?? tb_mc8051_tmrctr_sim.vhd
字號:
--------------------------------------------------------------------------------- ---- X X XXXXXX XXXXXX XXXXXX XXXXXX X ---- XX XX X X X X X X X XX ---- X X X X X X X X X X X X ---- X X X X X X X X X X X X ---- X X X X XXXXXX X X XXXXXX X ---- X X X X X X X X X ---- X X X X X X X X X ---- X X X X X X X X X X ---- X X XXXXXX XXXXXX XXXXXX XXXXXX X ---- ---- ---- O R E G A N O S Y S T E M S ---- ---- Design & Consulting ---- ----------------------------------------------------------------------------------- ---- Web: http://www.oregano.at/ ---- ---- Contact: mc8051@oregano.at ---- ----------------------------------------------------------------------------------- ---- MC8051 - VHDL 8051 Microcontroller IP Core ---- Copyright (C) 2001 OREGANO SYSTEMS ---- ---- This library is free software; you can redistribute it and/or ---- modify it under the terms of the GNU Lesser General Public ---- License as published by the Free Software Foundation; either ---- version 2.1 of the License, or (at your option) any later version. ---- ---- This library is distributed in the hope that it will be useful, ---- but WITHOUT ANY WARRANTY; without even the implied warranty of ---- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ---- Lesser General Public License for more details. ---- ---- Full details of the license can be found in the file LGPL.TXT. ---- ---- You should have received a copy of the GNU Lesser General Public ---- License along with this library; if not, write to the Free Software ---- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ---- --------------------------------------------------------------------------------------- Author: Roland H鰈ler---- Filename: tb_mc8051_tmrctr_sim.vhd---- Date of Creation: Mon Aug 9 12:14:48 1999---- Version: $Revision: 1.3 $---- Date of Latest Version: $Date: 2002/01/07 12:16:57 $------ Description: Module level testbench for the timer/counter unit.---------------------------------------------------------------------------------------architecture sim of tb_mc8051_tmrctr is type mode is (MODE0_timer, MODE0_timer_interrupt, MODE0_counter, MODE0_counter_interrupt, MODE1_timer, MODE1_timer_interrupt, MODE1_counter, MODE1_counter_interrupt, MODE2_timer, MODE2_timer_interrupt, MODE2_counter, MODE2_counter_interrupt, MODE3_timer, MODE3_timer_interrupt, MODE3_counter, MODE3_counter_interrupt, SIMULATION_ERROR); signal s_tmod, s_th0_out, s_tl0_out, s_th1_out, s_tl1_out, s_reload: std_logic_vector(7 downto 0); signal clk, reset, s_int0, s_int1, s_t0, s_t1, s_tcon_tr0, s_tcon_tr1, s_tf0, s_tf1, s_wt_en: std_logic; signal tmr_ctr0, tmr_ctr1: mode; signal s_wt : std_logic_vector (1 downto 0); begin i_mc8051_tmrctr : mc8051_tmrctr port map (clk => clk, -- tmrctr inputs reset => reset, int0_i => s_int0, int1_i => s_int1, t0_i => s_t0, t1_i => s_t1, tmod_i => s_tmod, tcon_tr0_i => s_tcon_tr0, tcon_tr1_i => s_tcon_tr1, reload_i => s_reload, wt_en_i => s_wt_en, wt_i => s_wt, th0_o => s_th0_out, -- tmrctr outputs tl0_o => s_tl0_out, th1_o => s_th1_out, tl1_o => s_tl1_out, tf0_o => s_tf0, tf1_o => s_tf1);p_run: processbegin--------------------------------------------------------------------------------- set start values and perform reset------------------------------------------------------------------------------- s_tmod <= conv_std_logic_vector(0,8); s_tcon_tr0 <= '0'; s_tcon_tr1 <= '0'; s_wt <= conv_std_logic_vector(0,2); s_wt_en <= '0'; s_reload <= conv_std_logic_vector(0,8); -- reload value reset <= '1'; wait for one_period + one_period/2 + 5 ns ; reset <= '0'; --------------------------------------------------------------------------------- Testing MODE 0---------------------------------------------------------------------------------------------------------------------------------------------------------------- set the two timer/counters in mode 0 as timers------------------------------------------------------------------------------- -- Perform reloads of tmr/ctr registers s_wt <= conv_std_logic_vector(0,2); -- TL0 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(253,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(1,2); -- TL1 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(253,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(2,2); -- TH0 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(31,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(3,2); -- TH1 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(31,8); -- reload value wait for one_period; s_wt_en <= '0'; s_tmod <= conv_std_logic_vector(0,8); -- "00000000" s_tcon_tr0 <= '1'; s_tcon_tr1 <= '1'; wait for one_period * 80; --------------------------------------------------------------------------------- set the two timer/counters in mode 0 as counters------------------------------------------------------------------------------- -- Perform reloads of tmr/ctr registers s_wt <= conv_std_logic_vector(0,2); -- TL0 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(252,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(1,2); -- TL1 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(252,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(2,2); -- TH0 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(31,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(3,2); -- TH1 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(31,8); -- reload value wait for one_period; s_wt_en <= '0'; s_tmod <= conv_std_logic_vector(68,8); -- "01000100" s_tcon_tr0 <= '1'; s_tcon_tr1 <= '1'; wait for one_period * 640; s_tcon_tr0 <= '0'; s_tcon_tr1 <= '0'; wait for one_period * 4;--------------------------------------------------------------------------------- set the two timer/counters in mode 0 as counters using interrupt inputs------------------------------------------------------------------------------- -- Perform reloads of tmr/ctr registers s_wt <= conv_std_logic_vector(0,2); -- TL0 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(253,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(1,2); -- TL1 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(253,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(2,2); -- TH0 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(31,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(3,2); -- TH1 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(31,8); -- reload value wait for one_period; s_wt_en <= '0'; s_tmod <= conv_std_logic_vector(204,8); -- "11001100" s_tcon_tr0 <= '1'; s_tcon_tr1 <= '1'; wait for one_period * 960; s_tcon_tr0 <= '0'; s_tcon_tr1 <= '0'; wait for one_period * 4; --------------------------------------------------------------------------------- set the two timer/counters in mode 0 as timers using interrupt inputs------------------------------------------------------------------------------- -- Perform reloads of tmr/ctr registers s_wt <= conv_std_logic_vector(0,2); -- TL0 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(252,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(1,2); -- TL1 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(252,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(2,2); -- TH0 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(31,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(3,2); -- TH1 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(31,8); -- reload value wait for one_period; s_wt_en <= '0'; s_tmod <= conv_std_logic_vector(136,8); -- "10001000" s_tcon_tr0 <= '1'; s_tcon_tr1 <= '1'; wait for one_period * 640; s_tcon_tr0 <= '0'; s_tcon_tr1 <= '0'; wait for one_period * 4; --------------------------------------------------------------------------------- Testing MODE 1---------------------------------------------------------------------------------------------------------------------------------------------------------------- set the two timer/counters in mode 1 as timers------------------------------------------------------------------------------- -- Perform reloads of tmr/ctr registers s_wt <= conv_std_logic_vector(0,2); -- TL0 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(252,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(1,2); -- TL1 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(252,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(2,2); -- TH0 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(255,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(3,2); -- TH1 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(255,8); -- reload value wait for one_period; s_wt_en <= '0'; s_tmod <= conv_std_logic_vector(17,8); -- "00010001" s_tcon_tr0 <= '1'; s_tcon_tr1 <= '1'; wait for one_period * 640; s_tcon_tr0 <= '0'; s_tcon_tr1 <= '0'; wait for one_period * 4;--------------------------------------------------------------------------------- set the two timer/counters in mode 1 as counters------------------------------------------------------------------------------- -- Perform reloads of tmr/ctr registers s_wt <= conv_std_logic_vector(0,2); -- TL0 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(254,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(1,2); -- TL1 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(254,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(2,2); -- TH0 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(255,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(3,2); -- TH1 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(255,8); -- reload value wait for one_period; s_wt_en <= '0'; s_tmod <= conv_std_logic_vector(85,8); -- "01010101" s_tcon_tr0 <= '1'; s_tcon_tr1 <= '1'; wait for one_period * 960; s_tcon_tr0 <= '0'; s_tcon_tr1 <= '0'; wait for one_period * 4;--------------------------------------------------------------------------------- set the two timer/counters in mode 1 as counters using interrupt inputs------------------------------------------------------------------------------- -- Perform reloads of tmr/ctr registers s_wt <= conv_std_logic_vector(0,2); -- TL0 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(252,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(1,2); -- TL1 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(252,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(2,2); -- TH0 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(255,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(3,2); -- TH1 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(255,8); -- reload value wait for one_period; s_wt_en <= '0'; s_tmod <= conv_std_logic_vector(221,8); -- "11011101" s_tcon_tr0 <= '1'; s_tcon_tr1 <= '1'; wait for one_period * 1280; s_tcon_tr0 <= '0'; s_tcon_tr1 <= '0'; wait for one_period * 4; --------------------------------------------------------------------------------- set the two timer/counters in mode 1 as timers using interrupt inputs------------------------------------------------------------------------------- -- Perform reloads of tmr/ctr registers s_wt <= conv_std_logic_vector(0,2); -- TL0 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(252,8); -- reload value wait for one_period; s_wt <= conv_std_logic_vector(1,2); -- TL1 s_wt_en <= '1'; s_reload <= conv_std_logic_vector(252,8); -- reload value?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -