?? pwm.vhd
字號:
LIBRARY IEEE;
USE IEEE.STD_LOGIC_1164.ALL;
USE IEEE.STD_LOGIC_UNSIGNED.ALL;
ENTITY pwm IS
PORT(clr:IN STD_LOGIC;
clk:IN STD_LOGIC;
txd,txd2,rxd_l,rxd2_l:IN STD_LOGIC;
rxd,rxd2,txd_l,txd2_l:OUT STD_LOGIC;
Ch_PWMA,Ch_PWMB: out STD_LOGIC_VECTOR(9 downto 0);
data: in STD_LOGIC_VECTOR(7 downto 0); --
address: in std_logic_vector(4 downto 0);
out_ena,out_enb: in std_logic;
nwe: in std_logic
);
END pwm;
ARCHITECTURE zas OF pwm IS
signal ChTimer1a,ChTimer1d: std_logic_vector(7 downto 0);
signal ChTimer2a,ChTimer2d: std_logic_vector(7 downto 0);
signal ChTimer3a,ChTimer3d: std_logic_vector(7 downto 0);
signal ChTimer4a,ChTimer4d: std_logic_vector(7 downto 0);
signal ChTimer5a,ChTimer5d: std_logic_vector(7 downto 0);
signal ChTimer6a,ChTimer6d: std_logic_vector(7 downto 0);
signal ChTimer7a,ChTimer7d: std_logic_vector(7 downto 0);
signal ChTimer8a,ChTimer8d: std_logic_vector(7 downto 0);
signal ChTimer9a,ChTimer9d: std_logic_vector(7 downto 0);
signal ChTimer10a,ChTimer10d: std_logic_vector(7 downto 0);
signal ChTmp1: std_logic_vector(8 downto 0);
signal ChTmp2: std_logic_vector(8 downto 0);
signal ChTmp3: std_logic_vector(8 downto 0);
signal ChTmp4: std_logic_vector(8 downto 0);
signal ChTmp5: std_logic_vector(8 downto 0);
signal ChTmp6: std_logic_vector(8 downto 0);
signal ChTmp7: std_logic_vector(8 downto 0);
signal ChTmp8: std_logic_vector(8 downto 0);
signal ChTmp9: std_logic_vector(8 downto 0);
signal ChTmp10: std_logic_vector(8 downto 0);
signal Timer :std_logic_vector(9 downto 0);
BEGIN
--串口要通過光藕,所以要反相一下
txd_l <= txd2;
txd2_l <= txd;
rxd <= rxd2_l;
rxd2 <= rxd_l;
--單片機寫操作
PROCESS(clk,nwe,data,address,clr)
BEGIN
if(nwe'event and nwe ='1')then -- nwe的上升沿
case address is
when "00000"=> ChTimer1a<=data(7 downto 0);
when "00001"=> ChTimer1d<=data(7 downto 0);
when "00010"=> ChTimer2a<=data(7 downto 0);
when "00011"=> ChTimer2d<=data(7 downto 0);
when "00100"=> ChTimer3a<=data(7 downto 0);
when "00101"=> ChTimer3d<=data(7 downto 0);
when "00110"=> ChTimer4a<=data(7 downto 0);
when "00111"=> ChTimer4d<=data(7 downto 0);
when "01000"=> ChTimer5a<=data(7 downto 0);
when "01001"=> ChTimer5d<=data(7 downto 0);
when "01010"=> ChTimer6a<=data(7 downto 0);
when "01011"=> ChTimer6d<=data(7 downto 0);
when "01100"=> ChTimer7a<=data(7 downto 0);
when "01101"=> ChTimer7d<=data(7 downto 0);
when "01110"=> ChTimer8a<=data(7 downto 0);
when "01111"=> ChTimer8d<=data(7 downto 0);
when "10000"=> ChTimer9a<=data(7 downto 0);
when "10001"=> ChTimer9d<=data(7 downto 0);
when "10010"=> ChTimer10a<=data(7 downto 0);
when "10011"=> ChTimer10d<=data(7 downto 0);
when others => null;
end case;
end if;
--系統復位后,將寄存器之0
-- if(clr='0') then
-- ChTimer1 <= "0000000000";
-- ChTimer2 <= "0000000000";
-- ChTimer3 <= "0000000000";
-- ChTimer4 <= "0000000000";
-- ChTimer5 <= "0000000000";
-- ChTimer6 <= "0000000000";
-- ChTimer7 <= "0000000000";
-- ChTimer8 <= "0000000000";
-- ChTimer9 <= "0000000000";
-- ChTimer10 <= "0000000000";
-- end if;
END PROCESS;
---debug <= Chtmp1(7 downto 0);
--以下用于調試,設定值自動遞增,正常時不使用。
-- process(clr,Timer(28))
-- begin
-- if(Timer(28)'event and Timer(28)='1') then -- dclk
-- ChTimer1 <= ChTimer1 +'1';
-- end if;
-- end process;
process(clk,clr)
begin
if(clk'event and clk='1') then -- dclk
Timer<=Timer+'1';
if((Timer(9 downto 0)="0000000000")or(Timer(9 downto 0)="0100000000")or(Timer(9 downto 0)="1000000000")) then -- 初始化處置
ChTmp1<='0'&ChTimer1a;
ChTmp2<='0'&ChTimer2a;
ChTmp3<='0'&ChTimer3a;
ChTmp4<='0'&ChTimer4a;
ChTmp5<='0'&ChTimer5a;
ChTmp6<='0'&ChTimer6a;
ChTmp7<='0'&ChTimer7a;
ChTmp8<='0'&ChTimer8a;
ChTmp9<='0'&ChTimer9a;
ChTmp10<='0'&ChTimer10a;
elsif(Timer(9 downto 0)="1100000000") then -- 初始化處置
ChTmp1<='0'&ChTimer1d;
ChTmp2<='0'&ChTimer2d;
ChTmp3<='0'&ChTimer3d;
ChTmp4<='0'&ChTimer4d;
ChTmp5<='0'&ChTimer5d;
ChTmp6<='0'&ChTimer6d;
ChTmp7<='0'&ChTimer7d;
ChTmp8<='0'&ChTimer8d;
ChTmp9<='0'&ChTimer9d;
ChTmp10<='0'&ChTimer10d;
else
ChTmp1<=ChTmp1+'1';
ChTmp2<=ChTmp2+'1';
ChTmp3<=ChTmp3+'1';
ChTmp4<=ChTmp4+'1';
ChTmp5<=ChTmp5+'1';
ChTmp6<=ChTmp6+'1';
ChTmp7<=ChTmp7+'1';
ChTmp8<=ChTmp8+'1';
ChTmp9<=ChTmp9+'1';
ChTmp10<=ChTmp10+'1';
end if;
end if;
end process;
Ch_PWMA(0) <= ChTmp1(8) and out_ena;
Ch_PWMA(1) <= ChTmp2(8) and out_ena;
Ch_PWMA(2) <= ChTmp3(8) and out_ena;
Ch_PWMA(3) <= ChTmp4(8) and out_ena;
Ch_PWMA(4) <= ChTmp5(8) and out_ena;
Ch_PWMA(5) <= ChTmp6(8) and out_ena;
Ch_PWMA(6) <= ChTmp7(8) and out_ena;
Ch_PWMA(7) <= ChTmp8(8) and out_ena;
Ch_PWMA(8) <= ChTmp9(8) and out_ena;
Ch_PWMA(9) <= ChTmp10(8) and out_ena;
Ch_PWMB(0) <= ChTmp1(8) and out_enb and (not out_ena);
Ch_PWMB(1) <= ChTmp2(8) and out_enb and (not out_ena);
Ch_PWMB(2) <= ChTmp3(8) and out_enb and (not out_ena);
Ch_PWMB(3) <= ChTmp4(8) and out_enb and (not out_ena);
Ch_PWMB(4) <= ChTmp5(8) and out_enb and (not out_ena);
Ch_PWMB(5) <= ChTmp6(8) and out_enb and (not out_ena);
Ch_PWMB(6) <= ChTmp7(8) and out_enb and (not out_ena);
Ch_PWMB(7) <= ChTmp8(8) and out_enb and (not out_ena);
Ch_PWMB(8) <= ChTmp9(8) and out_enb and (not out_ena);
Ch_PWMB(9) <= ChTmp10(8) and out_enb and (not out_ena);
END zas;
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -