?? an_switch.rpt
字號:
70 - - A -- OUTPUT 0 1 0 0 star
60 - - C -- OUTPUT 0 1 0 0 switch
16 - - A -- OUTPUT 0 1 0 0 wait_en
Code:
s = Synthesized pin or logic cell
+ = Synchronous flipflop
/ = Slow slew-rate output
! = NOT gate push-back
r = Fitter-inserted logic cell
@ = Uses single-pin Clock Enable
& = Uses single-pin Output Enable
Device-Specific Information: e:\eda\an_switch.rpt
an_switch
** BURIED LOGIC **
Fan-In Fan-Out
IOC LC EC Row Col Primitive Code INP FBK OUT FBK Name
- 5 - A 17 DFFE + 0 0 1 0 flag0 (:7)
- 1 - A 08 DFFE + 0 0 1 0 flag1 (:8)
- 4 - C 20 DFFE + 0 0 1 0 flag2 (:9)
Code:
s = Synthesized pin or logic cell
+ = Synchronous flipflop
/ = Slow slew-rate output
! = NOT gate push-back
r = Fitter-inserted logic cell
p = Packed register
Device-Specific Information: e:\eda\an_switch.rpt
an_switch
** FASTTRACK INTERCONNECT UTILIZATION **
Row FastTrack Interconnect:
Global Left Half- Right Half-
FastTrack FastTrack FastTrack
Row Interconnect Interconnect Interconnect Input Pins Output Pins Bidir Pins
A: 1/ 96( 1%) 1/ 48( 2%) 0/ 48( 0%) 0/16( 0%) 2/16( 12%) 0/16( 0%)
B: 0/ 96( 0%) 0/ 48( 0%) 0/ 48( 0%) 0/16( 0%) 0/16( 0%) 0/16( 0%)
C: 0/ 96( 0%) 0/ 48( 0%) 1/ 48( 2%) 0/16( 0%) 1/16( 6%) 0/16( 0%)
Column FastTrack Interconnect:
FastTrack
Column Interconnect Input Pins Output Pins Bidir Pins
01: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
02: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
03: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
04: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
05: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
06: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
07: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
08: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
09: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
10: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
11: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
12: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
13: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
14: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
15: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
16: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
17: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
18: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
19: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
20: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
21: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
22: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
23: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
24: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
EA: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
Device-Specific Information: e:\eda\an_switch.rpt
an_switch
** CLOCK SIGNALS **
Type Fan-out Name
INPUT 1 star_in
INPUT 1 switch_in
INPUT 1 waiten_in
Device-Specific Information: e:\eda\an_switch.rpt
an_switch
** EQUATIONS **
star_in : INPUT;
switch_in : INPUT;
waiten_in : INPUT;
-- Node name is ':7' = 'flag0'
-- Equation name is 'flag0', location is LC5_A17, type is buried.
flag0 = DFFE(!flag0, GLOBAL( star_in), VCC, VCC, VCC);
-- Node name is ':8' = 'flag1'
-- Equation name is 'flag1', location is LC1_A8, type is buried.
flag1 = DFFE(!flag1, GLOBAL( waiten_in), VCC, VCC, VCC);
-- Node name is ':9' = 'flag2'
-- Equation name is 'flag2', location is LC4_C20, type is buried.
flag2 = DFFE(!flag2, GLOBAL( switch_in), VCC, VCC, VCC);
-- Node name is 'star'
-- Equation name is 'star', type is output
star = flag0;
-- Node name is 'switch'
-- Equation name is 'switch', type is output
switch = flag2;
-- Node name is 'wait_en'
-- Equation name is 'wait_en', type is output
wait_en = flag1;
Project Information e:\eda\an_switch.rpt
** COMPILATION SETTINGS & TIMES **
Processing Menu Commands
------------------------
Design Doctor = off
Logic Synthesis:
Synthesis Type Used = Multi-Level
Default Synthesis Style = NORMAL
Logic option settings in 'NORMAL' style for 'FLEX10K' family
CARRY_CHAIN = ignore
CARRY_CHAIN_LENGTH = 32
CASCADE_CHAIN = ignore
CASCADE_CHAIN_LENGTH = 2
DECOMPOSE_GATES = on
DUPLICATE_LOGIC_EXTRACTION = on
MINIMIZATION = full
MULTI_LEVEL_FACTORING = on
NOT_GATE_PUSH_BACK = on
REDUCE_LOGIC = on
REFACTORIZATION = on
REGISTER_OPTIMIZATION = on
RESYNTHESIZE_NETWORK = on
SLOW_SLEW_RATE = off
SUBFACTOR_EXTRACTION = on
IGNORE_SOFT_BUFFERS = on
USE_LPM_FOR_AHDL_OPERATORS = off
Other logic synthesis settings:
Automatic Global Clock = on
Automatic Global Clear = on
Automatic Global Preset = on
Automatic Global Output Enable = on
Automatic Fast I/O = off
Automatic Register Packing = off
Automatic Open-Drain Pins = on
Automatic Implement in EAB = off
Optimize = 5
Default Timing Specifications: None
Cut All Bidir Feedback Timing Paths = on
Cut All Clear & Preset Timing Paths = on
Ignore Timing Assignments = off
Functional SNF Extractor = off
Linked SNF Extractor = off
Timing SNF Extractor = on
Optimize Timing SNF = off
Generate AHDL TDO File = off
Fitter Settings = NORMAL
Use Quartus Fitter = on
Smart Recompile = off
Total Recompile = off
Interfaces Menu Commands
------------------------
EDIF Netlist Writer = off
Verilog Netlist Writer = off
VHDL Netlist Writer = off
Compilation Times
-----------------
Compiler Netlist Extractor 00:00:00
Database Builder 00:00:00
Logic Synthesizer 00:00:00
Partitioner 00:00:00
Fitter 00:00:01
Timing SNF Extractor 00:00:00
Assembler 00:00:00
-------------------------- --------
Total Time 00:00:01
Memory Allocated
-----------------
Peak memory allocated during compilation = 10,064K
?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -