AUTOPTR1L = LSB( EP2FIFOBUF );      for(i=0;i<n;)      {         if(ClockBytes > 0)         {            BYTE m;            m = n-i;            if(ClockBytes < m) m = ClockBytes;            ClockBytes -= m;            i += m;                     if(WriteOnly) /* Shift out 8 bits from d */            {               while(m--) ShiftOut(XAUTODAT1);            }            else /* Shift in 8 bits at the other end  */            {               while(m--) OutputByte(ShiftInOut(XAUTODAT1));            }        }        else        {            BYTE d = XAUTODAT1;            WriteOnly = (d & bmBIT6) ? FALSE : TRUE;            if(d & bmBIT7)            {               /* Prepare byte transfer, do nothing else yet */               ClockBytes = d & 0x3F;            }            else            {               /* Set state of output pins */               TCK = (d & bmBIT0) ? 1 : 0;               TMS = (d & bmBIT1) ? 1 : 0;               TDI = (d & bmBIT4) ? 1 : 0;               /* Optionally read state of input pins and put it in output buffer */               if(!WriteOnly) OutputByte(2|TDO);            };            i++;         };      };      SYNCDELAY;      EP2BCL = 0x80; // Re-arm endpoint 2   };}BOOL TD_Suspend(void)          // Called before the device goes into suspend mode{   return(TRUE);}BOOL TD_Resume(void)          // Called after the device resumes{   return(TRUE);}//-----------------------------------------------------------------------------// Device Request hooks//   The following hooks are called by the end point 0 device request parser.//-----------------------------------------------------------------------------BOOL DR_GetDescriptor(void){   return(TRUE);}BOOL DR_SetConfiguration(void)   // Called when a Set Configuration command is received{   Configuration = SETUPDAT[2];   return(TRUE);            // Handled by user code}BOOL DR_GetConfiguration(void)   // Called when a Get Configuration command is received{   EP0BUF[0] = Configuration;   EP0BCH = 0;   EP0BCL = 1;   return(TRUE);            // Handled by user code}BOOL DR_SetInterface(void)       // Called when a Set Interface command is received{   AlternateSetting = SETUPDAT[2];   return(TRUE);            // Handled by user code}BOOL DR_GetInterface(void)       // Called when a Set Interface command is received{   EP0BUF[0] = AlternateSetting;   EP0BCH = 0;   EP0BCL = 1;   return(TRUE);            // Handled by user code}BOOL DR_GetStatus(void){   if(SETUPDAT[0]==0x40)   {      Running = 1;      return FALSE;   };   return(TRUE);}BOOL DR_ClearFeature(void){   return(TRUE);}BOOL DR_SetFeature(void){   return(TRUE);}BOOL DR_VendorCmnd(void){   if(SETUPDAT[1] == 0x90) // READ EEPROM   {      BYTE addr = (SETUPDAT[4]<<1) & 0x7F;      EP0BUF[0] = PROM[addr];      EP0BUF[1] = PROM[addr+1];   }   else   {      EP0BUF[0] = 0x36;      EP0BUF[1] = 0x83;   }   EP0BCH = 0;   EP0BCL = 2; // Arm endpoint with # bytes to transfer   EP0CS |= bmHSNAK; // Acknowledge handshake phase of device request   return(FALSE); // no error; command handled OK}//-----------------------------------------------------------------------------// USB Interrupt Handlers//   The following functions are called by the USB interrupt jump table.//-----------------------------------------------------------------------------// Setup Data Available Interrupt Handlervoid ISR_Sudav(void) interrupt 0{   GotSUD = TRUE;            // Set flag   EZUSB_IRQ_CLEAR();   USBIRQ = bmSUDAV;         // Clear SUDAV IRQ}// Setup Token Interrupt Handlervoid ISR_Sutok(void) interrupt 0{   EZUSB_IRQ_CLEAR();   USBIRQ = bmSUTOK;         // Clear SUTOK IRQ}void ISR_Sof(void) interrupt 0{   EZUSB_IRQ_CLEAR();   USBIRQ = bmSOF;            // Clear SOF IRQ}void ISR_Ures(void) interrupt 0{   if (EZUSB_HIGHSPEED())   {      pConfigDscr = pHighSpeedConfigDscr;      pOtherConfigDscr = pFullSpeedConfigDscr;   }   else   {      pConfigDscr = pFullSpeedConfigDscr;      pOtherConfigDscr = pHighSpeedConfigDscr;   }      EZUSB_IRQ_CLEAR();   USBIRQ = bmURES;         // Clear URES IRQ}void ISR_Susp(void) interrupt 0{   Sleep = TRUE;   EZUSB_IRQ_CLEAR();   USBIRQ = bmSUSP;}void ISR_Highspeed(void) interrupt 0{   if (EZUSB_HIGHSPEED())   {      pConfigDscr = pHighSpeedConfigDscr;      pOtherConfigDscr = pFullSpeedConfigDscr;   }   else   {      pConfigDscr = pFullSpeedConfigDscr;      pOtherConfigDscr = pHighSpeedConfigDscr;   }   EZUSB_IRQ_CLEAR();   USBIRQ = bmHSGRANT;}void ISR_Ep0ack(void) interrupt 0{}void ISR_Stub(void) interrupt 0{}void ISR_Ep0in(void) interrupt 0{}void ISR_Ep0out(void) interrupt 0{}void ISR_Ep1in(void) interrupt 0{}void ISR_Ep1out(void) interrupt 0{}void ISR_Ep2inout(void) interrupt 0{}void ISR_Ep4inout(void) interrupt 0{}void ISR_Ep6inout(void) interrupt 0{}void ISR_Ep8inout(void) interrupt 0{}void ISR_Ibn(void) interrupt 0{}void ISR_Ep0pingnak(void) interrupt 0{}void ISR_Ep1pingnak(void) interrupt 0{}void ISR_Ep2pingnak(void) interrupt 0{}void ISR_Ep4pingnak(void) interrupt 0{}void ISR_Ep6pingnak(void) interrupt 0{}void ISR_Ep8pingnak(void) interrupt 0{}void ISR_Errorlimit(void) interrupt 0{}void ISR_Ep2piderror(void) interrupt 0{}void ISR_Ep4piderror(void) interrupt 0{}void ISR_Ep6piderror(void) interrupt 0{}void ISR_Ep8piderror(void) interrupt 0{}void ISR_Ep2pflag(void) interrupt 0{}void ISR_Ep4pflag(void) interrupt 0{}void ISR_Ep6pflag(void) interrupt 0{}void ISR_Ep8pflag(void) interrupt 0{}void ISR_Ep2eflag(void) interrupt 0{}void ISR_Ep4eflag(void) interrupt 0{}void ISR_Ep6eflag(void) interrupt 0{}void ISR_Ep8eflag(void) interrupt 0{}void ISR_Ep2fflag(void) interrupt 0{}void ISR_Ep4fflag(void) interrupt 0{}void ISR_Ep6fflag(void) interrupt 0{}void ISR_Ep8fflag(void) interrupt 0{}void ISR_GpifComplete(void) interrupt 0{}void ISR_GpifWaveform(void) interrupt 0{}