{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0 "" 0 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 8.0 Build 215 05/29/2008 SJ Full Version " "Info: Version 8.0 Build 215 05/29/2008 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0 "" 0 0} { "Info" "IQEXE_START_BANNER_TIME" "Tue Oct 14 14:33:25 2008 " "Info: Processing started: Tue Oct 14 14:33:25 2008" {  } {  } 0 0 "Processing started: %1!s!" 0 0 "" 0 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0 "" 0 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off ppg -c ppg " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off ppg -c ppg" {  } {  } 0 0 "Command: %1!s!" 0 0 "" 0 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "ppg EP2C20F484C7 " "Info: Selected device EP2C20F484C7 for design \"ppg\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0 "" 0 0}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 0 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "" 0 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C15AF484C7 " "Info: Device EP2C15AF484C7 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C35F484C7 " "Info: Device EP2C35F484C7 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C50F484C7 " "Info: Device EP2C50F484C7 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "" 0 0}
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "3 " "Info: Fitter converted 3 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ASDO~ C4 " "Info: Pin ~ASDO~ is reserved at location C4" {  } { { "c:/eda/altera/v80/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/eda/altera/v80/quartus/bin/pin_planner.ppl" { ~ASDO~ } } } { "c:/eda/altera/v80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/eda/altera/v80/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~ASDO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~nCSO~ C3 " "Info: Pin ~nCSO~ is reserved at location C3" {  } { { "c:/eda/altera/v80/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/eda/altera/v80/quartus/bin/pin_planner.ppl" { ~nCSO~ } } } { "c:/eda/altera/v80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/eda/altera/v80/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~nCSO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~LVDS91p/nCEO~ W20 " "Info: Pin ~LVDS91p/nCEO~ is reserved at location W20" {  } { { "c:/eda/altera/v80/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/eda/altera/v80/quartus/bin/pin_planner.ppl" { ~LVDS91p/nCEO~ } } } { "c:/eda/altera/v80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/eda/altera/v80/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~LVDS91p/nCEO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0 0}  } {  } 0 0 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "" 0 0}
{ "Info" "ITDC_FITTER_TIMING_ENGINE" "TimeQuest " "Info: Fitter is using the TimeQuest Timing Analyzer" {  } {  } 0 0 "Fitter is using the %1!s! Timing Analyzer" 0 0 "" 0 0}
{ "Warning" "WTDB_ANALYZE_COMB_LATCHES" "" "Warning: Timing Analysis is analyzing one or more combinational loops as latches" { { "Warning" "WTDB_COMB_LATCH_NODE" "buf_next\|combout " "Warning: Node \"buf_next\|combout\" is a latch" {  } { { "ppg.vhd" "" { Text "G:/EEC 587 Rapid Digital System Prototyping/VHDL/ppg(real ab5 )/ppg.vhd" 16 -1 0 } }  } 0 0 "Node \"%1!s!\" is a latch" 0 0 "" 0 0}  } {  } 0 0 "Timing Analysis is analyzing one or more combinational loops as latches" 0 0 "" 0 0}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "ppg.sdc " "Critical Warning: Synopsys Design Constraints File file not found: 'ppg.sdc'. A Synopsys Design Constraints File is required by the TimeQuest Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." {  } {  } 1 0 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the TimeQuest Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "" 0 0}
{ "Info" "ISTA_DERIVE_CLOCKS_INFO" "Deriving Clocks " "Info: Deriving Clocks" { { "Info" "ISTA_DERIVE_CLOCKS_INFO" "create_clock -period 1.000 -name clk clk " "Info: create_clock -period 1.000 -name clk clk" {  } {  } 0 0 "%1!s!" 0 0 "" 0 0}  } {  } 0 0 "%1!s!" 0 0 "" 0 0}
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time." {  } {  } 0 0 "Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time." 0 0 "" 0 0}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "clk (placed in PIN L1 (CLK0, LVDSCLK0p, Input)) " "Info: Automatically promoted node clk (placed in PIN L1 (CLK0, LVDSCLK0p, Input))" { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock CLKCTRL_G2 " "Info: Automatically promoted destinations to use location or clock signal Global Clock CLKCTRL_G2" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0 "" 0 0}  } { { "c:/eda/altera/v80/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/eda/altera/v80/quartus/bin/pin_planner.ppl" { clk } } } { "c:/eda/altera/v80/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/eda/altera/v80/quartus/bin/Assignment Editor.qase" 1 { { 0 "clk" } } } } { "ppg.vhd" "" { Text "G:/EEC 587 Rapid Digital System Prototyping/VHDL/ppg(real ab5 )/ppg.vhd" 6 -1 0 } } { "c:/eda/altera/v80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/eda/altera/v80/quartus/bin/TimingClosureFloorplan.fld" "" "" { clk } "NODE_NAME" } }  } 0 0 "Automatically promoted node %1!s! %2!s!" 0 0 "" 0 0}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "reset (placed in PIN M1 (CLK2, LVDSCLK1p, Input)) " "Info: Automatically promoted node reset (placed in PIN M1 (CLK2, LVDSCLK1p, Input))" { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock CLKCTRL_G3 " "Info: Automatically promoted destinations to use location or clock signal Global Clock CLKCTRL_G3" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0 "" 0 0}  } { { "c:/eda/altera/v80/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/eda/altera/v80/quartus/bin/pin_planner.ppl" { reset } } } { "c:/eda/altera/v80/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/eda/altera/v80/quartus/bin/Assignment Editor.qase" 1 { { 0 "reset" } } } } { "ppg.vhd" "" { Text "G:/EEC 587 Rapid Digital System Prototyping/VHDL/ppg(real ab5 )/ppg.vhd" 6 -1 0 } } { "c:/eda/altera/v80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/eda/altera/v80/quartus/bin/TimingClosureFloorplan.fld" "" "" { reset } "NODE_NAME" } }  } 0 0 "Automatically promoted node %1!s! %2!s!" 0 0 "" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Info: Starting register packing" {  } {  } 0 0 "Starting register packing" 0 0 "" 0 0}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Extra Info: Performing register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Performing register packing on registers with non-logic cell location assignments" 1 0 "" 0 0}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Extra Info: Completed register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Completed register packing on registers with non-logic cell location assignments" 1 0 "" 0 0}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Extra Info: Started Fast Input/Output/OE register processing" {  } {  } 1 0 "Started Fast Input/Output/OE register processing" 1 0 "" 0 0}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Extra Info: Finished Fast Input/Output/OE register processing" {  } {  } 1 0 "Finished Fast Input/Output/OE register processing" 1 0 "" 0 0}
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Extra Info: Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" {  } {  } 1 0 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "" 0 0}