/********************************************************************** * Structures and arrays as task/function args * * Author: Stuart Sutherland * * (c) Copyright 2003, Sutherland HDL, Inc. *** ALL RIGHTS RESERVED *** * www.sutherland-hdl.com * * Used with permission in the book, "SystemVerilog for Design" *  By Stuart Sutherland, Simon Davidmann, and Peter Flake. *  Book copyright: 2003, Kluwer Academic Publishers, Norwell, MA, USA *  www.wkap.il, ISBN: 0-4020-7530-8 * * Revision History: *   1.00 15 Dec 2003 -- original code, as included in book *   1.01 10 Jul 2004 -- cleaned up comments, added expected results *                       to output messages * * Caveat: Expected results displayed for this code example are based * on an interpretation of the SystemVerilog 3.1 standard by the code * author or authors.  At the time of writing, official SystemVerilog * validation suites were not available to validate the example. * * RIGHT TO USE: This code example, or any portion thereof, may be * used and distributed without restriction, provided that this entire * comment block is included with the example. * * DISCLAIMER: THIS CODE EXAMPLE IS PROVIDED "AS IS" WITHOUT WARRANTY * OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED * TO WARRANTIES OF MERCHANTABILITY, FITNESS OR CORRECTNESS. IN NO * EVENT SHALL THE AUTHOR OR AUTHORS BE LIABLE FOR ANY DAMAGES, * INCLUDING INCIDENTAL OR CONSEQUENTIAL DAMAGES, ARISING OUT OF THE * USE OF THIS CODE. *********************************************************************/module test;  bit [7:0] data [0:7];  typedef struct packed {    bit valid;    bit [ 7:0] check;    bit [63:0] data;  } packet_t;  packet_t packet;  task fill_packet (    input  bit [7:0] data_in [0:7],  // array arg    output packet_t data_out );  // structure arg    for (int i=0; i<=7; i++) begin      data_out.data[(8*i)+:8] = data_in[i];      data_out.check[i] = ^data_in[i];    end    data_out.valid = 1;  endtask  initial begin    data[0]=4; data[1]=2; data[3]=1;    fill_packet(data, packet);    $display("\n packet.data  = %0d (expect 16777732)", packet.data);    $display(" packet.check = %b (expect 00001011)\n", packet.check);    $finish;  endendmodule