/* $Id: xgpio_l.h,v 1.1 2006/02/16 23:28:46 moleres Exp $ *//********************************************************************************       XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"*       AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND*       SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,*       OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,*       APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION*       THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,*       AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE*       FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY*       WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE*       IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR*       REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF*       INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS*       FOR A PARTICULAR PURPOSE.**       (c) Copyright 2002 - 2004 Xilinx Inc.*       All rights reserved.*******************************************************************************//*****************************************************************************//**** @file xgpio_l.h** This header file contains identifiers and low-level driver functions (or* macros) that can be used to access the device.  The user should refer to the* hardware device specification for more details of the device operation.* High-level driver functions are defined in xgpio.h.** The macros that are available in this file use a multiply to calculate the* addresses of registers. The user can control whether that multiply is done* at run time or at compile time. A constant passed as the channel parameter* will cause the multiply to be done at compile time. A variable passed as the* channel parameter will cause it to occur at run time.** <pre>* MODIFICATION HISTORY:** Ver   Who  Date     Changes* ----- ---- -------- -----------------------------------------------* 1.00a jhl  04/24/02 First release of low level driver* 2.00a jhl  11/26/03 Added support for dual channels and interrupts. This*                     change required the functions to be changed such that*                     the interface is not compatible with previous versions.*                     See the examples in the example directory for macros*                     to help compile an application that was designed for*                     previous versions of the driver. The interrupt registers*                     are accessible using the ReadReg and WriteReg macros and*                     a channel parameter was added to the other macros.* </pre>*******************************************************************************/#ifndef XGPIO_L_H /* prevent circular inclusions */#define XGPIO_L_H /* by using protection macros */#ifdef __cplusplusextern "C" {#endif/***************************** Include Files *********************************/#include "xbasic_types.h"#include "xio.h"/************************** Constant Definitions *****************************//** @name Registers * * Register offsets for this device. This device utilizes IPIF interrupt * registers. * @{ */#define XGPIO_DATA_OFFSET  0x0  /**< Data register for 1st channel */#define XGPIO_TRI_OFFSET   0x4  /**< I/O direction register for 1st channel */#define XGPIO_DATA2_OFFSET 0x8  /**< Data register for 2nd channel */#define XGPIO_TRI2_OFFSET  0xC  /**< I/O direction register for 2nd channel */#define XGPIO_GIER_OFFSET  0x11C /**< Glogal interrupt enable register */#define XGPIO_ISR_OFFSET   0x120 /**< Interrupt status register */#define XGPIO_IER_OFFSET   0x128 /**< Interrupt enable register *//* @} *//* The following constant describes the offset of each channels data and * tristate register from the base address. */#define XGPIO_CHAN_OFFSET  8/** @name Interrupt Status and Enable Register bitmaps and masks * * Bit definitions for the interrupt status register and interrupt enable * registers. * @{ */#define XGPIO_IR_MASK        0x3 /**< Mask of all bits */#define XGPIO_IR_CH1_MASK    0x1 /**< Mask for the 1st channel */#define XGPIO_IR_CH2_MASK    0x2 /**< Mask for the 2nd channel *//*@}*//**************************** Type Definitions *******************************//***************** Macros (Inline Functions) Definitions *********************//****************************************************************************//**** Write a value to a GPIO register. A 32 bit write is performed. If the* GPIO component is implemented in a smaller width, only the least* significant data is written.** @param   BaseAddress is the base address of the GPIO device.* @param   RegOffset is the register offset from the base to write to.* @param   Data is the data written to the register.** @return  None.** @note    None.** C-style signature:*    void XGpio_mWriteReg(Xuint32 BaseAddress, unsigned RegOffset,*                         Xuint32 Data)*****************************************************************************/#define XGpio_mWriteReg(BaseAddress, RegOffset, Data) \    XIo_Out32((BaseAddress) + (RegOffset), (Xuint32)(Data))/****************************************************************************//**** Read a value from a GPIO register. A 32 bit read is performed. If the* GPIO component is implemented in a smaller width, only the least* significant data is read from the register. The most significant data* will be read as 0.** @param   BaseAddress is the base address of the GPIO device.* @param   Register is the register offset from the base to read from.* @param   Data is the data from the register.** @return  None.** @note    None.** C-style signature:*    Xuint32 XGpio_mReadReg(Xuint32 BaseAddress, unsigned RegOffset)*****************************************************************************/#define XGpio_mReadReg(BaseAddress, RegOffset) \    XIo_In32((BaseAddress) + (RegOffset))/******************************************************************************* Set the input/output direction of the signals of the specified GPIO channel.** @param    BaseAddress contains the base address of the GPIO device.* @param    Channel contains the channel (1 or 2) to operate on.* @param    DirectionMask is a bitmask specifying which discretes are input and*           which are output. Bits set to 0 are output and bits set to 1 are*           input.** @return   None.** @note     None.** C-style signature:*    void XGpio_mSetDataDirection(Xuint32 BaseAddress, unsigned Channel,*                                 Xuint32 DirectionMask)*******************************************************************************/#define XGpio_mSetDataDirection(BaseAddress, Channel, DirectionMask) \    XGpio_mWriteReg((BaseAddress), \                    (((Channel) - 1) * XGPIO_CHAN_OFFSET) + XGPIO_TRI_OFFSET, \                    (DirectionMask))/****************************************************************************//*** Get the data register of the specified GPIO channel.** @param    BaseAddress contains the base address of the GPIO device.* @param    Channel contains the channel (1 or 2) to operate on.** @return   The contents of the data register.** @note     None.** C-style signature:*    Xuint32 XGpio_mGetDataReg(Xuint32 BaseAddress, unsigned Channel)******************************************************************************/#define XGpio_mGetDataReg(BaseAddress, Channel) \    XGpio_mReadReg((BaseAddress), \                   (((Channel) - 1) * XGPIO_CHAN_OFFSET) + XGPIO_DATA_OFFSET)/****************************************************************************//*** Set the data register of the specified GPIO channel.** @param    BaseAddress contains the base address of the GPIO device.* @param    Channel contains the channel (1 or 2) to operate on.* @param    Data is the value to be written to the data register.** @return   None.** @note     None.** C-style signature:*    void XGpio_mSetDataReg(Xuint32 BaseAddress, unsigned Channel,*                           Xuint32 Data)******************************************************************************/#define XGpio_mSetDataReg(BaseAddress, Channel, Data) \    XGpio_mWriteReg((BaseAddress), \                    (((Channel) - 1) * XGPIO_CHAN_OFFSET) + XGPIO_DATA_OFFSET,\                    (Data))/************************** Function Prototypes ******************************//************************** Variable Definitions *****************************/#ifdef __cplusplus}#endif#endif            /* end of protection macro */