// megafunction wizard: %LPM_COUNTER%
// GENERATION: STANDARD
// VERSION: WM1.0
// MODULE: lpm_counter 

// ============================================================
// File Name: reset_counter.v
// Megafunction Name(s):
// 			lpm_counter
// ============================================================
// ************************************************************
// THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
// ************************************************************


//Copyright (C) 1991-2003 Altera Corporation
//Any  megafunction  design,  and related netlist (encrypted  or  decrypted),
//support information,  device programming or simulation file,  and any other
//associated  documentation or information  provided by  Altera  or a partner
//under  Altera's   Megafunction   Partnership   Program  may  be  used  only
//to program  PLD  devices (but not masked  PLD  devices) from  Altera.   Any
//other  use  of such  megafunction  design,  netlist,  support  information,
//device programming or simulation file,  or any other  related documentation
//or information  is prohibited  for  any  other purpose,  including, but not
//limited to  modification,  reverse engineering,  de-compiling, or use  with
//any other  silicon devices,  unless such use is  explicitly  licensed under
//a separate agreement with  Altera  or a megafunction partner.  Title to the
//intellectual property,  including patents,  copyrights,  trademarks,  trade
//secrets,  or maskworks,  embodied in any such megafunction design, netlist,
//support  information,  device programming or simulation file,  or any other
//related documentation or information provided by  Altera  or a megafunction
//partner, remains with Altera, the megafunction partner, or their respective
//licensors. No other licenses, including any licenses needed under any third
//party's intellectual property, are provided herein.


module reset_counter (
	clock,
	cnt_en,
	aclr,
	q,
	cout);

	input	  clock;
	input	  cnt_en;
	input	  aclr;
	output	[9:0]  q;
	output	  cout;

	wire  sub_wire0;
	wire [9:0] sub_wire1;
	wire  cout = sub_wire0;
	wire [9:0] q = sub_wire1[9:0];

	lpm_counter	lpm_counter_component (
				.aclr (aclr),
				.clock (clock),
				.cnt_en (cnt_en),
				.cout (sub_wire0),
				.q (sub_wire1));
	defparam
		lpm_counter_component.lpm_width = 10,
		lpm_counter_component.lpm_type = "LPM_COUNTER",
		lpm_counter_component.lpm_direction = "UP";


endmodule

// ============================================================
// CNX file retrieval info
// ============================================================
// Retrieval info: PRIVATE: nBit NUMERIC "10"
// Retrieval info: PRIVATE: Direction NUMERIC "0"
// Retrieval info: PRIVATE: CLK_EN NUMERIC "0"
// Retrieval info: PRIVATE: CNT_EN NUMERIC "1"
// Retrieval info: PRIVATE: ModulusCounter NUMERIC "0"
// Retrieval info: PRIVATE: ModulusValue NUMERIC "0"
// Retrieval info: PRIVATE: CarryIn NUMERIC "0"
// Retrieval info: PRIVATE: CarryOut NUMERIC "1"
// Retrieval info: PRIVATE: SCLR NUMERIC "0"
// Retrieval info: PRIVATE: SLOAD NUMERIC "0"
// Retrieval info: PRIVATE: SSET NUMERIC "0"
// Retrieval info: PRIVATE: SSET_ALL1 NUMERIC "1"
// Retrieval info: PRIVATE: SSETV NUMERIC "0"
// Retrieval info: PRIVATE: ACLR NUMERIC "1"
// Retrieval info: PRIVATE: ALOAD NUMERIC "0"
// Retrieval info: PRIVATE: ASET NUMERIC "0"
// Retrieval info: PRIVATE: ASET_ALL1 NUMERIC "1"
// Retrieval info: PRIVATE: ASETV NUMERIC "0"
// Retrieval info: CONSTANT: LPM_WIDTH NUMERIC "10"
// Retrieval info: CONSTANT: LPM_TYPE STRING "LPM_COUNTER"
// Retrieval info: CONSTANT: LPM_DIRECTION STRING "UP"
// Retrieval info: USED_PORT: clock 0 0 0 0 INPUT NODEFVAL clock
// Retrieval info: USED_PORT: q 0 0 10 0 OUTPUT NODEFVAL q[9..0]
// Retrieval info: USED_PORT: cnt_en 0 0 0 0 INPUT NODEFVAL cnt_en
// Retrieval info: USED_PORT: cout 0 0 0 0 OUTPUT NODEFVAL cout
// Retrieval info: USED_PORT: aclr 0 0 0 0 INPUT NODEFVAL aclr
// Retrieval info: CONNECT: @clock 0 0 0 0 clock 0 0 0 0
// Retrieval info: CONNECT: q 0 0 10 0 @q 0 0 10 0
// Retrieval info: CONNECT: @cnt_en 0 0 0 0 cnt_en 0 0 0 0
// Retrieval info: CONNECT: cout 0 0 0 0 @cout 0 0 0 0
// Retrieval info: CONNECT: @aclr 0 0 0 0 aclr 0 0 0 0
// Retrieval info: LIBRARY: lpm lpm.lpm_components.all