?? connector_pll.v
字號:
// megafunction wizard: %ALTCLKLOCK%
// GENERATION: STANDARD
// VERSION: WM1.0
// MODULE: altpll
// ============================================================
// File Name: connector_pll.v
// Megafunction Name(s):
// altpll
// ============================================================
// ************************************************************
// THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
//
// 4.2 Build 178 01/19/2005 SP 1 SJ Full Version
// ************************************************************
//Copyright (C) 1991-2005 Altera Corporation
//Any megafunction design, and related netlist (encrypted or decrypted),
//support information, device programming or simulation file, and any other
//associated documentation or information provided by Altera or a partner
//under Altera's Megafunction Partnership Program may be used only
//to program PLD devices (but not masked PLD devices) from Altera. Any
//other use of such megafunction design, netlist, support information,
//device programming or simulation file, or any other related documentation
//or information is prohibited for any other purpose, including, but not
//limited to modification, reverse engineering, de-compiling, or use with
//any other silicon devices, unless such use is explicitly licensed under
//a separate agreement with Altera or a megafunction partner. Title to the
//intellectual property, including patents, copyrights, trademarks, trade
//secrets, or maskworks, embodied in any such megafunction design, netlist,
//support information, device programming or simulation file, or any other
//related documentation or information provided by Altera or a megafunction
//partner, remains with Altera, the megafunction partner, or their respective
//licensors. No other licenses, including any licenses needed under any third
//party's intellectual property, are provided herein.
// synopsys translate_off
`timescale 1 ps / 1 ps
// synopsys translate_on
module connector_pll (
inclk0,
c0,
e0);
input inclk0;
output c0;
output e0;
wire [5:0] sub_wire0;
wire [3:0] sub_wire2;
wire [0:0] sub_wire6 = 1'h0;
wire [0:0] sub_wire1 = sub_wire0[0:0];
wire c0 = sub_wire1;
wire [0:0] sub_wire3 = sub_wire2[0:0];
wire e0 = sub_wire3;
wire sub_wire4 = inclk0;
wire [1:0] sub_wire5 = {sub_wire6, sub_wire4};
altpll altpll_component (
.inclk (sub_wire5),
.clk (sub_wire0),
.extclk (sub_wire2)
// synopsys translate_off
,
.activeclock (),
.areset (),
.clkbad (),
.clkena (),
.clkloss (),
.clkswitch (),
.enable0 (),
.enable1 (),
.extclkena (),
.fbin (),
.locked (),
.pfdena (),
.pllena (),
.scanaclr (),
.scanclk (),
.scandata (),
.scandataout (),
.scandone (),
.scanread (),
.scanwrite (),
.sclkout0 (),
.sclkout1 ()
// synopsys translate_on
);
defparam
altpll_component.clk0_duty_cycle = 50,
altpll_component.lpm_type = "altpll",
altpll_component.clk0_multiply_by = 9,
altpll_component.inclk0_input_frequency = 20000,
altpll_component.extclk0_duty_cycle = 50,
altpll_component.clk0_divide_by = 5,
altpll_component.extclk0_phase_shift = "0",
altpll_component.extclk0_divide_by = 1,
altpll_component.pll_type = "AUTO",
altpll_component.intended_device_family = "Cyclone",
altpll_component.operation_mode = "NORMAL",
altpll_component.extclk0_multiply_by = 1,
altpll_component.compensate_clock = "CLK0",
altpll_component.clk0_phase_shift = "0";
endmodule
// ============================================================
// CNX file retrieval info
// ============================================================
// Retrieval info: PRIVATE: MIRROR_CLK0 STRING "0"
// Retrieval info: PRIVATE: PHASE_SHIFT_UNIT0 STRING "deg"
// Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT0 STRING "MHz"
// Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_COMBO STRING "MHz"
// Retrieval info: PRIVATE: SPREAD_USE STRING "0"
// Retrieval info: PRIVATE: SPREAD_FEATURE_ENABLED STRING "0"
// Retrieval info: PRIVATE: GLOCKED_COUNTER_EDIT_CHANGED STRING "1"
// Retrieval info: PRIVATE: GLOCK_COUNTER_EDIT NUMERIC "10000"
// Retrieval info: PRIVATE: SRC_SYNCH_COMP_RADIO STRING "0"
// Retrieval info: PRIVATE: DUTY_CYCLE0 STRING "50.00000000"
// Retrieval info: PRIVATE: PHASE_SHIFT0 STRING "0.00000000"
// Retrieval info: PRIVATE: MULT_FACTOR0 NUMERIC "9"
// Retrieval info: PRIVATE: OUTPUT_FREQ_MODE0 STRING "0"
// Retrieval info: PRIVATE: SPREAD_PERCENT STRING "0.500"
// Retrieval info: PRIVATE: LOCKED_OUTPUT_CHECK STRING "0"
// Retrieval info: PRIVATE: PLL_ARESET_CHECK STRING "0"
// Retrieval info: PRIVATE: OUTPUT_FREQ6 STRING "100.000"
// Retrieval info: PRIVATE: STICKY_CLK0 STRING "1"
// Retrieval info: PRIVATE: BANDWIDTH STRING "1.000"
// Retrieval info: PRIVATE: BANDWIDTH_USE_CUSTOM STRING "0"
// Retrieval info: PRIVATE: DEVICE_SPEED_GRADE STRING "Any"
// Retrieval info: PRIVATE: SPREAD_FREQ STRING "300.000"
// Retrieval info: PRIVATE: BANDWIDTH_FEATURE_ENABLED STRING "0"
// Retrieval info: PRIVATE: LONG_SCAN_RADIO STRING "1"
// Retrieval info: PRIVATE: PLL_ENHPLL_CHECK NUMERIC "0"
// Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE_DIRTY NUMERIC "0"
// Retrieval info: PRIVATE: USE_CLKENA6 STRING "0"
// Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT6 STRING "ps"
// Retrieval info: PRIVATE: USE_CLK0 STRING "1"
// Retrieval info: PRIVATE: INCLK1_FREQ_EDIT_CHANGED STRING "1"
// Retrieval info: PRIVATE: SCAN_FEATURE_ENABLED STRING "0"
// Retrieval info: PRIVATE: ZERO_DELAY_RADIO STRING "0"
// Retrieval info: PRIVATE: PLL_PFDENA_CHECK STRING "0"
// Retrieval info: PRIVATE: CREATE_CLKBAD_CHECK STRING "0"
// Retrieval info: PRIVATE: INCLK1_FREQ_EDIT STRING "50.000"
// Retrieval info: PRIVATE: CUR_DEDICATED_CLK STRING "c0"
// Retrieval info: PRIVATE: PLL_FASTPLL_CHECK NUMERIC "0"
// Retrieval info: PRIVATE: MIRROR_CLK6 STRING "0"
// Retrieval info: PRIVATE: PHASE_SHIFT_UNIT6 STRING "deg"
// Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT6 STRING "MHz"
// Retrieval info: PRIVATE: ACTIVECLK_CHECK STRING "0"
// Retrieval info: PRIVATE: BANDWIDTH_FREQ_UNIT STRING "MHz"
// Retrieval info: PRIVATE: INCLK0_FREQ_UNIT_COMBO STRING "MHz"
// Retrieval info: PRIVATE: DUTY_CYCLE6 STRING "50.00000000"
// Retrieval info: PRIVATE: PHASE_SHIFT6 STRING "0.00000000"
// Retrieval info: PRIVATE: MULT_FACTOR6 NUMERIC "1"
// Retrieval info: PRIVATE: OUTPUT_FREQ_MODE6 STRING "0"
// Retrieval info: PRIVATE: GLOCKED_MODE_CHECK STRING "0"
// Retrieval info: PRIVATE: NORMAL_MODE_RADIO STRING "1"
// Retrieval info: PRIVATE: CUR_FBIN_CLK STRING "e0"
// Retrieval info: PRIVATE: STICKY_CLK6 STRING "1"
// Retrieval info: PRIVATE: DIV_FACTOR0 NUMERIC "5"
// Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_CHANGED STRING "1"
// Retrieval info: PRIVATE: HAS_MANUAL_SWITCHOVER STRING "1"
// Retrieval info: PRIVATE: EXT_FEEDBACK_RADIO STRING "0"
// Retrieval info: PRIVATE: PLL_AUTOPLL_CHECK NUMERIC "1"
// Retrieval info: PRIVATE: CLKLOSS_CHECK STRING "0"
// Retrieval info: PRIVATE: BANDWIDTH_USE_AUTO STRING "1"
// Retrieval info: PRIVATE: SHORT_SCAN_RADIO STRING "0"
// Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE STRING "500.000"
// Retrieval info: PRIVATE: USE_CLK6 STRING "1"
// Retrieval info: PRIVATE: CLKSWITCH_CHECK STRING "0"
// Retrieval info: PRIVATE: SPREAD_FREQ_UNIT STRING "KHz"
// Retrieval info: PRIVATE: PLL_ENA_CHECK STRING "0"
// Retrieval info: PRIVATE: INCLK0_FREQ_EDIT STRING "50.000"
// Retrieval info: PRIVATE: CNX_NO_COMPENSATE_RADIO STRING "0"
// Retrieval info: PRIVATE: INT_FEEDBACK__MODE_RADIO STRING "1"
// Retrieval info: PRIVATE: OUTPUT_FREQ0 STRING "100.000"
// Retrieval info: PRIVATE: PRIMARY_CLK_COMBO STRING "inclk0"
// Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "0"
// Retrieval info: PRIVATE: SACN_INPUTS_CHECK STRING "0"
// Retrieval info: PRIVATE: DEV_FAMILY STRING "Cyclone"
// Retrieval info: PRIVATE: DIV_FACTOR6 NUMERIC "1"
// Retrieval info: PRIVATE: LOCK_LOSS_SWITCHOVER_CHECK STRING "0"
// Retrieval info: PRIVATE: SWITCHOVER_COUNT_EDIT NUMERIC "1"
// Retrieval info: PRIVATE: SWITCHOVER_FEATURE_ENABLED STRING "0"
// Retrieval info: PRIVATE: BANDWIDTH_PRESET STRING "Low"
// Retrieval info: PRIVATE: GLOCKED_FEATURE_ENABLED STRING "0"
// Retrieval info: PRIVATE: USE_CLKENA0 STRING "0"
// Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT0 STRING "ps"
// Retrieval info: PRIVATE: CLKBAD_SWITCHOVER_CHECK STRING "0"
// Retrieval info: PRIVATE: BANDWIDTH_USE_PRESET STRING "0"
// Retrieval info: PRIVATE: PLL_LVDS_PLL_CHECK NUMERIC "0"
// Retrieval info: PRIVATE: DEVICE_FAMILY NUMERIC "11"
// Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
// Retrieval info: CONSTANT: CLK0_DUTY_CYCLE NUMERIC "50"
// Retrieval info: CONSTANT: LPM_TYPE STRING "altpll"
// Retrieval info: CONSTANT: CLK0_MULTIPLY_BY NUMERIC "9"
// Retrieval info: CONSTANT: INCLK0_INPUT_FREQUENCY NUMERIC "20000"
// Retrieval info: CONSTANT: EXTCLK0_DUTY_CYCLE NUMERIC "50"
// Retrieval info: CONSTANT: CLK0_DIVIDE_BY NUMERIC "5"
// Retrieval info: CONSTANT: EXTCLK0_PHASE_SHIFT STRING "0"
// Retrieval info: CONSTANT: EXTCLK0_DIVIDE_BY NUMERIC "1"
// Retrieval info: CONSTANT: PLL_TYPE STRING "AUTO"
// Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone"
// Retrieval info: CONSTANT: OPERATION_MODE STRING "NORMAL"
// Retrieval info: CONSTANT: EXTCLK0_MULTIPLY_BY NUMERIC "1"
// Retrieval info: CONSTANT: COMPENSATE_CLOCK STRING "CLK0"
// Retrieval info: CONSTANT: CLK0_PHASE_SHIFT STRING "0"
// Retrieval info: USED_PORT: c0 0 0 0 0 OUTPUT VCC "c0"
// Retrieval info: USED_PORT: @clk 0 0 6 0 OUTPUT VCC "@clk[5..0]"
// Retrieval info: USED_PORT: inclk0 0 0 0 0 INPUT GND "inclk0"
// Retrieval info: USED_PORT: @extclk 0 0 4 0 OUTPUT VCC "@extclk[3..0]"
// Retrieval info: USED_PORT: e0 0 0 0 0 OUTPUT VCC "e0"
// Retrieval info: CONNECT: @inclk 0 0 1 0 inclk0 0 0 0 0
// Retrieval info: CONNECT: c0 0 0 0 0 @clk 0 0 1 0
// Retrieval info: CONNECT: @inclk 0 0 1 1 GND 0 0 0 0
// Retrieval info: CONNECT: e0 0 0 0 0 @extclk 0 0 1 0
// Retrieval info: GEN_FILE: TYPE_NORMAL connector_pll.v TRUE FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL connector_pll.inc TRUE FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL connector_pll.cmp FALSE FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL connector_pll.bsf TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL connector_pll_inst.v FALSE FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL connector_pll_bb.v TRUE FALSE
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -