//`include "F:\jeffie\quartus\lcdfinal\LCD_Controller.v"

module	LCD_TEST_wrong (	//	Host Side
					iCLK,iRST_N,
					//	LCD Side
					LCD_DATA,LCD_RW,LCD_EN,LCD_RS	);
//	Host Side
input	  iCLK;//	輸入時鐘為50M
input 	  iRST_N;//
//	LCD Side
output	[7:0]	LCD_DATA;
output			LCD_RW,LCD_EN,LCD_RS;
//	Internal Wires/Registers
reg	[5:0]	LUT_INDEX;
reg	[8:0]	LUT_DATA;
reg	[5:0]	mLCD_ST;			//LCD state register
reg	[17:0]	mDLY;				//delay register
reg			mLCD_Start;
reg	[7:0]	mLCD_DATA;
reg			mLCD_RS;
wire		mLCD_Done;

parameter	LCD_INTIAL	=	0;
parameter	LCD_LINE1	=	5;							//前5個LUT的數據用于初始化，
																			//故第一行的數據從LUT_INDEX=5開始
parameter	LCD_CH_LINE	=	LCD_LINE1+16;	//換行索引
parameter	LCD_LINE2	=	LCD_LINE1+16+1;	//第二行的起始索引
parameter	LUT_SIZE	=	LCD_LINE1+32+1;//查找表的大小


always@(posedge iCLK or negedge iRST_N)
begin
	if(!iRST_N)				//reset
	begin
		LUT_INDEX	<=	0;
		mLCD_ST		<=	0;
		mDLY		<=	0;
		mLCD_Start	<=	0;
		mLCD_DATA	<=	0;
		mLCD_RS		<=	0;
	end
	else
	begin
		if(LUT_INDEX<LUT_SIZE)		//LUT_SIZE	=	LCD_LINE1+32+1;	LCD_LINE1	=	5;
		begin
			case(mLCD_ST)
			0:	begin
					mLCD_DATA	<=	LUT_DATA[7:0];
					mLCD_RS		<=	LUT_DATA[8];
					mLCD_Start	<=	1;
					mLCD_ST		<=	1;
				end
			1:	begin
					if(mLCD_Done)
					begin
						mLCD_Start	<=	0;
						mLCD_ST		<=	2;					
					end
				end
			2:	begin
					if(mDLY<18'h3FFFE)		//顯示延時5.24ms
					//if(mDLY<18'h3)		
					mDLY	<=	mDLY+1;
					else
					begin
						mDLY	<=	0;
						mLCD_ST	<=	3;
					end
				end
			3:	begin
					LUT_INDEX	<=	LUT_INDEX+1;	//訪問下一個查找表（的數據）
					mLCD_ST	<=	0;
				end
			endcase
		end
	end
end

always @(LUT_INDEX)//@(posedge iCLK )
begin
	case(LUT_INDEX)
	//	Initial
	LCD_INTIAL+0:	LUT_DATA	<=	9'h038;		//Function Set：
																				/*9'h038=9'b0_0011_1000:
																					位4：1，顯示數據長度為：8 bit;
																					位3：1，顯示2行
																					位2：0，顯示點陣為5*8
																					位1、位0：無關位*/
	LCD_INTIAL+1:	LUT_DATA	<=	9'h00C;		//Display ON/OFF Control
																				/*9'h00C=9'b0_0000_1100:
																					位2：1，打開顯示
																					位1：1，顯示光標
																					位0：0，光標不閃爍*/
	LCD_INTIAL+2:	LUT_DATA	<=	9'h001;		//Clear Display
	LCD_INTIAL+3:	LUT_DATA	<=	9'h006;		//Entry Mode Set
																				/*9'h006=9'b0_0000_0110:
																					TOTEST*/
	LCD_INTIAL+4:	LUT_DATA	<=	9'h080;		//Set DDRAM Address
																				/*設置DDRAM 的地址：AC（address counter）=0*/
	//	Line 1   //	Welcome!
	LCD_LINE1+0:	LUT_DATA	<=	9'h120;	   //" " blank
	LCD_LINE1+1:	LUT_DATA	<=	9'h120;	   //" " blank
	LCD_LINE1+2:	LUT_DATA	<=	9'h120;	   //" " blank
	LCD_LINE1+3:	LUT_DATA	<=	9'h120;	   //" " blank
	LCD_LINE1+4:	LUT_DATA	<=	9'h157;   //W
	LCD_LINE1+5:	LUT_DATA	<=	9'h165;   //e
	LCD_LINE1+6:	LUT_DATA	<=	9'h16C;   //l
	LCD_LINE1+7:	LUT_DATA	<=	9'h163;   //c
	LCD_LINE1+8:	LUT_DATA	<=	9'h16F;   //o
	LCD_LINE1+9:	LUT_DATA	<=	9'h16D;   //m
	LCD_LINE1+10:	LUT_DATA	<=	9'h165;   //e
	LCD_LINE1+11:	LUT_DATA	<=	9'h121;   //!
	LCD_LINE1+12:	LUT_DATA	<=	9'h120;   //" "
	LCD_LINE1+13:	LUT_DATA	<=	9'h120;   //" "
	LCD_LINE1+14:	LUT_DATA	<=	9'h120;   //" "
	LCD_LINE1+15:	LUT_DATA	<=	9'h120;   //" "
	//	Change Line
	LCD_CH_LINE:	LUT_DATA	<=	9'h0C0;   //change line instruction
	//	Line 2
	LCD_LINE2+0:	LUT_DATA	<=	9'h153;	//	S
	LCD_LINE2+1:	LUT_DATA	<=	9'h174;//t
	LCD_LINE2+2:	LUT_DATA	<=	9'h161;//a
	LCD_LINE2+3:	LUT_DATA	<=	9'h174;//t
	LCD_LINE2+4:	LUT_DATA	<=	9'h165;//e
	LCD_LINE2+5:	LUT_DATA	<=	9'h13A;//:
	LCD_LINE2+6:	LUT_DATA	<=	9'h120;//
	LCD_LINE2+7:	LUT_DATA	<=	9'h120;//
	LCD_LINE2+8:	LUT_DATA	<=	9'h120;//
	LCD_LINE2+9:	LUT_DATA	<=	9'h120;//
	LCD_LINE2+10:	LUT_DATA	<=	9'h14C;//
	LCD_LINE2+11:	LUT_DATA	<=	9'h14F;//
	LCD_LINE2+12:	LUT_DATA	<=	9'h143;//
	LCD_LINE2+13:	LUT_DATA	<=	9'h14B;//
	LCD_LINE2+14:	LUT_DATA	<=	9'h145;//
	LCD_LINE2+15:	LUT_DATA	<=	9'h144;//
	default:		LUT_DATA	<=	9'h000;//
	endcase
end

LCD_Controller 		u0	(	//	Host Side
							.iDATA(mLCD_DATA),
							.iRS(mLCD_RS),
							.iStart(mLCD_Start),
							.oDone(mLCD_Done),
							.iCLK(iCLK),
							.iRST_N(iRST_N),
							//	LCD Interface
							.LCD_DATA(LCD_DATA),
							.LCD_RW(LCD_RW),
							.LCD_EN(LCD_EN),
							.LCD_RS(LCD_RS)	);

endmodule