulation time.  When the limit is exceeded
; the earliest times get truncated from the file.
; If both time and size limits are specified the most restrictive is used.
; UserTimeUnits are used if time units are not specified.
; The default is 0 (no limit).  Example: WLFTimeLimit = {100 ms}
; WLFTimeLimit = 0

; WLF file size limit.  Limit WLF file size, as closely as possible,
; to the specified number of megabytes.  If both time and size limits
; are specified then the most restrictive is used.
; The default is 0 (no limit).
; WLFSizeLimit = 1000

; Specify whether or not a WLF file should be deleted when the
; simulation ends.  A value of 1 will cause the WLF file to be deleted.
; The default is 0 (do not delete WLF file when simulation ends).
; WLFDeleteOnQuit = 1

; Specify whether or not a WLF file should be optimized during 
; simulation.  If set to 0, the WLF file will not be optimized.
; The default is 1, optimize the WLF file.
; WLFOptimize = 0

; Specify the name of the WLF file.
; The default is vsim.wlf
; WLFFilename = vsim.wlf

; WLF reader cache size limit.  Specifies the internal WLF file cache size, 
; in megabytes, for EACH open WLF file.  A value of 0 turns off the
; WLF cache.
; The default is 0, disable WLF file caching.
; WLFCacheSize = 1000 

; Specify the WLF file event collapse mode.
; 0 = Preserve all events and event order. (same as -wlfnocollapse)
; 1 = Only record values of logged objects at the end of a simulator iteration. 
;     (same as -wlfcollapsedelta)
; 2 = Only record values of logged objects at the end of a simulator time step. 
;     (same as -wlfcollapsetime)
; The default is 1.
; WLFCollapseMode = 0

; Turn on/off undebuggable SystemC type warnings. Default is on.
; ShowUndebuggableScTypeWarning = 0

; Turn on/off unassociated SystemC name warnings. Default is off.
; ShowUnassociatedScNameWarning = 1

; Set SystemC default time unit.
; Set to fs, ps, ns, us, ms, or sec with optional 
; prefix of 1, 10, or 100.  The default is 1 ns.
; The ScTimeUnit value is honored if it is coarser than Resolution.
; If ScTimeUnit is finer than Resolution, it is set to the value
; of Resolution. For example, if Resolution is 100ps and ScTimeUnit is ns,
; then the default time unit will be 1 ns.  However if Resolution 
; is 10 ns and ScTimeUnit is ns, then the default time unit will be 10 ns.
ScTimeUnit = ns


; Run simulator in assertion debug mode. Default is off.
; AssertionDebug = 1

; Turn on/off PSL/SVA concurrent assertion pass enable. Default is on.
; AssertionPassEnable = 0 

; Turn on/off PSL/SVA concurrent assertion fail enable. Default is on.
; AssertionFailEnable = 0

; Set PSL/SVA concurrent assertion pass limit. Default is -1.
; Any positive integer, -1 for infinity.
; AssertionPassLimit = 1

; Set PSL/SVA concurrent assertion fail limit. Default is -1.
; Any positive integer, -1 for infinity.
; AssertionFailLimit = 1

; Turn on/off PSL concurrent assertion pass log. Default is off. 
; The flag does not affect SVA
; AssertionPassLog = 1

; Turn on/off PSL concurrent assertion fail log. Default is on. 
; The flag does not affect SVA
; AssertionFailLog = 0

; Set action type for PSL/SVA concurrent assertion fail action. Default is continue.
; 0 = Continue  1 = Break  2 = Exit
; AssertionFailAction = 1

; Turn on/off code coverage
; CodeCoverage = 0

; Count all code coverage condition and expression truth table rows that match.
; CoverCountAll = 1

; Turn on/off all PSL/SVA cover directive enables.  Default is on.
; CoverEnable = 0

; Turn on/off PSL/SVA cover log.  Default is off.
; CoverLog = 1

; Set "at_least" value for all PSL/SVA cover directives.  Default is 1.
; CoverAtLeast = 2

; Set "limit" value for all PSL/SVA cover directives.  Default is -1.
; Any positive integer, -1 for infinity.
; CoverLimit = 1

; Specify the functional coverage database filename.
; The default is vsim.fcdb
; FCDBFilename = vsim.fcdb

; Set weight for all PSL/SVA cover directives.  Default is 1.
; CoverWeight = 2

; Check vsim plusargs.  Default is 0 (off).
; 0 = Don't check plusargs
; 1 = Warning on unrecognized plusarg
; 2 = Error and exit on unrecognized plusarg
; CheckPlusargs = 1

; Load the specified shared objects with the RTLD_GLOBAL flag.
; This gives global visibility to all symbols in the shared objects,
; meaning that subsequently loaded shared objects can bind to symbols
; in the global shared objects.  The list of shared objects should
; be whitespace delimited.  This option is not supported on the
; Windows or AIX platforms.
; GlobalSharedObjectList = example1.so example2.so example3.so

; Run the 0in tools from within the simulator. 
; Default value set to 0. Please set it to 1 to invoke 0in.
; VsimZeroIn = 1

; Set the options to be passed to the 0in tools.
; Default value set to "". Please set it to appropriate options needed.
; VsimZeroInOptions = ""

; Initial seed for the Random Number Generator (RNG) of the root thread (SystemVerilog).
;Sv_Seed = 0

; Error message severity when randomize() failure is detected (SystemVerilog).
; The default is 0 (no error).
; 0 = No error  1 = Warning  2 = Error  3 = Failure  4 = Fatal
; SolveFailSeverity = 0

; Enable/disable debug information for randomize() failures (SystemVerilog).
; The default is 0 (disabled). Set to 1 to enable.
; SolveFailDebug = 0

[lmc]
; The simulator's interface to Logic Modeling's SmartModel SWIFT software
libsm = $MODEL_TECH/libsm.sl
; The simulator's interface to Logic Modeling's SmartModel SWIFT software (Windows NT)
; libsm = $MODEL_TECH/libsm.dll
;  Logic Modeling's SmartModel SWIFT software (HP 9000 Series 700)
; libswift = $LMC_HOME/lib/hp700.lib/libswift.sl
;  Logic Modeling's SmartModel SWIFT software (IBM RISC System/6000)
; libswift = $LMC_HOME/lib/ibmrs.lib/swift.o
;  Logic Modeling's SmartModel SWIFT software (Sun4 Solaris)
; libswift = $LMC_HOME/lib/sun4Solaris.lib/libswift.so
;  Logic Modeling's SmartModel SWIFT software (Windows NT)
; libswift = $LMC_HOME/lib/pcnt.lib/libswift.dll
;  Logic Modeling's SmartModel SWIFT software (Linux)
; libswift = $LMC_HOME/lib/x86_linux.lib/libswift.so

; The simulator's interface to Logic Modeling's hardware modeler SFI software
libhm = $MODEL_TECH/libhm.sl
; The simulator's interface to Logic Modeling's hardware modeler SFI software (Windows NT)
; libhm = $MODEL_TECH/libhm.dll
;  Logic Modeling's hardware modeler SFI software (HP 9000 Series 700)
; libsfi = <sfi_dir>/lib/hp700/libsfi.sl
;  Logic Modeling's hardware modeler SFI software (IBM RISC System/6000)
; libsfi = <sfi_dir>/lib/rs6000/libsfi.a
;  Logic Modeling's hardware modeler SFI software (Sun4 Solaris)
; libsfi = <sfi_dir>/lib/sun4.solaris/libsfi.so
;  Logic Modeling's hardware modeler SFI software (Windows NT)
; libsfi = <sfi_dir>/lib/pcnt/lm_sfi.dll
;  Logic Modeling's hardware modeler SFI software (Linux)
; libsfi = <sfi_dir>/lib/linux/libsfi.so

[msg_system]
; Change a message severity or suppress a message.
; The format is: <msg directive> = <msg number>[,<msg number>...]
; Examples:
;   note = 3009
;   warning = 3033
;   error = 3010,3016
;   suppress = 3009,3016,3043
; The command verror <msg number> can be used to get the complete
; description of a message.

[Project]
Project_Version = 6
Project_DefaultLib = work
Project_SortMethod = unused
Project_Files_Count = 11
Project_File_0 = E:/studienarbeit/gff_int_mul/halfadder.vhd
Project_File_P_0 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1176910680 vhdl_disableopt 0 vhdl_vital 0 vhdl_warn1 1 vhdl_vopt 0 vhdl_showsource 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_0InOptions {} vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 ood 0 vhdl_warn5 1 compile_to work compile_order 9 dont_compile 0 cover_nosub 0 vhdl_use93 2002
Project_File_1 = E:/studienarbeit/gff_int_mul/add8_3.vhd
Project_File_P_1 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1192138762 vhdl_disableopt 0 vhdl_vital 0 vhdl_warn1 1 vhdl_vopt 0 vhdl_showsource 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_0InOptions {} vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 ood 0 vhdl_warn5 1 compile_to work compile_order 6 dont_compile 0 cover_nosub 0 vhdl_use93 2002
Project_File_2 = E:/Studium/studienarbeit/source code and script/pp_mult/pp_braun_ff_liu_optimized/top_mult_tb.vhd
Project_File_P_2 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1192138812 vhdl_disableopt 0 vhdl_vital 0 vhdl_warn1 1 vhdl_vopt 0 vhdl_showsource 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_0InOptions {} vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 ood 0 vhdl_warn5 1 compile_to work compile_order 7 dont_compile 0 cover_nosub 0 vhdl_use93 2002
Project_File_3 = E:/studienarbeit/gff_int_mul/mod8_1.vhd
Project_File_P_3 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1191756754 vhdl_disableopt 0 vhdl_vital 0 vhdl_vopt 0 vhdl_warn1 1 vhdl_explicit 1 vhdl_warn2 1 vhdl_showsource 0 vhdl_warn3 1 vhdl_0InOptions {} vhdl_warn4 1 vhdl_options {} vhdl_warn5 1 ood 0 compile_to work compile_order 2 cover_nosub 0 dont_compile 0 vhdl_use93 2002
Project_File_4 = E:/studienarbeit/gff_int_mul/top_mult.vhd
Project_File_P_4 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1191867282 vhdl_disableopt 0 vhdl_vital 0 vhdl_vopt 0 vhdl_warn1 1 vhdl_explicit 1 vhdl_warn2 1 vhdl_showsource 0 vhdl_warn3 1 vhdl_0InOptions {} vhdl_warn4 1 vhdl_options {} vhdl_warn5 1 ood 0 compile_to work compile_order 5 cover_nosub 0 dont_compile 0 vhdl_use93 2002
Project_File_5 = E:/studienarbeit/gff_int_mul/add8_1.vhd
Project_File_P_5 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1191756679 vhdl_disableopt 0 vhdl_vital 0 vhdl_vopt 0 vhdl_warn1 1 vhdl_explicit 1 vhdl_warn2 1 vhdl_showsource 0 vhdl_warn3 1 vhdl_0InOptions {} vhdl_warn4 1 vhdl_options {} vhdl_warn5 1 ood 0 compile_to work compile_order 0 cover_nosub 0 dont_compile 0 vhdl_use93 2002
Project_File_6 = E:/studienarbeit/gff_int_mul/reg16.vhd
Project_File_P_6 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1191756762 vhdl_disableopt 0 vhdl_vital 0 vhdl_vopt 0 vhdl_warn1 1 vhdl_explicit 1 vhdl_warn2 1 vhdl_showsource 0 vhdl_warn3 1 vhdl_0InOptions {} vhdl_warn4 1 vhdl_options {} vhdl_warn5 1 ood 0 compile_to work compile_order 4 cover_nosub 0 dont_compile 0 vhdl_use93 2002
Project_File_7 = E:/studienarbeit/gff_int_mul/gff3.vhd
Project_File_P_7 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1192015184 vhdl_disableopt 0 vhdl_vital 0 vhdl_vopt 0 vhdl_warn1 1 vhdl_explicit 1 vhdl_warn2 1 vhdl_showsource 0 vhdl_warn3 1 vhdl_0InOptions {} vhdl_warn4 1 vhdl_options {} vhdl_warn5 1 ood 0 compile_to work compile_order 10 cover_nosub 0 dont_compile 0 vhdl_use93 2002
Project_File_8 = E:/studienarbeit/gff_int_mul/add8_2.vhd
Project_File_P_8 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1191868220 vhdl_disableopt 0 vhdl_vital 0 vhdl_vopt 0 vhdl_warn1 1 vhdl_explicit 1 vhdl_warn2 1 vhdl_showsource 0 vhdl_warn3 1 vhdl_0InOptions {} vhdl_warn4 1 vhdl_options {} vhdl_warn5 1 ood 0 compile_to work compile_order 1 cover_nosub 0 dont_compile 0 vhdl_use93 2002
Project_File_9 = E:/studienarbeit/gff_int_mul/reg8.vhd
Project_File_P_9 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1191756718 vhdl_disableopt 0 vhdl_vital 0 vhdl_vopt 0 vhdl_warn1 1 vhdl_explicit 1 vhdl_warn2 1 vhdl_showsource 0 vhdl_warn3 1 vhdl_0InOptions {} vhdl_warn4 1 vhdl_options {} vhdl_warn5 1 ood 0 compile_to work compile_order 3 cover_nosub 0 dont_compile 0 vhdl_use93 2002
Project_File_10 = E:/studienarbeit/gff_int_mul/fadder.vhd
Project_File_P_10 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1191948948 vhdl_disableopt 0 vhdl_vital 0 vhdl_vopt 0 vhdl_warn1 1 vhdl_explicit 1 vhdl_warn2 1 vhdl_showsource 0 vhdl_warn3 1 vhdl_0InOptions {} vhdl_warn4 1 vhdl_options {} vhdl_warn5 1 ood 0 compile_to work compile_order 8 cover_nosub 0 dont_compile 0 vhdl_use93 2002
Project_Sim_Count = 0
Project_Folder_Count = 0
Echo_Compile_Output = 0
Save_Compile_Report = 1
Project_Opt_Count = 0
ForceSoftPaths = 0
ReOpenSourceFiles = 1
VERILOG_DoubleClick = Edit
VERILOG_CustomDoubleClick = 
VHDL_DoubleClick = Edit
VHDL_CustomDoubleClick = 
PSL_DoubleClick = Edit
PSL_CustomDoubleClick = 
TEXT_DoubleClick = Edit
TEXT_CustomDoubleClick = 
SYSTEMC_DoubleClick = Edit
SYSTEMC_CustomDoubleClick = 
TCL_DoubleClick = Edit
TCL_CustomDoubleClick = 
MACRO_DoubleClick = Edit
MACRO_CustomDoubleClick = 
VCD_DoubleClick = Edit
VCD_CustomDoubleClick = 
SDF_DoubleClick = Edit
SDF_CustomDoubleClick = 
XML_DoubleClick = Edit
XML_CustomDoubleClick = 
LOGFILE_DoubleClick = Edit
LOGFILE_CustomDoubleClick = 
EditorState = {tabbed horizontal 1} {E:/studienarbeit/gff_int_mul/fadder.vhd 0 0} {{E:/Studium/studienarbeit/source code and script/pp_mult/pp_braun_ff_liu_optimized/braun_ff_mult.vhd} 0 0} {{E:/Studium/studienarbeit/source code and script/pp_mult/pp_braun_ff_liu_optimized/row0_type.vhd} 0 0} {{E:/Studium/studienarbeit/source code and script/pp_mult/pp_braun_ff_liu_optimized/top_mult_tb.vhd} 0 0} {{E:/Studium/studienarbeit/source code and script/pp_mult/pp_braun_ff_liu_optimized/row_type.vhd} 0 0} {E:/studienarbeit/gff_int_mul/mod8_1.vhd 0 0} {E:/studienarbeit/gff_int_mul/mod_teil.vhd 0 0} {E:/studienarbeit/gff_int_mul/add8_3.vhd 0 1}
Project_Major_Version = 6
Project_Minor_Version = 1