?? ac97.c

?? 嵌入式系統關于串口傳輸、觸摸屏、定時器、控制器、中斷處理、音頻控制等實驗代碼
?? C
?? 第 1 頁 / 共 2 頁
字號:
12 下一頁
#ifndef DEBUG_AC97
#define DEBUG_AC97
#endif

#include "stdio.h"
#include "stdlib.h"
#include "XsAc97CtrlApi.h"
#include "XsAc97Ctrl.h"
#include "dma.h"
#include "pcm.h"
#include "CS4201.h"

#include "UtilFunc.h"
#include "XsUartDrv.h"

#define PCM_OUT 0
#define PCM_IN	1

static	UINT32 channel = 3;
static	UINT32 channelin = 4;
void StopDMAALL(void);


extern unsigned char ppcm[];	// PCM data

void * Make16BytesAlign(void * ptr)
{
	unsigned p = (UINT32)ptr;
    void *ptr2;
	if (p & 0x0F)	
		ptr2 = (void *)((p & 0xFFFFFFF0) + 16);
	else			
		ptr2 = (void *)(p & 0xFFFFFFF0);
	return ptr2;
}
#ifndef DEBUG_AC97

#define LENGTH_OF_TRANS		0x00001000
#define PCMLength			470016
#define n8k					115  //(PCMLength/LENGTH_OF_TRANS)

XsDmaDescriptorGroupT  		PCMDesGrp[n8k+1];
#else
#define LENGTH_OF_TRANS		0x00001000
#define PCMLength			0x2000
#define n8k					2
    char DesArea[256]; //leave space for DMA descriptor
    char DesAreain[256]; //leave space for DMA descriptor
    XsDmaDescriptorGroupT *PCMDesGrp;
#endif

XsDmaDescriptorGroupT * initdesc(INT32 dir)
{
#ifndef DEBUG_AC97    
	INT32 i;
	XsDmaDescriptorGroupT * pdesc;
	unsigned char * ppcmout = (unsigned char *)Make16BytesAlign(ppcm);	// 16 byte align

    print_string("In initdesc\r\n");
	pdesc = (XsDmaDescriptorGroupT *)Make16BytesAlign(&PCMDesGrp);	

	for (i=0; i<n8k; i++)
	{
		pdesc->DDADR = (UINT32)(pdesc + 1);
		pdesc->DSADR = (UINT32)ppcmout;
		pdesc->DTADR = (UINT32)&(XsAc97CtrlRegsP->PCDR);		// audio transmit FIFO (0x40500040)
		// [31]		increment Src Addr
		// [28]		FLOWTRG
		// [17:16]	11b - 32 bytes Maxim Burst Size of each transfer
		// [15:14]	11b - Word Width
		// [12,0]	Length of transfer in bytes
		pdesc->DCMD = 0x9003C000 | LENGTH_OF_TRANS;
		pdesc ++;
		ppcmout += LENGTH_OF_TRANS;	// skip 8k bytes
	}
	pdesc --;
	pdesc->DDADR = (UINT32)pdesc;

    print_string("Dumping descriptor in initdesc\r\n");
    Dump_Bin((unsigned)pdesc,n8k*4);
	return (XsDmaDescriptorGroupT *)Make16BytesAlign(&PCMDesGrp);
#else
    INT32 i,j;
	XsDmaDescriptorGroupT * pdesc;
	unsigned short * ppcmout = (unsigned short *)Make16BytesAlign(ppcm);	// 16 byte align
/*    for (i=0,j=0;i<0x2000/sizeof(unsigned short);i++,j=(j+10)%1000)
    {
        ppcmout[i] = SampleTable[j]; //16K 480KHz sine data
    }
*/        

	if(dir==PCM_OUT)
	{
		PCMDesGrp = (XsDmaDescriptorGroupT *)Make16BytesAlign(DesArea);	
	    pdesc = PCMDesGrp;
		for (i=0; i<n8k; i++)
		{
			pdesc->DDADR = (UINT32)(pdesc);
			pdesc->DSADR = (UINT32)ppcmout;
			pdesc->DTADR = (UINT32)&(XsAc97CtrlRegsP->PCDR);		// audio transmit FIFO (0x40500040)
			// [31]		increment Src Addr
			// [28]		FLOWTRG
			// [17:16]	11b - 32 bytes Maxim Burst Size of each transfer
			// [15:14]	11b - Word Width
			// [12,0]	Length of transfer in bytes
			pdesc->DCMD = 0x9003C000 | LENGTH_OF_TRANS;
			pdesc++;
			ppcmout += LENGTH_OF_TRANS/sizeof(unsigned short);	// skip 8k bytes
		}
		pdesc--;
		pdesc->DDADR = (UINT32)PCMDesGrp;
	}
	else
	{
		PCMDesGrp = (XsDmaDescriptorGroupT *)Make16BytesAlign(DesAreain);	
	    pdesc = PCMDesGrp;
		for (i=0; i<n8k; i++)
		{
			pdesc->DDADR = (UINT32)(pdesc);
			pdesc->DSADR = (UINT32)&(XsAc97CtrlRegsP->PCDR);
			pdesc->DTADR = (UINT32)ppcmout;		// audio transmit FIFO (0x40500040)
			// [31]		increment Src Addr
			// [28]		FLOWTRG
			// [17:16]	11b - 32 bytes Maxim Burst Size of each transfer
			// [15:14]	11b - Word Width
			// [12,0]	Length of transfer in bytes
			pdesc->DCMD = 0x6003C000 | LENGTH_OF_TRANS;
			pdesc++;
			ppcmout += LENGTH_OF_TRANS/sizeof(unsigned short);	// skip 8k bytes
		}
		pdesc--;
		pdesc->DDADR = (UINT32)PCMDesGrp;
	}		
	return PCMDesGrp;
#endif    
}


void startdma(UINT32 channel)
{
	XsDmaControlRegsP->DCSR[channel] |= 0x80000000;	// RUN = 1
}

void stopdma(UINT32 channel)
{
	XsDmaControlRegsP->DCSR[channel] &= ~0x80000000;	// RUN = 0
}

//Mic In Loopback


UINT32 initac97audiocodec_micinloopback()
{
	UINT32 status;
	
	// disable loopback mode
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_GPR, 0);
	if (status)	return status;

	// SL[10:8] 000=Mic In L; SR[2:0] 000=Mic In R
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_RSR, UCB_RSR_SR_MIC | UCB_RSR_SL_MIC);
	if (status)	return status;
	
	//set record gain
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_RGR, 0x0707);
	if (status)	return status;

	//enable Variable Rate Audio mode
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_EASCR, UCB_EAIDR_VRA);
	if (status)	return status;

	//48 kHz
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_ADR, UCB_DR_48000);
	if (status)	return status;
	
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_AAR, UCB_DR_48000);
	if (status)	return status;

	//set volume: bit13~8 - ML; bit5~0 - MR
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_MVR, 0x303); 
	if (status)	return status;
	
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_HVR, 0x303); 
	if (status)	return status;
	
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_MNVR, 0x303); 
	if (status)	return status;
	
	//Mute PCM out
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_POUTVR, 0x8303); 
	if (status)	return status;

	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_MICVR, 0x003 | MICVR_20DB); 
	if (status)	return status;

	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_MCCR,  MCCR_10DB); 
	if (status)	return status;

	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_ACMCR,  ACMCR_DDM); 
	if (status)	return status;
	// enable loopback mode
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_GPR, GPR_LPBK);
	if (status)	return status;
	return status;
}

void MicInLoopback(void)
{
	UINT32 DDADR, DSADR, DTADR, DCMD, tmp;
	XsDmaDescriptorGroupT * pdesc;
    
	StopDMAALL();
    PrintfUartDef("Mic In Loopback!\r\n");
	
	PrintfUartDef("     To init AC97 codec\r\n");
	initac97audiocodec_micinloopback();
	return;
	while (1);
	
	// The below code is for debug
restart:
	XsAc97CtrlRegsP->POSR |= 0x00000010;
	tmp = XsDmaControlRegsP->DCSR[channel];
	tmp = XsDmaControlRegsP->DCSR[channel] & 0x08;
	if (tmp)
	{
		startdma(channel);
		while (XsDmaControlRegsP->DCSR[channel] & 0x08)
		{
			DDADR = XsDmaControlRegsP->DDG[channel].DDADR;
			DSADR = XsDmaControlRegsP->DDG[channel].DSADR;
			DTADR = XsDmaControlRegsP->DDG[channel].DTADR;
			DCMD = XsDmaControlRegsP->DDG[channel].DCMD;
			PrintfUartDef("dma not run\n\t[DDADR]0x%x\n\t[DSADR]0x%x\n\t[DTADR]0x%x\n\t[DCMD]0x%x\n", DDADR, DSADR, DTADR, DCMD);
		}
	}
	
	Util_DelayUs(1);
	if (XsDmaControlRegsP->DCSR[channel] & 0x08)
	{
		DDADR = XsDmaControlRegsP->DDG[channel].DDADR;
		PrintfUartDef("dma stops: [DDADR]0x%x\n", DDADR);
	}
	if (XsAc97CtrlRegsP->POSR & 0x00000010)
	{
		//XsDmaControlRegsP->DCSR[channel] &= 0x7FFFFFFF;	// RUN = 0
		//while (!(XsDmaControlRegsP->DCSR[channel] & 0x08))	DM_WaitUs(1);
		DDADR = XsDmaControlRegsP->DDG[channel].DDADR;
		DSADR = XsDmaControlRegsP->DDG[channel].DSADR;
		DTADR = XsDmaControlRegsP->DDG[channel].DTADR;
		DCMD = XsDmaControlRegsP->DDG[channel].DCMD;
		tmp = XsDmaControlRegsP->DCSR[channel];
		PrintfUartDef("fifo error:\n\t[DDADR]0x%x\n\t[DSADR]0x%x\n\t[DTADR]0x%x\n\t[DCMD]0x%x\n", DDADR, DSADR, DTADR, DCMD);
	}
	goto restart;
}




//Mic In DMA Loopback
UINT32 initac97audiocodec_micindmaloopback() 
{
	UINT32 status;
	
	// disable loopback mode
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_GPR, 0);
	if (status)	return status;

	// SL[10:8] 000=Mic In L; SR[2:0] 000=Mic In R
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_RSR, 0);
	if (status)	return status;
	
	//set record gain
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_RGR, 0x0707);
	if (status)	return status;

	//enable Variable Rate Audio mode
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_EASCR, UCB_EAIDR_VRA);
	if (status)	return status;

	//48 kHz
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_ADR, UCB_DR_48000);
	if (status)	return status;
	
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_AAR, UCB_DR_48000);
	if (status)	return status;

	//set volume: bit13~8 - ML; bit5~0 - MR
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_MVR, 0x303); 
	if (status)	return status;
	
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_HVR, 0x303); 
	if (status)	return status;
	
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_MNVR, 0x303); 
	if (status)	return status;
	
	//Mute PCM out
	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_POUTVR, 0x8303); 
	if (status)	return status;

	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_MICVR, 0x003 | MICVR_20DB); 
	if (status)	return status;

	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_GPR,  0x0000); 
	if (status)	return status;

	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_MCCR,  MCCR_10DB); 
	if (status)	return status;

	status = XsAc97CtrlWriteCodecReg(XS_AC97CTRL_CM_ID_PRI_CODEC, 
		UCB_ACMCR,  ACMCR_DDM); 
	if (status)	return status;
	// enable loopback mode
	return status;
}

void MicInDMALoopback(void)
{
	UINT32 DDADR, DSADR, DTADR, DCMD, tmp;
	XsDmaDescriptorGroupT * pdesc;
	XsDmaDescriptorGroupT * pdescin;
    
	StopDMAALL();

    PrintfUartDef("Mic In DMA Loopback!\r\n");
    pdesc = initdesc(PCM_OUT);
	if (!pdesc)	
		return;
    pdescin = initdesc(PCM_IN);
	if (!pdescin)	
		return;
	
	PrintfUartDef("     To init AC97 codec\r\n");
	initac97audiocodec_micindmaloopback();

	PrintfUartDef("     To init AC97 dma\r\n");
	
	//Waiting for current DMA End	
  	tmp = XsDmaControlRegsP->DCSR[channel];
	XsDmaControlRegsP->DCSR[channel] &= 0x7FFFFFFF;	// RUN = 0

	tmp = 0;
    PrintfUartDef("     Waiting channel to be not busy (channel %d)\r\n",channel);
	while (!tmp)
	{
		tmp = XsDmaControlRegsP->DCSR[channel] & 0x08;
		Util_DelayUs(1);
	}
	PrintfUartDef("     Channel vacant\r\n");
	XsDmaControlRegsP->DCSR[channel] = 0x00000008;
	XsDmaControlRegsP->DDG[channel].DDADR = ((UINT32)pdesc);// | 0xA0000001;
	XsDmaControlRegsP->DRCMR[XSDMA_DRCMR_ID_AC97_AUDIO_TX] = channel | 0x080u;
	
	//Waiting for current DMA End	
  	tmp = XsDmaControlRegsP->DCSR[channelin];
	XsDmaControlRegsP->DCSR[channelin] &= 0x7FFFFFFF;	// RUN = 0

	tmp = 0;
    PrintfUartDef("     Waiting channel to be not busy (channelin %d)\r\n",channelin);
	while (!tmp)
	{
		tmp = XsDmaControlRegsP->DCSR[channelin] & 0x08;
		Util_DelayUs(1);
	}
	PrintfUartDef("     Channel vacant\r\n");
	XsDmaControlRegsP->DCSR[channelin] = 0x00000008;
	XsDmaControlRegsP->DDG[channelin].DDADR = ((UINT32)(pdescin));// | 0xA0000001;
	XsDmaControlRegsP->DRCMR[XSDMA_DRCMR_ID_AC97_AUDIO_RX] = channelin | 0x080u;

	XsAc97CtrlRegsP->POSR |= 0x00000010;
	
	PrintfUartDef("     To start dma\r\n");
	startdma(channelin);
	startdma(channel);
	
	PrintfUartDef("Exit playpcm\r\n");
	return;
	while (1);
	
	// The below code is for debug
restart:
	XsAc97CtrlRegsP->POSR |= 0x00000010;
	tmp = XsDmaControlRegsP->DCSR[channel];
	tmp = XsDmaControlRegsP->DCSR[channel] & 0x08;
	if (tmp)
	{
		startdma(channel);
		while (XsDmaControlRegsP->DCSR[channel] & 0x08)
		{
			DDADR = XsDmaControlRegsP->DDG[channel].DDADR;
			DSADR = XsDmaControlRegsP->DDG[channel].DSADR;
			DTADR = XsDmaControlRegsP->DDG[channel].DTADR;
			DCMD = XsDmaControlRegsP->DDG[channel].DCMD;
			PrintfUartDef("dma not run\n\t[DDADR]0x%x\n\t[DSADR]0x%x\n\t[DTADR]0x%x\n\t[DCMD]0x%x\n", DDADR, DSADR, DTADR, DCMD);
12 下一頁
?? 文件大小 5997 K
?? 上傳用戶 angela5683
?? 所屬分類其他嵌入式/單片機內容
??? 相關標簽

#嵌入式系統 #串口 #中斷處理 #傳輸
?? 快捷鍵說明

復制代碼 Ctrl + C
搜索代碼 Ctrl + F
全屏模式 F11
切換主題 Ctrl + Shift + D
顯示快捷鍵 ?
增大字號 Ctrl + =
減小字號 Ctrl + -
亚洲欧美第一页_禁久久精品乱码_粉嫩av一区二区三区免费野_久草精品视频

?? ac97.c

?? 快捷鍵說明
