--****************************************************************************************************
-- Address decoder and write enable logic for ARM core simualtion
-- Designed by Ruslan Lepetenok
-- Modified 11.01.2003
--****************************************************************************************************
library	IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;

use Work.ARMSMSSPackage.all;
use WORK.ARMPackage.all;

entity Decoder is 	 generic(AddressA : std_logic_vector(DecoderAdrWidth-1 downto 0);
	                         AddressB : std_logic_vector(DecoderAdrWidth-1 downto 0);
	                         AddressC : std_logic_vector(DecoderAdrWidth-1 downto 0);
	                         AddressD : std_logic_vector(DecoderAdrWidth-1 downto 0)
	                         );
	                 port 
	                      (
						   -- Address class signals 
						   ADDR_In   : in  std_logic_vector(31 downto 0);
						   WRITE_In  : in  std_logic;
						   SIZE_In   : in  std_logic_vector(1 downto 0);
						   -- Outputs
						   SelDevA	 : out std_logic;
						   SelDevB	 : out std_logic;
						   SelDevC	 : out std_logic;
						   SelDevD	 : out std_logic;
						   ByteWE	 : out std_logic_vector(3 downto 0)
						 );
end Decoder;

architecture RTL of Decoder is
begin

-- SIZE[1:0]  Transfer Width
--   00           Byte	
--	 01			  Halfword
--	 10			  Word
--   11			  Reserved
	

ByteWE(0) <= '1' when WRITE_In= '1' and ((ADDR_In(1 downto 0)="00" and SIZE_In=CTS_B)or
                      (ADDR_In(1)='0'and SIZE_In=CTS_HW)or
					   SIZE_In=CTS_W) else '0';

ByteWE(1) <= '1' when WRITE_In= '1' and ((ADDR_In(1 downto 0)="01" and SIZE_In=CTS_B)or
                      (ADDR_In(1)='0'and SIZE_In=CTS_HW)or
					   SIZE_In=CTS_W) else '0';

ByteWE(2) <= '1' when WRITE_In= '1' and ((ADDR_In(1 downto 0)="10" and SIZE_In=CTS_B)or
                      (ADDR_In(1)='1'and SIZE_In=CTS_HW)or
					   SIZE_In=CTS_W) else '0';						   
						   
ByteWE(3) <= '1' when WRITE_In= '1' and ((ADDR_In(1 downto 0)="11" and SIZE_In=CTS_B)or
                      (ADDR_In(1)='1'and SIZE_In=CTS_HW)or
					   SIZE_In=CTS_W) else '0';
						   
						   
SelDevA <= '1' when AddressA=ADDR_In(ADDR_In'high downto ADDR_In'length-DecoderAdrWidth) else '0'; 
SelDevB <= '1' when AddressB=ADDR_In(ADDR_In'high downto ADDR_In'length-DecoderAdrWidth) else '0'; 
SelDevC <= '1' when AddressC=ADDR_In(ADDR_In'high downto ADDR_In'length-DecoderAdrWidth) else '0';
SelDevD <= '1' when AddressD=ADDR_In(ADDR_In'high downto ADDR_In'length-DecoderAdrWidth) else '0'; 	
	
end RTL;