IF (V42 == 1) THEN GOTO L25;
CALL L31;
IF (!V76) THEN GOTO L22;
A18[9..0] = $003;
V4 = 32;
CALL L276;
L22:
A18[9..0] = $079;
V4 = 1 | 2;
CALL L276;
WAIT 10000 USEC;
A18[9..0] = $006;
V4 = 256;
CALL L276;
A18[9..0] = $04A;
V4 = 512;
CALL L276;
WAIT 10000 USEC;
L23:
IF (!V76) THEN GOTO L24;
V80 = 0;
CALL L32;
IF (V42 != 0) THEN V42 = 10;
IF (V42 != 0) THEN GOTO L25;
L24:
A18[9..0] = $3FF;
CALL L276;
IF (V105) THEN CALL L35;
L25:
IF (V42 == 0) THEN
PRINT "DONE";
IF (V42 == 1) THEN
PRINT "Invalid option combination specified";
IF (V42 == 6) THEN
PRINT "Unrecognized device";
IF (V42 == 7) THEN
PRINT "Device revision is not supported";
IF (V42 == 10) THEN
PRINT "Device programming failure";
IF (V42 == 9) THEN
PRINT "Device is not blank";
IF (V42 == 11) THEN
PRINT "Device verify failure";
IF (V42 == 10) THEN
PRINT "Device configuration failure";
IF (V42 == 4) THEN
PRINT "Unable to read USERCODE/UES from device #", V84 + 1;
ENDPROC;
PROCEDURE L26 USES DEVICE_DATA, TEMP_DATA;
j = 0;
FOR i = 0 TO V1;
IF ((j <= V3) &&
((A13[i] & V4) != 0) &&
((A13[i] & 4) != 0)) THEN j = i + 1;
NEXT i;
IF (j > V3) THEN GOTO L27;
V2 = 0;
V3 = 0;
GOTO L29;
L27:
V2 = A12[j - 1];
V3 = j;
IF ((V4 == 32) || (V4 == 256) ||
(V4 == 512))
THEN GOTO L29;
IF (V58) THEN GOTO L28;
A41[9..0] = $066;
GOTO L29;
L28:
A41[9..0] = $006;
L29:
IF (V4 == 1) THEN A40[9..0] = $00E;
IF (V4 == 1) THEN A44[9..0] = $012;
IF (V4 == 2) THEN A40[9..0] = $38E;
IF (V4 == 2) THEN A44[9..0] = $392;
ENDPROC;
PROCEDURE L30 USES DEVICE_DATA, TEMP_DATA, L31
, L272
;
CALL L31;
IF (V32 == 0) THEN CALL L272;
V10 = 0;
V14 = 0;
V15 = 0;
V89 = 0;
V49 = 1;
V34 = 0;
V51 = -1;
V52 = -1;
V45 = 0;
V29 = 1;
IF (V103) THEN V29 = 0;
IF (V102 && V74) THEN V29 = 2;
ENDPROC;
PROCEDURE L31 USES DEVICE_DATA, TEMP_DATA;
FOR i = 0 TO V1;
A17[i] = (A13[i] | A48[i]);
IF (((A17[i] & 4) != 0) &&
((A17[i] & (1 | 256 | 2 | 512)) != 0) &&
!V102 && !V100 && !V103 && !V108 &&
!V107 && !V106 && V101) THEN
A17[i] = A17[i] & ~4;
IF (((A17[i] & 4) != 0) &&
((A17[i] & 32) != 0) && !V101 &&
(V102 || V100 || V103 || V108 ||
V107 || V106)) THEN
A17[i] = A17[i] & ~4;
NEXT i;
ENDPROC;
PROCEDURE L32 USES DEVICE_DATA, TEMP_DATA, L31;
INTEGER V79 = 32 * V0;
BOOLEAN A46[V79];
INTEGER A47[8];
INTEGER V145;
CALL L31;
STATE IDLE;
V27 = 0;
FOR i = 0 TO V1;
A18[9..0] = A39[(A25[i] - 1)..0];
IF ((A17[i] & (1 | 2 | 256 | 512)) != 0) THEN
A18[9..0] = $059;
IF ((A17[i] & 32) != 0) THEN
A18[9..0] = $006;
A32[(V27 + (A25[i] - 1))..V27] = A18[(A25[i] - 1)..0];
V27 = V27 + A25[i];
NEXT i;
IRSCAN V27, A32[(V27 - 1)..0];
WAIT IRPAUSE, 5 USEC, IDLE;
WAIT 3 CYCLES;
DRSCAN V79, A46[(V79 - 1)..0], CAPTURE A46[(V79 - 1)..0];
V27 = 0;
FOR i = 0 TO V1;
IF (A46[V27] == 1) THEN GOTO L33;
IF (V80) THEN
PRINT "Device #", V0 - i, " unable to read IDCODE";
IF (V101 && ((A17[i] & 32) != 0) &&
((A17[i] & 4) != 0)) THEN V42 = 6;
GOTO L34;
L33:
FOR j = 0 TO 7;
A47[j] = 0;
FOR k = 0 TO 3;
IF (A46[V27 + (4 * j) + k]) THEN
A47[j] = A47[j] | (1 << k);
NEXT k;
A47[j] = A47[j] + 48;
IF (A47[j] >= 58) THEN A47[j] = A47[j] + 7;
NEXT j;
IF (V80) THEN
PRINT "Device #", V0 - i, " IDCODE is ",
CHR$(A47[7]), CHR$(A47[6]),
CHR$(A47[5]), CHR$(A47[4]),
CHR$(A47[3]), CHR$(A47[2]),
CHR$(A47[1]), CHR$(A47[0]);
IF (V101 && ((A17[i] & 32) != 0) &&
((A17[i] & 4) != 0) && (A47[0] != 68) &&
(A47[1] != 68)) THEN
V42 = 6;
V27 = V27 + 31;
L34:
V27 = V27 + 1;
NEXT i;
V27 = 0;
FOR i = 0 TO V1;
IF(A61[i] != 0) THEN GOTO L32_3;
IF(A46[V27] != 0) THEN
V42 = 6;
V27 = V27 + 1;
NEXT i;
GOTO L32_4;
L32_3:
V145 = 0;
FOR j = 0 TO 31;
IF(A46[(V27 + j)]) THEN
V145 = V145 + (1 << j);
NEXT j;
V27 = V27 + 32;
IF(A61[i] != V145) THEN
V42 = 6;
NEXT i;
L32_4:
ENDPROC;
PROCEDURE L35 USES DEVICE_DATA, TEMP_DATA, L31, L276, L39;
j = 0;
k = V1;
V84 = V84 - 1;
IF (V84 == -1) THEN GOTO L37;
IF ((V84 < 0) || (V84 > V1) ||
(((A17[V1 - V84] & 256) == 0) &&
((A17[V1 - V84] & 32) == 0) &&
((A17[V1 - V84] & 512) == 0))) THEN
V42 = 4;
IF (V42 != 0) THEN GOTO L38;
L36:
j = V84;
k = V84;
L37:
CALL L31;
V4 = 256;
A18[9..0] = $006;
CALL L276;
V4 = 512;
A18[9..0] = $04A;
CALL L276;
WAIT 10000 USEC;
A18[9..0] = $3FF;
CALL L276;
STATE IDLE;
FOR i = 0 TO (V19 - 1);
A30[i] = 1;
NEXT i;
FOR i = j TO k;
V84 = i;
PUSH i; PUSH j; PUSH k;
CALL L31;
V4 = 0;
IF (((A17[V1 - V84] & 256) != 0) &&
((A17[V1 - V84] & 4) != 0)) THEN
V4 = 256;
IF (((A17[V1 - V84] & 32) != 0) &&
((A17[V1 - V84] & 4) != 0)) THEN
V4 = 32;
IF (((A17[V1 - V84] & 512) != 0) &&
((A17[V1 - V84] & 4) != 0)) THEN
V4 = 512;
IF (V4 != 0) THEN CALL L39;
POP k; POP j; POP i;
NEXT i;
L38:
ENDPROC;
PROCEDURE L39 USES DEVICE_DATA, TEMP_DATA, L276, L40;
j = V1 - V84;
FOR i = 0 TO V1;
IF (((A17[i] & V4) != 0) &&
((A17[i] & 4) != 0) && (i != j)) THEN
A17[i] = A17[i] | 8;
NEXT i;
IF (V4 == 256) THEN
A18[9..0] = $007;
IF (V4 == 512) THEN
A18[9..0] = $079;
IF (V4 == 32) THEN
A18[9..0] = $007;
CALL L276;
DRSCAN 32 + j, A30[(32 + j - 1)..0], CAPTURE A31[(32 + j - 1)..0];
V86 = 0;
FOR i = 0 TO 31;
IF (A31[i + j]) THEN
V86 = V86 | (1 << i);
NEXT i;
CALL L40;
ENDPROC;
PROCEDURE L40 USES DEVICE_DATA, TEMP_DATA;
INTEGER A58[8];
EXPORT "DEVICE", V84 + 1;
EXPORT "USERCODE", V86;
FOR i = 0 TO 7;
V27 = 0;
A58[i] = V86 & 15;
IF (A58[i] > 9) THEN V27 = 7;
A58[i] = A58[i] + 48 + V27;
V86 = V86 >> 4;
NEXT i;
PRINT "Device #", V84 + 1, " USERCODE code is ",
CHR$(A58[7]), CHR$(A58[6]),
CHR$(A58[5]), CHR$(A58[4]),
CHR$(A58[3]), CHR$(A58[2]),
CHR$(A58[1]), CHR$(A58[0]);
ENDPROC;
PROCEDURE L41 USES DEVICE_DATA, TEMP_DATA, L31
, L45
;
j = 0;
k = V1;
V34 = 1;
V29 = 1;
V84 = V84 - 1;
IF (V84 == -1) THEN GOTO L43;
IF ((V84 < 0) || (V84 > V1) ||
(((A17[V1 - V84] & 1) == 0) &&
((A17[V1 - V84] & 2) == 0))) THEN
V42 = 4;
IF (V42 != 0) THEN GOTO L44;
L42:
j = V84;
k = V84;
L43:
FOR i = j TO k;
V84 = i;
PUSH i; PUSH j; PUSH k;
CALL L31;
V86 = 0;
IF (((A17[V1 - V84] & 1) != 0) &&
((A17[V1 - V84] & 4) != 0)) THEN
CALL L45;
POP k; POP j; POP i;
NEXT i;
L44:
ENDPROC;
PROCEDURE L45 USES DEVICE_DATA, TEMP_DATA, L276, L287, L214, L157, L50;
V4 = 1;
A18[9..0] = $016;
CALL L276;
DRSCAN V21, A26[(V21 - 1)..0];
A18[9..0] = $01A;
CALL L276;
DRSCAN V21, A26[(V21 - 1)..0];
j = V1 - V84;
FOR i = 0 TO V1;
IF (((A17[i] & 1) != 0) && ((A17[i] & 4) != 0) &&
(i != j)) THEN A17[i] = A17[i] | 8;
NEXT i;
CALL L287;
V2 = A12[j];
V27 = (V2 - 1) * 2;
i = A49[V27];
V48 = A49[V27 + 1];
V46 = A6[V2];
IF (V48 < (V46 >> 1)) THEN GOTO L46;
V48 = V46 - V48 - 1;
L46:
V27 = j + V24 + (16 * V48) + 12;
FOR V11 = i TO i + 15;
PUSH i;
PUSH V27;
CALL L214;
CALL L157;
POP V27;
POP i;
IF (A31[V27]) THEN
V86 = V86 | (1 << (V11 - i));
NEXT V11;
CALL L50;
ENDPROC;
PROCEDURE L50 USES DEVICE_DATA, TEMP_DATA;
INTEGER V85[8];
EXPORT "DEVICE", V84 + 1;
EXPORT "UES", V86;
FOR i = 0 TO 3;
V27 = 0;
V85[i] = V86 & 15;
IF (V85[i] > 9) THEN V27 = 7;
V85[i] = V85[i] + 48 + V27;
V86 = V86 >> 4;
NEXT i;
PRINT "Device #", V84 + 1, " UES code is ",
CHR$(V85[3]), CHR$(V85[2]),
CHR$(V85[1]), CHR$(V85[0]);
ENDPROC;
PROCEDURE L55 USES DEVICE_DATA, TEMP_DATA, L30, L309, L214, L240;
PRINT "programming 7K device(s)...";
CALL L30;
CALL L309;
FOR V11 = 1 TO 107;
CALL L214;
CALL L240;
NEXT V11;
V49 = 1;
FOR V11 = 109 TO (V32 - 1);
CALL L214;
CALL L240;
NEXT V11;
ENDPROC;
PROCEDURE L69 USES DEVICE_DATA, TEMP_DATA, L276;
A18[9..0] = A41[9..0];
CALL L276;
A18[9..0] = A40[9..0];
CALL L276;
A18[9..0] = $00A;
CALL L276;
IF (V58) THEN V56 = 1;
WAIT (V38 * 1000) USEC;
IF (V58) THEN GOTO L70;
IF (V82) THEN V83 = 20000;
A18[9..0] = $06A;
CALL L276;
V83 = 5;
A18[9..0] = $06E;
CALL L276;
L70:
A18[9..0] = A44[9..0];
CALL L276;
ENDPROC;
PROCEDURE L71 USES DEVICE_DATA, TEMP_DATA, L276;
A18[9..0] = A41[9..0];
CALL L276;
A18[9..0] = $00A;
CALL L276;
IF (V58) THEN V56 = 1;
WAIT (V37 * 100) USEC;
IF (V58) THEN GOTO L72;
A18[9..0] = $06E;
CALL L276;
L72:
A18[9..0] = A44[9..0];
CALL L276;
ENDPROC;
PROCEDURE L73 USES DEVICE_DATA, TEMP_DATA, L31;
CALL L31;
FOR i = 0 TO V1;
IF (((A17[i] & 1) == 0) || ((A17[i] & 4) == 0))
THEN GOTO L74;
IF (V82 && ((A48[i] & 128) == 0))
THEN A17[i] = A17[i] | 8;
IF (!V82 && ((A48[i] & 128) != 0))
THEN A17[i] = A17[i] | 8;
L74:
NEXT i;
IF (V82) THEN A41[9..0] = $066;
IF (!V82 && V58) THEN A41[9..0] = $006;
ENDPROC;
PROCEDURE L75 USES DEVICE_DATA, TEMP_DATA, L276, L73, L69, L214, L240;
A18[9..0] = $012;
CALL L276;
A18[9..0] = $01E;
CALL L276;
DRSCAN V16, A30[(V16 - 1)..0];
L76:
CALL L73;
b = V58;
IF (V82) THEN V58 = 0;
CALL L69;
V58 = b;
IF (!V82) THEN GOTO L77;
V82 = 0;
GOTO L76;
L77:
A18[9..0] = $01E;
CALL L276;
DRSCAN V16, A29[(V16 - 1)..0];
IF (V103) THEN GOTO L78;
V75 = 1;
FOR V11 = 102 TO 103;
CALL L214;
CALL L240;
NEXT V11;
V75 = 0;
L78:
ENDPROC;
PROCEDURE L82 USES DEVICE_DATA, TEMP_DATA, L30, L309, L299, L214, L157;
IF (V74) THEN PRINT "blank checking 7K device(s)...";
IF (!V74) THEN PRINT "verifying 7K device(s)...";
CALL L30;
CALL L309;
CALL L299;
FOR V11 = 1 TO 101;
CALL L214;
CALL L157;
IF (V42 != 0) THEN V11 = 101;
NEXT V11;
IF (V42 != 0) THEN GOTO L84;
IF (V74 && !V103) THEN GOTO L83;
FOR V11 = 102 TO 103;
CALL L214;
CALL L157;
IF (V42 != 0) THEN V11 = 103;
NEXT V11;
L83:
IF (V42 != 0) THEN GOTO L84;
FOR V11 = 104 TO 107;
CALL L214;
CALL L157;
IF (V42 != 0) THEN V11 = 107;
NEXT V11;
IF (V42 != 0) THEN GOTO L84;
V45 = 1;
FOR V11 = 109 TO 113;
CALL L214;
CALL L157;
IF (V42 != 0) THEN V11 = 113;
NEXT V11;
IF (V42 != 0) THEN GOTO L84;
V45 = 0;
FOR V11 = 114 TO (V32 - 1);
CALL L214;
CALL L157;
IF (V42 != 0) THEN V11 = V32 - 1;
NEXT V11;
L84:
ENDPROC;
PROCEDURE L96 USES DEVICE_DATA, TEMP_DATA
, L82
;
V74 = 1;
IF (V4 == 1) THEN CALL L82;
V74 = 0;
ENDPROC;
PROCEDURE L97 USES DEVICE_DATA, TEMP_DATA, L30, L214, L157, L287, L31;
CALL L30;
V37 = 100;
V38 = 100;
V29 = 1;
V11 = 0;
CALL L214;
V34 = 1;
IF (USE_FIXED_ALGORITHM) THEN GOTO L98;
CALL L157;
GOTO L99;
L98:
CALL L287;
FOR i = 0 TO V20 - 1;
A31[i] = 0;
A57[i] = 0;
NEXT i;
L99:
FOR i = V1 TO 0 STEP -1;
A48[i] = 0;
IF (((A17[i] & 1) == 0) ||
((A17[i] & 4) == 0)) THEN GOTO L109;
V68 = 0;
FOR j = 0 TO i;
V26 = 0;
V2 = A12[j];
IF (i == j) THEN GOTO L100;